SHENZHEN CHAINWAY IN
FORMATION TECHNOLOGY
CO., LTD
V600 User Manual
2017-10-25
V600 User Manual
1
V600 User Manual
2
Contents
Statement .......................................................................................... 4
Chapter 1 Introduction ....................................................................... 6
Chapter 2 Installation ........................................................................ 7
2.1 Extrinsic feature ....................................................................... 7
2.2 SIM card and Micro SD card installation ................................ 10
2.3 Power connection .................................................................. 10
2.4 Power Button ......................................................................... 11
Chapter 3 Data Acquisition .............................................................. 12
3.1 RFID ...................................................................................... 12
3.1.1 14443A ............................................................................ 12
3.1.2 14443B ........................................................................ 14
3.2 Fingerprint ......................................................................... 15
3.3 Camera ............................................................................. 16
3.3.1 Front Camera .................................................................. 16
3.3.2 External Camera (optional) .......................................... 17
3.4 OBD .................................................................................. 20
Chapter 4 Network Communication ................................................. 21
4.1 Phone ................................................................................ 21
4.1.1 Phone Call ................................................................... 21
4.1.2 Contacts ...................................................................... 22
4.1.3 Messaging ................................................................... 23
4.2 GPS .................................................................................. 24
4.3 Bluetooth ............................................................................... 26
Chapter 5 ........................................................................................ 27
5.1 PING ...................................................................................... 27
5.2 Volume Settings ..................................................................... 28
V600 User Manual
3
5.3 Sensor ................................................................................... 29
5.4 Keyboard ............................................................................... 30
5.5 Network ................................................................................. 31
V600 User Manual
4
Statement
2013 by ShenZhen Chainway Information Technology Co., Ltd. All
rights reserved.
No part of this publication may be reproduced or used in any form, or
by any electrical or mechanical means, without permission written
from Chainway. This includes electronic or mechanical means, such
as photocopying, recording, or information storage and retrieval
systems. The material in this manual is subject to change without
notice.
The software is provided strictly on an “as is” basis. All software,
including firmware, furnished to the user is on a licensed basis.
Chainway grants to the user a non-transferable and non-exclusive
license to use each software or firmware program delivered
hereunder (licensed program). Except as noted below, such license
may not be assigned, sublicensed, or otherwise transferred by the
user without prior written consent of Chainway. No right to copy a
licensed program in whole or in part is granted, except as permitted
under copyright law. The user shall not modify, merge, or incorporate
any form or portion of a licensed program with other program material,
create a derivative work from a licensed program, or use a licensed
program in a network without written permission from Chainway.
Chainway reserves the right to make changes to any software or
product to improve reliability, function, or design.
Chainway does not assume any product liability arising out of, or in
connection with, the application or use of any product, circuit, or
application described herein.
No license is granted, either expressly or by implication, estoppel, or
otherwise under any Chainway intellectual property rights. An implied
license only exists for equipment, circuits, and subsystems contained
in Chainway products.
V600 User Manual
5
V600 User Manual
6
Chapter 1 Introduction
Chainway V600 is a fixed vehicle computer with superior and reliable
performance. Featuring 4G LTE network, 2.4G & 5G dual-band Wi-Fi,
ultrafast Quadcore processor, GPS & BDS, two-channel external
camera,5MP autofocus camera, fingerprint and face recognition,
OBD data collection, Bluetooth 4.0 as well as biometrics, supporting
calls, SMS, voice and recording functions, it can fully realize the
overall management of driving school vehicles, school buses, taxis,
buses, trucks etc, effectively ensuring traffic safety.
V600 User Manual
7
Chapter 2 Installation
2.1 Extrinsic feature
V600 Extrinsic feature and interface are showed as below:
Front:
V600 User Manual
8
Back：
Top：
V600 User Manual
9
Right:
V600 User Manual
10
2.2 SIM card and Micro SD card installation
Refer to top picture in 2.1, SIM card and Micro SD card slot is on the
right side above. SIM card slot needs to be opened by niddle.
2.3 Power connection
Refer to right picture in section 2.1, connect one end to V600 device,
the other end to vehicle to supply power.
Attention: Under development stage, the power cable can be
connected to the DC adapter to supply power, please pay attention to
VCC and GND connection difference via the sign on the cable.
V600 User Manual
11
2.4 Power Button
Refer to right picture 2.1, long press the power button for 3s to power
on and off the device. Short press the power button to get the device
into and out of sleep mode.
V600 User Manual
12
Chapter 3 Data Acquisition
V600 is able to gain its high data acquisition ability through RFID,
fingerprint and camera：
•
Data acquisition, identification and validation for passengers
and drivers can be collected with fingerprint and IC card.
•
Face recognition can be established by related software.
•
Used in data acquisition for driving school vehicles, school
buses, taxis, buses, trucks etc.
3.1 RFID
V600 equip with optional NXP HF module, it supports ISO14443A/B
protocol.
3.1.1 14443A
1. Open App Center. The test demos are showed as below:
V600 User Manual
13
2. Press “14443A”，and press “scan” to start scanning.
3. The function supports M1 and ULTRA LIGHT read and write.
V600 User Manual
14
3.1.2 14443B
In Appcenter to open “14443B” function and UID infor can be
scanned.
V600 User Manual
15
3.2 Fingerprint
1. Open the Fingerprint Demo in Appcenter.
2. Put the finger to the fingerprint module and set the ID/name of
the template under “ACQUISITION”.
3. Put the finger to the fingerprint module properly and identify by
ID/Name/Score under “IDENTIFICATION”.
4. The local templates can also be checked under “Data”.
V600 User Manual
16
3.3 Camera
3.3.1 Front Camera
Click icon “Camera” in the home page and test the front camera
function:
V600 User Manual
17
3.3.2 External Camera (optional)
Connect the external camera to the extension cable to get external
camera running, refer to picture below：
V600 User Manual
18
Demo and test:
1. Open OTG function in App center first.
V600 User Manual
19
2. Enter “Mainactivity” to and test the external camera function:
V600 User Manual
20
3.4 OBD
OBD with below functions:
•
Accurately record the location, speed and fuel consumption,
and trigger real time alarm.
•
It helps analyze driving behaviors and give pertinent
suggestions, saving traffic overheads.
•
Professional vehicle fault diagnosis is realized to ensure
road safety and prolong life span.
Connect OBD connector to vehicle, refer to picture below：
V600 User Manual
21
Chapter 4 Network Communication
Whether indoors or outdoors, V600 provides enterprises with
anywhere, anytime real-time connectivity by Bluetooth, fast 4G LTE
network and 2.4G & 5G Wi-Fi.
4.1 Phone
4.1.1 Phone Call
1. Click this icon.
2. Click the number button to input the numbers.
3. Click the button to confirm and dial.
4. Click the to end the calling.
V600 User Manual
22
4.1.2 Contacts
1. Click “Contacts” to open the contacts list.
2. Click icon to add the new contact.
3. Click icon to import/export or delete the contact list.
V600 User Manual
23
4.1.3 Messaging
1. Click icon to open the message list.
2. Click icon to input the content.
3. Click icon to send the message.
4. Click icon to add photos, videos.
V600 User Manual
24
4.2 GPS
1. Open the GPS demo in App center and turn on GPS module.
2. Set the GPS parameters and get the GPS data information.
V600 User Manual
25
V600 User Manual
26
4.3 Bluetooth
1. Open the Bluetooth demo in App center and turn on the
Bluetooth.
2. Input the content or select the file, then scan the nearby
Bluetooth printer and pair them.
3. Select the printer and click “Print” to print.
V600 User Manual
27
Chapter 5
5.1 PING
1. Open the Ping in App center.
2. Set the Ping parameters and select the internal/external addresses.
V600 User Manual
28
5.2 Volume Settings
1. Open the Volume Setting demo in Appcenter.
2. Set the volumes based on the requirements.
V600 User Manual
29
5.3 Sensor
1. Open the Sensor demo in App center.
2. Test the sensor based on the requirements.
V600 User Manual
30
5.4 Keyboard
1. Open the Keyboard demo in Appcenter.
2. Set and test the key values of the device.
V600 User Manual
31
5.5 Network
1. Open the Network demo in Appcenter.
2. Test the WIFI/Mobile signal based on the requirements.
Loading...