Shenzhen Gongjin Electronics AP699E8, AP699E8.1U10-4 User Manual

AP699E8.1U10-4

AP Router User manual

Ver: 1.0

Contents

Chapter 1 Introduction

The AP699E8.1U10-4, a Wireless Area Network(WLAN) Access Point supporting 802.11 b/g/n, bringing high-speed wireless

Internet connection to a home or office, can provide the transmission of broadband data service. It is suitable for using in a wide

range of both residential (in-home) and commercial (offices, apartments, hotels, warehouses) network applications. It gives you a

blazing fast connection to the internet, far fast and more convenient. The AP699E8.1U10-4 Access Point is a high-performance

wireless gateway and can support downstream up to 300Mbps and upstream up to 300Mbps.

AP699E8.1U10-4 has a megabit wide area network(WAN) port connecting external internet network. Using 802.11 b/g/n

wireless technology, Wi-Fi enabled computers and devices can wirelessly connect to the AP699E8.1U10-4 and share a single

incoming Internet connection. With four additional local Ethernet LAN ports, you can connect four different PCs sharing

Internet connection.

A Web-based user interface allows you to easily modify settings to connect to your Internet Service Provider (ISP). This Web

interface also provides traffic statistics, connection speed, and other detailed information.

The AP699E8.1U10-4 supports DHCP client, DHCP server, as well as NAT/NAPT functions. As a DHCP client,

AP699E8.1U10-4 can dynamicly acquire external internet IP address. As a DHCP client, AP699E8.1U10-4 can dynamicly alloc

local IP addresses to the associated wireless stations and wired LAN port PCs. NAT/NAPT implements local IP

address and external IP address conversion.

The AP699E8.1U10-4 supports static IP, Dynamic IP, as well as PPPoE connections, and works with applications such as online

gaming and VPN transparent connections with no additional configuration.

The AP699E8.1U10-4 is easily upgradeable, making it future-proof for both end-users and service providers. Whether it’s for a

home user who wants to share wireless high-speed Internet access or for a small office that needs Internet access for conducting

essential business activities, the AP699E8.1U10-4 is the ideal wireless broadband solution.

Product Outline

4

Product topology

Applications

l Home and SOHO wireless gateway

l The small enterprise Applications

l TV over IP (IPTV)
l Voice over IP (VoIP)
l Higher data rate broadband sharing
l Shared broadband internet access
l Audio and video streaming and transfer
l PC file and application sharing

l Network and online gaming

Compliance Certificates

l Wi-Fi Certification

l FCC Class B

l CE Mark

Feature

l IEEE802.11 compatible b/g/n draft 2.0 access ponit
l Antenna configurations: 2T3R Modes
l Support 64/128-bit WEP, 802.1x, WPA, and WPA2 for wireless security
l Support 802.11e wireless multimedia Qos
l Support 802.11f inter AP handover
l Support mutiple SSID
l SSID hide
l Support VLAN
l MAC address access control list
l MAC addresses self-learning
l Support transparent bridging
l VPN Pass Through on L2TP, PPTP, IPSec
l DHCP Server and Client
l Support static IP routing
l Support NAT、NAPT
l Support DMZ
l Support IP QoS

5

l telnet, HTTP Web Management, TFTP for Firmware Upgrade
l wireless signal rates: 54, 48, 36, 24, 18, 12, 9, 6 Mb/s for 802.11g; 11, 5.5, 2, 1 Mb/s for 802.11b; 11n (20MHz): MCS0-15

with Short Guard Interval Support (up to 144Mbps )11n (40MHz): MCS0-15 with Short Guard Interval Support (up to
300Mbps ).

l UDP throughput: up to 128Mbps
l Support UpnP

l 100M wide area network(WAN) port x1

10M/100M local area network(LAN) port x4

l Support RTS/CTS, Fragmentation and Defragmentation function
l Support WMM , WMM-PS
l Block Ack
l Reverse Direction Data Flow
l Link Adaptation
l Roaming
l Seamlessly roam and handover within mesh network
l Adaptive mesh network routing establish and update
l Wireless Frequency Range, 2.4 ~ 2.4835GHz ISM Band,
l Radio and Modulation Type. IEEE 802.11b: DQPSK, DBPSK, DSSS, and CCK ; IEEE 802.11 g: BPSK, QPSK, 16QAM,

64QAM ; IEEE 802.11n: MCS0~MCS15;

l Transimission distance. 300 meters Outdoors, 100 meters Indoors coverage area(It’s limited in an environment.)
l Antenna 5dBi

l Transimission power. 802.11b: Typ. 18 dBm @Normal Temp Range; 802.11g: Typ. 15 dBm @ Normal Temp Range ;

802.11n: Typ. 15 dBm @ Normal Temp Range

External Connectors

l 4 10/100M local Ethernet Ports (RJ-45)

l 1 100M WAN port

Security Support

l Three level login including local admin, local user and remote technical support access
l Service access control based on incoming interface: WAN or LAN
l Service access control based on source IP addresses
l Protect DOS attacks from WAN/LAN: SYN flooding, IP surfing, ping of Death, fragile, - UDP ECHO (port 7), teardrop, land.
l PAP (RFC1334), CHAP (RFC1994), MSCHAP for PPP session.

l IP filter, Parental control.

Environment

l Operating temperature: 0℃ to 40℃

l Storage temperature: -20℃ to 70℃
l Operating Humidity: 10%~95% no freezing

l Storage humidity: 5%~95% no freezing

Chapter 2 Hardware Installation

This chapter contains the information you need to install and set up the Wireless 2880AP. It covers
the following topics:

n Decide where to place the AP
n Connecting the Access Point
n Checking the LED indicators
n Attaching an External Antenna

Decide where to place the AP

Place the AP in a dry, clean location near the hub, switch, computer or printer that will be connected
to the AP. The location must have a power source and be within the following distance of a Wi-Fi
compliant wireless LAN access point or wireless access point.

6

The key to maximizing the wireless range is to follow these basic guidelines:

n Keep your product away (at least 3-6 feet or 1-2 meters) from electrical devices or appliances

that generate RF noise. The location should be away from transformers, heavy-duty motors,
fluorescent lights, microwave ovens, refrigerators.

n Keep the number of walls and ceilings between the AP and other network devices to a minimum - each

wall or ceiling can reduce your AP’s range from 3-90 feet (1-30 meters.) Position your devices so
that the number of walls or ceilings is minimized.

n Be a ware of the direct line between network devices. A wall that is 1.5 feet thick (0.5 meters),

at a 45-degree angle appears to be almost 3 feet (1 meter) thick. At a 2-degree angle it looks
over 42 feet (14 meters) thick! Position devices so that the signal will travel straight through a
wall or ceiling (instead of at an angle) for better reception.

n Building materials can impede the wireless signal - a solid metal door or aluminum studs may have

a negative effect on range. Try to position wireless devices and computers with wireless adapters
so that the signal passes through drywall or open doorways and not other materials.

Checking the LED Indicators

When the AP is connected to power, LEDs indicate activity as follows:

LED Color Activity

Power Green On: Power On

Off:Power Off

WLAN Green On: WLAN On

7

Blinking: sending/receiving data from wireless LAN

Off: Transmitter is off

LAN Green On: Good Link

Blink ing: sending/receiving data from LAN Port

Off: No link

WPS Green On:WPS Start’

Off:WPS Close

Security Green On:Security Start

Off:Security Close

Attaching an External Antenna

This AP comes with an antenna. It is external removable monopole signal-band 2.4 GHz antenna. It can be
rotated over 90 degrees and is omni-directional with a gain of less than 2 dBi. You can change a 5dBi
high gain antenna for creates a superior far-reaching wireless network

Charpter 3 CONFIGURING THE WIRELESS AP

If the default AP configuration does not meet your network requirements, or if you want to customize
the settings for your own network, you can directly connect to the device through it’s Ethernet port or
wireless to change the configuration. There are two typical applications:

1. Networks with a DHCP Server

If your network has a DHCP server, an IP address is automatic ally assigned to the AP. It takes between

one and two minutes for the Access Point to determine if there is a DHCP server on the network. After
you determine the AP’s IP address, you can enter that IP address into a web browser on a computer on
the same subnet to view the Access Point’s system status or change its configuration

2. Networks without a DHCP Server
If your network does not have a DHCP server, the Access Point uses a factory assigned IP address
(10.10.10.254). You can use that IP address to configure the Access Point, or you can assign a new IP
address to the Access Point.
To verify that the Access Point is using the default IP address assigned at the factory: Connect a
computer directly to the Access Point using the supplied standard Category 5 UTP Ethernet cable. Enter
the Access Point’s default IP address (10.10.10.254) into the computer’s web browser. If the
Configuration Management System starts, the Access Point is using the factory assigned IP address. You
can configure the Access Point with the Web interface:
Username, type admin (case sensitive)
Password, type admin
Click ok.

8

In the following, you will learn how to configure the basic functionsof your wireless AP.

Language Configuration

The 2880AP support multi-language.After login on the web UI ,You can click open all to choose the
Language English or Traditional Chinese from the drop list.And you can choose Status and Statics to
view information about the AP.

9