Shen Zhen MTC WR7502 User Manual
WR7502
750M Wireless Router
User Guide
Copyright statement
Is the registered trademark of Shenzhen MTC Co., LTD. All the products and
product names mentioned herein are the trademarks or registered trademarks of their
respective holders. Copyright of the whole product as integration, including its accessories
and software, belongs to Shenzhen MTC Co., LTD. No part of this publication can be
reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any
language in any form or by any means without the prior written permission of Shenzhen
MTC Co., LTD. If you would like to know more about our product information, please visit
our website at http://www.SZMTC.com.cn
Disclaimer
Pictures, images and product specifications herein are for references only. To
improve internal design, operational function, and/or reliability, MTC reserves the right to
make changes to the products described in this document without obligation to notify any
person or organization of such revisions or changes. MTC does not assume any liability
that may occur due to the use or application of the product or circuit layout(s) described
herein. Every effort has been made in the preparation of this document to ensure
accuracy of the contents, but all statements, information and recommendations in this
document do not constitute the warranty of any kind, express or implied.
FCC ID : 2AHVHWR7502
FCC STATEMENT
Warning: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
Note:This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.
FCC RF Radiation Exposure Statement:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
1）this device may not cause harmful interference
2）this device must accept any interference received, including interference that may cause
undesired operation.
“FCC RF Radiation Exposure Statement Caution: To maintain compliance with the FCC’s RF
exposure guidelines, place the product at least 20cm from nearby persons.”
FCC ID : 2AHVHWR7502
Important Safety Instructions
1. Do not open this product or attempt to service it; it may expose you to dangerous high
voltage or other risks.
2. Do not operate this product near water.
3. Do not place or operate this product near a radiator or a heat register.
4. Do not expose this product to dampness, dust or corrosive liquids.
5. Do not connect this product or disconnect it from a wall socket during a lightning or a
thunderstorm.
6. Do not block the ventilation slots of this product, for insufficient airflow may harm it.
7. Do not put anything on this product.
8. Plug this product directly into a wall socket (100-240V~, 50/60Hz). Do not use an
extension cord between this product and the AC power source.
9. When plugging this product into a wall socket, make sure that the electrical socket is
not damaged, and that there is no gas leakage.
10. Place the connecting cables properly so that people won’t stumble or walk on it.
11. This product should be operated from the type of power indicated on the marking label.
If you are not sure of the type of power available, consult the qualified technician.
12. Unplug this product from the mains and refer the product to qualified service
personnel for the following conditions:
1) If liquid has been spilled on the product.
2) If the product has been exposed to rain or water.
13. Unplug this product from the wall socket before cleaning. Use a damp cloth for
cleaning. Do not use liquid cleaners or aerosol cleaners.
14. The specification of the fuse is for WR7502 to avoid damage, please do not change
the fuse.
15. The Operating temperature is 0℃~40℃ (32℉~104℉). The Storage temperature is
-40℃~70℃ (-40℉~158℉).
16.This device is restricted to indoor operation only in the band 5150-5350MHz.(Only for
devices that support 802.11 5G Hz function)
ADAPTER INFORMATION
Model:SA12-050200U
Input:100~240V 50/60Hz 0.3A Max.
Output:DC 5V-1.5A
Preface
Thank you for choosing MTC! Please read this user guide before you start! This user
guide instructs you to install and configure your device. The WR7502 is used as an
example throughout this user guide.
ICON
Description
Note
This format is used to highlight information of
importance or special interest. Ignoring this type of
note may result in ineffective configurations, loss of
data or damage to device.
Tip
This format is used to highlight a procedure that will
save time or resources.
Knowledge Expansion
Description of fields on the device GUI.
This user guide uses the following formats to highlight special
messages:
Contents
Important Safety Instructions ................................................................................................................. 3
Preface ................................................................................................................................................... 4
Chapter1 Product Overview .................................................................................. 错误！未定义书签。
1.1 Introduction ................................................................................................. 错误！未定义书签。
1.2 LED Indicator ............................................................................................ 错误！未定义书签。
1.3 Physical Interfaces ................................................................................... 错误！未定义书签。
Chapter 2 Connecting Mechanism ................................................................... 错误！未定义书签。
2.1 Preparation ................................................................................................ 错误！未定义书签。
2.2 Hardware Connection .............................................................................. 错误！未定义书签。
2.3 Configure PC TCP/IP Settings ............................................................... 错误！未定义书签。
Chapter 3 Log in to the Router ......................................................................... 错误！未定义书签。
3.1 Log in ......................................................................................................... 错误！未定义书签。
3.2 Web Page .................................................................................................. 错误！未定义书签。
3.3 Web page Introduce to Layouts ............................................................. 错误！未定义书签。
Chapter 4 Features & Configurations ................................................................................................ 9
4.1 System Status ........................................................................................................................... 18
4.1.1 System Status ....................................................................................................................... 21
4.1.2 WAN Status ........................................................................................................................... 21
4.1.3 LAN Status ............................................................................................................................ 23
4.1.4 Wireless Status ..................................................................................................................... 23
4.2 Network Settings ........................................................................................................................ 25
4.2.1 LAN Setting ........................................................................................................................... 25
4.2.2 WAN Setting ......................................................................................................................... 26
4.2.3 MAC Address Clone .............................................................................................................. 30
4.3 WLAN Settings ......................................................................................................................... 31
4.3.1 Basic Settings ........................................................................................................................ 31
4.3.2 Security Settings ................................................................................................................... 33
4.3.4 Access Control ...................................................................................................................... 35
4.3.6 Connection Status ................................................................................................................ 36
4.4.1 Device Sharing ...................................................................................... 错误！未定义书签。
4.4.2 Media Server ........................................................................................ 错误！未定义书签。
4.4.4 User Accounts ....................................................................................... 错误！未定义书签。
4.6 DHCP Server ............................................................................................................................ 37
4.6.1 DHCP Server .......................................................................................................................... 37
4.6.2 DHCP List & Binding .............................................................................................................. 38
4.7 Virtual Server ............................................................................................................................ 39
4.7.1 Port Range ............................................................................................................................ 40
4.7.2 DMZ Settings ........................................................................................................................ 43
4.7.3 UPnP Settings ....................................................................................................................... 44
4.8 Security Settings ...................................................................................................................... 44
4.8.1 Client Filter ........................................................................................................................... 46
4.8.2 URL Filter .............................................................................................................................. 45
4.8.3 MAC Filter ............................................................................................................................. 47
4.8.5 Remote WEB ......................................................................................................................... 48
4.8.6 WAN Ping .............................................................................................................................. 49
4.9 Routing Settings ....................................................................................... 错误！未定义书签。
4.10 Triffic Control .......................................................................................... 错误！未定义书签。
4.11 System Tools .......................................................................................... 错误！未定义书签。
4.11.1 Time Settings ...................................................................................... 错误！未定义书签。
4.11.2 DDNS ................................................................................................... 错误！未定义书签。
4.11.3 Backup & Restore ............................................................................... 错误！未定义书签。
4.11.4 Firmware Update ................................................................................ 错误！未定义书签。
4.11.5 Restore to Factory .............................................................................. 错误！未定义书签。
4.11.6 Reboot ................................................................................................ 错误！未定义书签。
4.11.7 Change Password ............................................................................... 错误！未定义书签。
4.11.8 System Logs ........................................................................................ 错误！未定义书签。
Appendix .............................................................................................................. 错误！未定义书签。
1 Configure PC TCP/IP Settings .......................................................................... 错误！未定义书签。
Windows XP ................................................................................................... 错误！未定义书签。
2 FAQs ............................................................................................................. 错误！未定义书签。
3 Factory Default Settings ................................................................................. 错误！未定义书签。
Chapter1 Product Overview
1.1 Introduction
WR7502 is simultaneous Dual Band, with maximum speed up to 300Mbps 2.4G and
433Mbps 5G Hz.The router can bandwidth control and parental control, and has 3
external antennas.
Complies with IEEE 802.11a/b/g/n/ac and IEE802.3/3u.
1 WAN port,4 LAN ports.
Provide one USB2.0 port supporting file sharing.
Provide WPA/WPA2, WPA-PSK/WPA2-PSK encryptions.
Support auto-negotiation and auto MDI/MDIX.
Support PPPoE, Dynamic IP, Static IP,PPTP,L2TP cable internet access.
Support UPnP, Dynamic DNS, Static routing.
Support Virtual server, special application and DMZ Host.
Built-in firewall supports IP address filtering Domain name filtering and MAC filtering.
Built-in DHCP server supports automatic and dynamic IP address distribution.
LED
Meaning
Status
Description
SYS System
Blinking
The router has booted.
Solid
The router is booting or upgrading.
Off
Power is off or the router is not booted.
NET
Ethernet
Orange
The router is booting or can’t connect to Internet normally.
Green
There is device connected to the WAN port.
Off
No any device is connected to the WAN port.
2.4G
2.4G
Blinking
2.4G wireless is on and have data is transferring.
Off
2.4G wireless is disabled.
5G
5G
Blinking
The 5G wireless is on and has data is transferring.
Off
The 5G wireless is disabled.
LAN
LAN
Blinking
There is device connected to the Ethernet port(1,2,3,4).
Off
No any device connected to the Ethernet port(1,2,3,4).
WAN
WAN
Blinking
There is device connected to the WAN port.
Off
No any device is connected to the WAN port.
Item
Description
POWER
A Supply hub connected to power socket with power adapter (output 5V, 2A).
WAN Port
A port connected Internet with reticle.
LAN Port
Ports (1, 2, 3, 4) connected your computer.
RST Button
Press the button more than 10 seconds, the device will restore to its factory default.
USB Port
The USB port connects to a USB storage device .
1.2 LED Indicator
The LED indicator displays information about the device’s status.
1.3 Physical Interfaces
Below are physical interfaces on this router
Item
Description
Router
Find it in your package.
Power
adapter
Find it in your package.
PC
Should have a installed IE8 or higher browser.
Gather ISP
Information
DHCP, PPPOE or Static IP Internet Connection Type:
1. Ethernet Cable from the incoming Internet side: This is provided by
your ISP
2. ISP Information: Your Internet service provider (ISP) should have
provided you with all of the information needed to connect to the
Internet. If you cannot locate this information, ask your ISP to provide it
If your ISP uses a PPPOE Internet connection, you will need ISP login
name and password
If you use a DHCP Internet connection, no information is
needed
If your ISP gives you a fixed or static IP address for Internet
connection, you will need to gather the following information:
1) IP Address
2) Subnet Mask
3) Gateway
4) DNS Server
5) Alternate DNS Server (Optional)
Chapter 2 Connecting Mechanism
2.1 Preparation
Before you start the installation process, you need to prepare the following:
2.2 Hardware Connection
Note
------------------------------------------------------------------------------------------------------------------ Before connecting, please make sure that you can surf the internet in your computer to
use the reticle provided by ISP.
----------------------------------------------------------------------------------------------------------------------
-----------
① Please connect reticle which from ISP to your router's WAN port.
② Use another reticle to connect your computer Ethernet port with the router’s any LAN
port.
③ Connect the router’s power adapter. And the hardware connection is finished.
2.3 Configure PC TCP/IP Settings
Before you login the router, please make sure your computer set to "Obtain an IP
address automatically" and "Obtain DNS server address automatically" from the device.
① Click Start -> Control Panel.
② Click Network and Internet.
③ Click Network and Sharing Center.
④ Click Change adapter settings.
⑤ Click Local Area Connection and select Properties.
⑥ Select Internet Protocol Version 4 (TCP/IPv4) and click Properties.
⑦ Select Obtain an IP address automatically and click OK
⑧ Click OK on the Local Area Connection Properties window to save your settings
Chapter 3 Login the Router
3.1 Login
To access the Router’s Web-based Utility, launch a web browser such as Internet
Explorer or Firefox and enter http://192.168.1.1 in your browser's address bar. Press
“Enter”.
The system will automatically display the login page, please enter the correct the
password (default password is admin). Click the “Sign in” button or press “Enter”.
3.2 Web Page
After clicking the “Sign in” ,the system will display the router Web page. You can view
and modify settings here
Chapter 4 Features & Configurations
4.1Quick Setup
The “Quick Setup” function can help you use the router quickly. The Router has two
function “Router” “WISP”.
Parameters Specification:
Router: Retical connect WAN port and ISP(Internet Sever Provider),LAN port
connect PC(personal computer),and you can use Wifi.
WISP: Any Wifi as ISP,connect the Wifi, all WAN port and LAN port become LAN
port,connect these port to PC,you can surf the Internet,and you can use your
Wifi.
4.1.1 Set The Router Mode
① Select Operation mode of Router,including “Router” “WISP”
② Select your connection type,including “Static IP” “Dynamic IP” “PPPOE”
“PPTP” “L2TP”,we use “Static IP” “Dynamic IP” “PPPOE” as usually,
“PPTP” “L2TP” usually use by company.Using Static IP as example.
③ Set your 2.4G wifi and 5G wifi.
④ Click “Save” and you have setted the Router mode.
4.1.2 Set The WISP Mode
① Set operation mode of WISP
② Click “Open Scan” to scan wifi,then choosing an usable wifi,enter it’s
password.
③ Set your 2.4G wifi and 5G wifi.
④ Click “Save” and you have setted the WISP mode.
Loading...