Shenzhen High Power Tech H7920 User Manual

SHENZHEN HONGDIAN TECHNOLOGIES CO., LTD.
Mobile Data Communications
User Manual
Galaxy Mobile Router
(H7920)
MOBILE DATA COMMUNICATIONS
Galaxy Mobile Router
(H7920)
Notice:
Copyright
The contents of the manual are protected by Chinese law, any organization and/or person can not copy this manual or part of contents without Shenzhen Hongdian Technologies Co., Ltd. authorization in written.
Trademark
宏电
Hongdian宏电Hongdian
Hongdian, Hongdian Technologies and Shenzhen Hongdian are the logos and trademarks of Shenzhen Hongdian Technologies Co., Ltd. The other company trademarks and logos in this manual are owned by the owner, Hongdian does not have the right for those trademarks and logos.
Hongdian, GPRS/EDGE DTU, CDMA DTU, MDTU, Wireless DDN,
User Manual
Shenzhen Hongdian Technologies Co., Ltd.
West F6, Building 201, Terra Science & Tech Park, Chegongmiao, Shenzhen 51840, China
Tel: (755)88864288 Fax: (755)83404677
Website: www.hongdian.com
Postcode: 518040
www.mdtu.com
© Copyright 2006
M80-792001-01
Release 2.0.1
Abbreviations
APN Access Point Name
APP Application
ATM Asynchronous Transfer Mode
ATM Auto Table Machine
AuC Authentication Centre
BG Border Gateway
BGP Border Gateway Protocol
BSC Base Station Controller
BSS Base Station System
BSSGP BSS GPRS Protocol
BTS Base Transceiver System
CDMA Code Division Multiple Access
CDR Call Detail Record
CGF Charging Gateway Function
CLI Command Line Interface
CSD Circuit Switch Data
DDN Digital Data Network
DHCP Dynamic Host Configuration Protocol
DMZ DeMilitarized Zone
DNS Domain Name System
DSC Data Service Center
DTU Data Terminal Unit
EDGE Enhanced Data Rate for GSM Evolution
EGP External/Exterior Gateway Protocol
EIGRP External/Exterior Internet Group Routing Protocol
EMC Electro Magnetic Compatibility
ESP Electro Static Precautions
ETSI European Telecommunications Standards Institute
GGSN Gateway GPRS Support Node
GMSC Gateway MSC
GMSK Gaussian Minimum Shift Keying
GPRS General Packet Radio Service
GSM Global System for Mobile Communications
GSN GPRS Support Node
GTP GPRS Tunneling Protocol
GTP-id GTP Identity
HLR Home Location Register
HSCSD High Speed Circuit Switch Data
IGMP Internet Group Management Protocol
IGRP Internet Gateway Routing Protocol
IN Intelligent Network
IP Internet Protocol
IPv4 IP version 4
IPv6 IP version 6
IPSEC IP Secure Protocol
ISDN Integrated Services Digital Network
ISP Internet Service Provider
L2TP Layer 2 Tunneling Protocol
LA Location Area
LLC Logical Link Control
MAP Mobile Application Part
MDNS Mobile Domain Name System
MDTU Mobile Data Terminal Unit
MIB Management Information Base
MS Mobile Station
MSC Mobile Switching Center
MT Mobile Terminal
MTBF Mean Time between Failures
MTTR Mean Time to Recovery
N/A Not Applicable
NAS Network Access Server
NAT Network Address Translation
NTP Network Time Protocol
O&M Operations & Maintenance
PAP Password Authentication Protocol
PDP Packet Data Protocol
PDN Packet Data Network
PDSN Packet Data Serving Node
PLMN Public Land Mobile Network
POS Point of Sales
PTM-G Point-to-Multipoint Group Call
PTM-M Point-to-Multipoint Multicast
QoS Quality of Service
RA Routing Area
RADIUS Remote Authentication Dial In User Service
RIP Routing Information Protocol
RSC Register Service Center
RTOS Real Time Operating System
RTP Real-time Transport Protocol
RTU Remote Terminal Unit
RSVP Resource reSerVation Protocol
SCADA Supervisory Control and Data Acquisition
SGSN Serving GPRS Support Node
SIM Subscriber Identify Module
SMS Short Message Service
SMSC Short Message Service Center
SNMP Simple Network Management Protocol
STK SIM Tool Kits
TCP Transmission Control Protocol
TDMA Time Division Multiple Access
TMN Telecommunication Managed Network
UDP User Datagram Protocol
UIM User Identify Module
UMTS Universal Mobile Telecommunication System
USSD Unstructured Supplementary Service Data
UTK UIM Tool Kits
VLR Visitor Location Register
WAN Wide Area Network
WAP Wireless Application Protocol
WDDN Wireless Digital Data Network
Contents
CHAPTER 1
1.1 GENERAL .....................................................................................................................1
1.2 SYSTEM FEATURES ..................................................................................................2
1.3 SPECIFICATIONS .......................................................................................................3
1.4 TYPICAL APPLICATIONS........................................................................................4
1.5 TYPES DESCRIPTION ...............................................................................................7
CHAPTER 2 INSTALLATION.....................................................................................8
2.1 GENERAL .....................................................................................................................8
2.2 OPEN BOX ....................................................................................................................8
2.3 INSTALLATION AND CABLE CONNECTION......................................................8
2.4 GROUND .....................................................................................................................12
2.5 POWER SUPPLY .......................................................................................................12
2.6 CHECK THE MOBILE NETWORK .......................................................................13
INTRODUCTION ...................................................................................1
CHAPTER 3
3.1 CONNECTION............................................................................................................14
3.2 CONFIGURATIONS..................................................................................................18
3.2.1 ROUTER STATUS ..................................................................................................21
3.2.2 ONLINE HELP ........................................................................................................22
3.2.3 SYSTEM TOOLS.....................................................................................................23
3.2.4 NETWORK SETTING............................................................................................27
3.2.5 ROUTE CONFIGURATION..................................................................................34
3.2.6 SPECIAL SETTING................................................................................................40
3.2.7 HONGDIAN PRODUCTS.......................................................................................47
3.2.8 LOGOFF ...................................................................................................................47
3.2.9 FIRMWARE UPDATE............................................................................................47
3.3 CLI OPERATION....................................................................................................48
CHAPTER 4 OPERATION INSTRUCTION............................................................49
4.1 PANEL INDICATION................................................................................................49
4.2 OPERATION...............................................................................................................50
4.3 TROUBLE SHOOTING.............................................................................................50
APPENDIX 1: HYPERTEXT TERMINAL SETTING.................................................52
APPENDIX 2: FIRMWARE UPDATE TOOL ..............................................................56
ROUTER CONFIGURATION ............................................................14
Galaxy H7920 Mobile Router User Manual Chapter 1: Introduction
Chapter 1 Introduction
This chapter introduces the Galaxy H7920 Mobile Router general descriptions, features and philosophy.
1. General
2. System Features
3. Specifications
4. Typical Applications
5. Types Description
1.1 General
2.5G mobile communication technology (GPRS/EDGE/CDMA 1x) has become widely used of industrials and utilities in recent years and many customers are seeking reliable, flexible and cost-effective data channel to build their information system. Many applications such as ATM, POS, SCADA and surveillance system will require data channels covered all country; this brings a bright future for GPRS/EDGE and CDMA 1x data networks applications.
Requirements towards information system are varied because of different features of numerous industrial applications. Mobile telecom service providers are required to provide industrial application solutions not only meeting common specifications and also individual special ones. Hence, Hongdian co-operates with mobile service providers to design products and network configurations suitable to industrial end users’ individualized applications. Hongdian has developed embedded, advanced and reliable Galaxy mobile (GPRS/EDGE/CDMA 1x) router for the applications.
Galaxy H7920 Mobile Router User Manual Chapter 1: Introduction
GPRS network theoretically can provide a maximum bandwidth 171.2Kbps, actually; it works at 40~100Kbps bandwidth (it depends on service provider’s operation policy). As we know, GPRS is packet based network which provides TCP/IP communication channel.
Same as GPRS/EDGE network, CDMA 1x network can provide a maximum bandwidth up to 300Kb/s and actual transmitting and receiving bandwidth reaches 100Kb/s.
Typical center to multipoint system configuration plan is as below.
GPRS or
GPRS or
GPRS or
GPRS or
GPRS or
GPRS or
CDMA 1X
CDMA 1X
CDMA 1X
CDMA 1X
CDMA 1X
CDMA 1X
Network
Network
Network
Network
Network
Network
Internet
Internet
Internet
Internet
Internet
Internet
Video Server
Video Server
M80-792001-01
Requirements are different from customer to customer; below paragraphs will describe the typical applications.
Since Hongdian has many years experience of mobile data communication, it proves that Hongdian products are widely applied and work stably. Galaxy router is a dedicated ideal data transmission channel for industrial applications. The manual explains setup procedure of H7920 router and provides the system operation guide.
1.2 System Features
Basic Features
GPRS/EDGE Part
Support dual band GSM/GPRS/EDGE Complies with ETSI GSM Phase 2+Standard
CDMA Part
Support 800/1900MHz band Complies with FCC/SAR and CDG 1/2&3
1
Real time clock
M80-792001-01
2
Galaxy H7920 Mobile Router User Manual Chapter 1: Introduction
Galaxy H7920 Mobile Router User Manual Chapter 1: Introduction
Enhanced Features
Advanced Features
1.3 Specifications
Galaxy router specifications
GPRS/EDGE data
CDMA 1x data
Interface
Support multiple protocol conversion Support data center and network management Online detection and redial Online/Offline control
Online/Offline controlled by user’s equipment Online/Offline triggered by user’s data
Timing online/offline STK/UTK card special function configuration Support Ethernet and RS-232/485 interface Synchronize with CDMA network Self-diagnostic Optimize EMC design
Built-in DHCP server Firewall and NAT Support DMZ Support dynamic DDNS Support VPN (Optional) Support path routing Support envelop filtering Support mobile network traffic counting Support SNMP V1, V2c (V3 ready) Support NTP Support Ethernet or dial-up network backup WEB/Telnet management interface Acquire specify PPP server IP address Local/Remote firmware upgrade Local/Remote configuration profile backup
GPRS/EDGE Class 2~10 Code plan: CS1~CS4 Complied with SMG31bis specifications
Support IS 707 data service Support 153kbps packet data Support Class 2.0 Group 3 facsimile CDMA 2000 spread spectrum Complied with IS-95A, IS-95B CDMA interface
Antenna: 50/SMA Female SIM/UIM: 3V Serial port (DB9): RS-232(DCE) or RS-485 (Optional) Serial port data rate: 300~115,200 bits/s Ethernet interface: 10/100BaseT/RJ45 (Auto sense) Configuration: WEB/Telnet or RS-232
Power
Voltage: +5VDC(+7.5~24VDC Optional) Consumption
Max. current: 430mA@+5VDC Standby: 30mA@+5VDC
Others
Measurement: 98x100x23 (not including antenna and fixed parts) Weight: 230g Operation temperature: -10~+50ºC Store temperature: -20~+75ºC Relative humidity: 95%(non-condensing)
1.4 Typical Applications
Galaxy router typical applications are described as below.
Application 1: Direct connection
Refer to following diagram, connect Galaxy router to your terminal.
Application 2: Center to multipoint
For industrial applications, it requires a device to collect information from discrete remote sites. The application show as below diagram is a typical video surveillance configuration. You can connect Galaxy router to a net-camera and then setup the Data Service Center (DSC) IP address or domain name at Galaxy router.
Internet
Internet
Internet
Internet
GPRS or
GPRS or
GPRS or
GPRS or
CDMA 1X
CDMA 1X
CDMA 1X
CDMA 1X
Network
Network
Network
Network
M80-792001-01
3
M80-792001-01
4
Galaxy H7920 Mobile Router User Manual Chapter 1: Introduction
GPRS or
GPRS or
GPRS or
GPRS or
GPRS or
GPRS or
CDMA 1X
CDMA 1X
CDMA 1X
CDMA 1X
CDMA 1X
CDMA 1X
Network
Network
Network
Network
Network
Network
Internet
Internet
Internet
Internet
Internet
Internet
Galaxy H7920 Mobile Router User Manual Chapter 1: Introduction
GPRS or
GPRS or
GPRS or
GPRS or
CDMA 1X
CDMA 1X
CDMA 1X
CDMA 1X
Network
Network
Network
Network
Internet
Internet
Internet
Internet
RS-232RS-232
Video Server
Video Server
Application 3: Ethernet connection
Galaxy router can be configured as following network applications.
Ethernet/Mobile network routing. Serial port/Ethernet converter. Serial port/Mobile network transmission.
Ethernet/Mobile network routing
By connecting your LAN and mobile network (WAN), you can share the GPRS/EDGE or CDMA 1x access to your LAN by built-in NAT (Network Address Translation) technologies. Therefore, multiple IP terminals or PCs can share the Internet access via Galaxy router.
GPRS or
GPRS or
GPRS or
GPRS or
GPRS or
GPRS or
CDMA 1X
CDMA 1X
CDMA 1X
CDMA 1X
CDMA 1X
CDMA 1X
Network
Network
Network
Network
Network
Network
Internet
Internet
Internet
Internet
Internet
Internet
Serial port/Mobile network transmission
It is the solution to convert and transmit non IP device data over TCP/IP based mobile data network (GPRS/EDGE/CDMA 1x). Connect the non IP device to the Galaxy serial port.
GPRS or
GPRS or
GPRS or
GPRS or
GPRS or
GPRS or
CDMA 1X
CDMA 1X
CDMA 1X
CDMA 1X
CDMA 1X
CDMA 1X
Network
Network
Network
Network
Network
Internet
Internet
Internet
Internet
Internet
Internet
Network
RS-232
RS-232
Application 4: Mobile Network/PSTN backup
Galaxy H7920 can be connected to mobile network, PSTN dialup network and Ethernet, those channels can be backup each other with the built-up backup function.
Bellow diagram is a typical solution for finance application. At the normal situation, the transaction data generated by POS or ATM will be transmitted via GPRS/EDGE or CDMA 1X network. When the mobile network failed, Galaxy router will dial the modem connected at its COM port, and then route the data via the dial-up channel. It is a very useful solution for finance application and other applications that requires high availability.
Serial port/Ethernet converter
For many non IP traditional terminals, you can also connect your non IP terminals to Galaxy router via RS232/485 interface. After then, your non IP terminal will become standard TCP/IP 10/100BaseT interface network equipment. It is possible to connect many non IP terminals to IP network at same place.
M80-792001-01
5
M80-792001-01
6
Galaxy H7920 Mobile Router User Manual Chapter 1: Introduction
Galaxy H7920 Mobile Router User Manual Chapter 2: Installation
1.5 Types Description
Galaxy router is a product designed at Hongdian platform with customer specified application options. It complies with the different industrial applications and different service provider mobile data network. In order to identify different products, we explain the type name as below:
Galaxy router type: H7920-XYZn
H7920 X-Data
Hongdian Galaxy mobile router H7920 platform
* Z=Radio Module Manufacturer, n=Radio Module (can be null), i.e.: M2=Motorola G24
For Example: H7920-RGM2 -- Galaxy GPRS Router, built-in with Motorola G24 radio module.
POS
POS
Galaxy H7920
Galaxy H7920
V.90 Modem
V.90 Modem
ATM
ATM
interface R-Router C-CDMA network
Router
Router
GPRS/EDGE
GPRS/EDGE
GPRS/EDGE
GPRS/EDGE
CDMA
CDMA
CDMA
CDMA
PSTN
PSTN
PSTN
PSTN
PSTN backup
PSTN backup
Y-Mobile network Zn- Radio Module
E-EDGE Network G-GPRS network
Manufacturer* A-AnyData B-BenQ E-Sony Ericsson H-Huawei M-Motorola S-Siemens W-Wavecom Z-ZTE ……
Chapter 2 Installation
This chapter describes the Galaxy router installation procedures, power on and initial setup.
1. General
2. Open Box
3. Installation and Cable Connection
4. Grounding
5. Power Supply
6. Check the Mobile Network
2.1 General
2.2 Open Box
Galaxy router should be installed and configured properly before putting it in service. The installation and configuration should be done or supervised by Hongdian qualified engineer.
Attention:
Do not install Galaxy router or connect/disconnect its cable when it is power on.
In order to protect products during shipment, Galaxy mobile router has been packed properly. You may need to keep the packing materials for reshipping after you open the pack box.
Galaxy mobile router package includes.
Galaxy mobile router 1 (packed according order) +5V power adapter 1 (+12V power adapter Optional) Fixed part 1 pair CAT-5 UTP cable 1 User manual 1 (CD-ROM) Qualified & Repair Card 1
Optional accessories
Standard antenna Vehicle antenna Directional antenna Coaxial feeder (SMA interface)
After you open the box, you should count it carefully with your purchase order.
M80-792001-01
2.3 Installation and Cable Connection
Installation requirements
A PC with Ethernet interface and TCP/IP protocol
IE5.0 or up Internet browser 1024x768 monitor
7
M80-792001-01
8
Galaxy H7920 Mobile Router User Manual Chapter 2: Installation
Galaxy H7920 Mobile Router User Manual Chapter 2: Installation
A valid GPRS/EDGE SIM card or CDMA 1X UIM card (Depends router
type)
Galaxy router should be placed on desktop, wall or any other fixed place. There is no special requirement for wiring and heating dispersion. However, it is required to place Galaxy router apart from:
Heating device Dusty and moist environments Interference source, such as metal wall, microwave oven
The antenna should be installed at correct place and angle to ensure the GPRS/EDGE or CDMA 1x signal receiving. Do not install antenna inside of metal cabinet.
Measurement
The below diagram is Galaxy router outside and installation measurement.
LINK
NET
RUN
10M
宏电
Hongdian
Galaxy
CDMA 1x路由器
型号:H7920-RCZ
接口:RS-232/Ethernet 电源:+7.5~+12VDC
深圳市宏电技术开发有限公司
Shenzhen Hongdian Technologies Co., Ltd.
http://www.hongdian.com
Made in Shenzhen, China
Panels
Front Panel
Galaxy H7920 Router Front Panel
LED description:
10M: 10BaseT LED, lights up when connected with 10M link. LINK: LAN LED, lights up when connected. NET: Radio network LED, blinking during login, lights up when logged
in (Depends network, check the definitions at Online Help).
RUN: Galaxy router LED, blinking means normal operation.
The SIM or UIM card can be inserted and released by pressing the SIM/UIM card drawer button.
Rear Panel
All Galaxy router connectors are located at the rear panel.
M80-792001-01
COM RJ45 DC RESET ANT
Galaxy Router Rear Panel
9
M80-792001-01
10
Galaxy H7920 Mobile Router User Manual Chapter 2: Installation
Connectors’ description:
COM: Serial port (RS-232/485), serial data port or console port. RJ45: 10/100BaseT auto sense Ethernet interface. DC: DC power supply interface (+5VDC, +7.5V~+24VDC optional,
check the label before power on.)
RESET: Reset button, press and hold for 5 seconds to reset the
Galaxy router back to its default factory configurations.
ANT: Antenna interface (SMA female), standard, vehicle antenna,
directional antenna optional.
DB-9 connector (DCE-Female)
PIN Signal Description Direction Note
1 CD Carrier Detect -- 2 RXD Received Data -- 3 TXD Transmitted Data -- 4 DTR Data Terminal Ready -- 5 GND Signal Ground 6 DSR Data Set Ready -- 7 RTS Request To Send -- 8 CTS Clear To Send -- 9 RI Ring Indicator --
11
Click “Start” -> “System Tools” -> “Default Setting” to reset the Galaxy router back to its default factory configurations. If you have forgotten the login password, press and hold RESET button for 5 seconds.
The Galaxy router will be back to the factory default configurations if the RESET button is pressed up to 5 seconds.
Management webpage address: 192.168.8.1 Login name: admin, Password: hongdian
Interface and cable connection
COM – Serial Port
COM serial port is standard, DB9 (Female) RS-232(DCE) interface (RS-485 optional); it can be assigned to CONSOLE port or data port.
RS-232(DCE) connector PIN definition:
For CONSOLE mode, the PC serial port that connects the Galaxy router should be configured to 57600, 8, N, 1; and then you can start a Hypertext Terminal at the PC, type commands to manage Galaxy router.
Galaxy router has a feature of the dial-up backup routing. Customer can connect a dial-up modem to the router COM port. A special cable will be required. The detail cable wiring is showed at the below diagram.
M80-792001-01
Galaxy H7920 Mobile Router User Manual Chapter 2: Installation
RS-232 Modem
RS-232 Modem
RS-232 DB9 (Male)RS-232 DB9 (Male)
RS-232 DB9 (Male)RS-232 DB9 (Male)
CD 1
CD 1 RX 2
RX 2
TX 3
TX 3
DTR 4
DTR 4
GND 5
GND 5
DSR 6
DSR 6 RTS 7
RTS 7 CTS 8
CTS 8
RING 9
RING 9
RJ45 – Ethernet
It is standard 10/100BaseT Ethernet interface (Auto sense).
DC – Power
DC power supply interface (+5VDC, +7.5V~+24VDC optional, check the label before power on.)
The power adapter output current should be not less 2A; Power supply ripple should be less 300mV.
ANT - Antenna
Standard 5O/SMA RF connector (Female)
For outdoor use, lightning should be considered. We propose to install an arrester between antenna and the ANT interface.
1 CD
1 CD 2 RX
2 RX 3 TX
3 TX 4 DTR
4 DTR 5 GND
5 GND 6 DSR
6 DSR 7 RTS
7 RTS 8 CTS
8 CTS 9 RING
9 RING
2.4 Ground
To ensure a safe, stable and reliable Galaxy mobile router operation, DTU cabinet should be grounded properly. Connect the Galaxy mobile router cabinet to site ground wire.
2.5 Power Supply
Galaxy router is designed with advanced power management technologies; it can operate standalone. The input DC power voltage is +5VDC (+7.5V~+24VDC optional). You should check the Galaxy router label before power on.
The power adapter output current should be not less 2A; Power supply ripple should be less 300mV.
M80-792001-01
12
Loading...
+ 23 hidden pages