Please read the user’s manual so as to keep your mobile phone in the best
condition.
The manual has been verified and reviewed to guarantee the accuracy.
Instructions and descriptions contained herein are accurate at the time of
publication. However, mobile phones developed afterwards and the
contents of their manual are subject to modification without further
notification. Our company reserves the rights in relation to the manual.
16. PC connect ...........................................................................................27
17. Original accessories............................................................................. 28
18. About the battery.................................................................................29
19. Maintenance and service ....................................................................30
20. Important safety directions ................................................................31
Contents
3
Safety Precautions
Please read the following concise rules carefully. Nonobservance to the
rules may lead to danger or violence of the laws. The user’s manual gives
details about the safety precautions.
Secure startup
Please don't start up the mobile phone in case it is
forbidden to use wireless equipment or the usage
thereof may result in any interference or danger.
Put traffic safety first
Please abide by all the local laws and regulations.
Drive the automobile with both hands. Put the
traffic safety first at drive.
Interference
Any wireless equipment may be subject to
interference, affecting its performance.
Power-off in hospital
Please comply with any related restrictions.
Turn the mobile off when you are close to medical
equipments.
Power-off on the plane
Please comply with any related restrictions. Usage
of wireless equipment may result in interference to
the plane.
Power-off when refueling
Please don's use the equipment in gas stations.
Don't use the equipment in the periphery of fuel or
chemicals.
Power-off in the periphery of blasting spots
Please comply with any related restrictions. Don't
use the equipment near the place of blasting.
Proper employment
Use the equipment only in proper locations as
described in the product document. If not necessary,
please don't touch the antenna point.
Employ proper maintenance service
Only qualified maintenance personnel are allowed
to install or repair the equipment.
4
Accessories and battery
Approved accessories and battery are to be used.
Please don't connect with unmatched products.
Waterproofing quality
The equipment is not waterproof/ Please keep it dry.
Backup
Back up or keep written records of important
information stored in the equipment.
Connecting with other devices
Please read the user's manual of the device for
detailed safety information when connecting the
equipment with other devices. Don't connect with
unmatched products.
Emergency call
Make sure the equipment is in the covered area of
the network service and the calling function is
activated. As per the specific requirements, press
the key of finish to clear the screen and return to the
standby state. Input the emergency call number and
press the call key. Tell the called your location.
About your mobile phone
Network service
Don't hang up before the called tells you to.
Please abide by the laws and regulations and respect the
local customs as well as others' privacies and legal rights
and interests (including the copyrights) when using
different functions of the mobile.
Turn on the mobile in order to use its functions (except for
the alarm clock). In case usage of the wireless equipment
may result in any interference or danger, please don't power
on.
You should apply to the wireless service provider for
opening of necessary services in order to use the phone
function of the equipment. Many functions of the
equipment require support of special network functions.
The functions may not apply to all networks. As for other
5
networks, you may have to reach necessary agreements
with the wireless service provider before using the network
services. You service provider will provide necessary
descriptions and interpret the charging standard to you.
Certain restrictions may be formulated by some networks,
which will affect the mode that you use the network service.
For example, in certain networks, not all the characters and
services in relation to language are supported.
You service provider may require forbidding to use or
turning off part of the functions. Then these functions will
not be shown in the equipment function list. Your
equipment may also be provided with some special
configurations, such as name of the function list, sequence
of the function list and change of icons. For more
Overview
Function Description
Password
information, please refer to your service provider.
The TV phone is a perfect combination of humanized
design and exquisite workmanship, the streamline and
ingenious body is comfortable to hold. With streamline and
ingenious frame, it feels comfortable to hold the mobile
phone in your hand. It supports TXT electronic book,
Blue-tooth, dual SIM cards with one standby, network
camera, camera, and etc.
It makes your work more convenient and your free time
more fun with florid colored screen, pleasant bells,
cartoon head portrait for incoming calls, strong file
management function (supporting T-FLASH card),
fashionable camera function and long time tape recording
function, music player, video player, supporting MMS.
Phone password
With the phone password, you can prevent others from
using your mobile phone without your approval. The
original phone password is 1122.
PIN
PIN (personal identification number) and UPIN (unique
personal identification number) (4-8 digit) help you to
prevent others to use you SIM card without your approval.
PUK
6
Input the 8 digit PUK (personal unlocking key) to change
the locked PIN and UPIN. Input PUK2 (of 8 digit) to
change the locked PIN2. If the keys are not provided
together with the SIM card, please inquire the local service
provider.
Restriction code
You have to input the restriction code (of 4 digit) to use the
operator determined barring function. Note that the
function requires support by SIM card.
1. Introduction
Insert the SIM card and the battery
Inserting/taking out T-FLASH CARD
Charging the battery
Ensure to turn off the equipment and disconnect with the
charger before taking out the battery.
Ask your SIM card dealer whether he has provided SIM
card service and the method of usage who may be service
provider or other dealers.
SIM card and its contacts are vulnerable to scratch or
bending. Attention shall be attached when use, insert or
take out the card.
Only use approved and compatible T-FLASH card
applicable to the mobile phone. Approved memory card
trade standard is applied; however, certain bands may not
be completely compatible with the mobile phone. Using
incompatible memory card may damage not only the card
and the mobile, but also the data stored in the card.
1. Turn off the mobile phone, remove the back cover and
take out the battery.
2. Slide the clip of memory card to unlock.
3. Lift the clip, and insert the card into it with the side of
golden contacts facing inwards.
4. Put down the clip and slide it to lock in position.
5. Put in the battery and install the back cover.
Check the model number of the charger before using it to
charge the mobile.
Only use approved battery, charger and accessories
applicable to the specific mobile model. Using other types
of battery, charger and accessories may violate the
certification or warranty terms of the equipment and may
7
result in danger.
Refer to the dealer for supply of relative approved
accessories. Hold the plug to plug out and cut off the power
supply of accessories instead of pulling the power cord.
1. Plug the charger in an AC power socket.
2. Insert the plug contact of the charger at the other end into
the jack at the side of the mobile.
If the battery runs out of electricity, you may have to wait
for a few minutes till the symbol of charging is shown on
the screen, and then you can make any call and answer any
call.
The time of charging depends on the charger you used.
Note: Please do not at the same time insert the charger
and USB data line, if inserted at the same time may
cause your computer and mobile phone damage (or lead
Startup and shutdown
2. Your Mobile Phone
Button and module
Await the opportune moment pattern
to USB data cable can not be identified).
Press the key of power supply to start up or shut down the
mobile phone.
If it is prompted to input PIN or UPIN, please input the
required password (shown as **** on the screen).
Antenna
Your mobile phone may be provided with built-in and
exposed antenna. Just like using any other radio
transmitting devices, don't touch the antenna if not
necessary because it may affect the quality of
telecommunication and result in equipment operating in an
energy level higher than required, thus shortening the
service life of the battery.
And think that mobile telephone is all set, but confesses to
be put into use, you are mobile telephone's turn to be in the
alert status when importing any character not yet.
Standby shortcut operation:
1. Press and hold “0” key in the standby interface
to enter system language changing interface to
change your language simply and quickly.
2. press side key can be turned on or off the electric
8
Lower the alert status rapid way
Dimout pattern
Icons at the top
torch。
After SIM card and mobile telephone deblocking succeeded,
mobile telephone will search for the network available
voluntarily. Way of escape machine searching for to the
network enter the alert status. May be in progress calling
batch and meet to listen to telephone , may carryout the
following operation:
Need to enter already batch of telephone listing, please
communicate by phone according to the once key. And then
roll to the required number or full name, the key may call
batch according to communicating by phone.
Need to call for your voicemail , keep self's hand on 1
please.
Think that system will rehabilitate acquiescing in value to
saving the electricity pattern's when you open province
pattern.
SIM 1 intensity of network no signals
SIM 2 intensity of network no signals
SIM1 a new SMS or inbox is full
SIM2 a new SMS or inbox is full
received SIM card1 a new MMS
received SIM card2 a new MMS
chat room one
9
chat room two
SIM1 missed call
SIM2 missed call
SIM1 unconditionally divert
SIM2 unconditionally divert
alarm clock active
Vibra and ring
Ring
Vibra then ring
Vibration only
battery
headset mode
Service message
10
Bluetooth mode
nWay Stopwatch
3. Communicate by phone function
Make Calls
You can use different way to allocate calling:
1. Import a telephone number , ask add District a number, and
then push down before fixing a telephone number to
communicate by phone key. And then need to allocate
dozen of international long distance call, (represent the
international dial-out code according to importing the
international long-distance yard "+" character) under two *
please, import the country or area code , area number
(according to needing "0" to import, and adding
unnecessarily in the area number front) and telephone
number.
2. Need to enter already batch of telephone listing , ask
communicate by phone under the alert status according to
the once key. Choose needed the number or the full name,
and then pushed down communicating by phone key.
3. Seek the name or telephone number storing up in the
address book. Be going to adjust sound volume in
communicating by phone, push down the sound volume
key upward or downward please.
4. The lead plane assignment key, is used to initiate the
incoming telegram calling for (think that the number
already imports or state moves downwards in the telephone
directory) , also may be used to meet listening to.
5. The subsidiary machine assignment key, is used to initiate
subsidiary machine calling for (thinking that the number
already imports or may be used to receive can of incoming
telegrams under telephone directory circumstances) .
Display screen meeting display allocates dozen of animated
cartoon time dialing, if being lead plane dialing , is able to
demonstrate "SIM card before the number 1 ", if being "2
be able to demonstrate SIM card" before subsidiary
machine dialing, is in a number. State the other party's
11
Loading...
+ 24 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.