Shenzhen Bondidea Technology BD9588G Use Manual

REVA0 BD9588G USER MANUAL Page 1 /5
Shenzhen Bondidea Technology
Model BD9588G Specification 2.4G Wireless Mouse Describe 3D Optical Mouse
Approved Checked Made:
USE MANUAL
REVA0 BD9588G USER MANUAL Page 2 /5
Shenzhen Bondidea Technology
Product Appearance and key function definition
Product Features
1Adopt 2.4G bidirectional transmit technology34 channelssuper anti-interference; 2Adopt high resolution, accurate position; 3Super ability for replacement, use up freewheeling; 4Strong dormancy power-saving design and can achieve economize electricity at level 3 .When it under deep
sleep mode the electric current will less than 100uA; LED light will out of work and that access super save electricity mode within 10 min ,when it no use ,and it can fall into deep sleep mode automatic;
(now the mouse almost no longer power consumption, press any key immediate wake up. )
5Ensure you of working 360 degrees freely and say goodbye to wire; 6No need code intelligence connection technology; 7Ergonomic design for appearanceclose to palmuse freely and can not tire. 8The baking finish and flame plating technology of appearance are very fashionWear-resisting prevent
slippery.
9Nano receiver, built-in mouse, very convenient; 10Power on-off design, turn off the mouse power, it can prolong batteries life when no use; 11Working voltage: 1.5V (AA) 12Main size: 98*54*27mm
Middle Button and Scroll Wheel
Right Button
Left Button DPI Key
BD9588G
Receiver
REVA0 BD9588G USER MANUAL Page 3 /5
Shenzhen Bondidea Technology
System Compatibility
1Suitable Model: IBM PC/AT Compatible, Power Macintosh 2Operation Systems: Windows 2000/XP/Vista/WIN7/MAC 3Interface: USB
Technical Parameters
Mouse:
1. Rating working voltage 1.5V 2. Rating working current 10mA 3. Maximum acceleration 3 0 i p s
4Resolution 800-1200-1600DPI 5
Wireless working channels 34 auto frequencies
6. Working frequency 2.408-2.474GHz
7Working distance >10meters
Receiver:
1. Rating working voltage 5V
2Rating working current 30mA
Pull out the receive and the battery installation steps
1Open the mouse at the bottom of the battery cover. 2Take out the 1 AA alkaline battery from the package. 3Put the batteries into the battery cell according to the right pole . (Please don’t install in the opposite pole , or it will harm 4Pull the battery cover into the mouse and take out receive.
Receiver
Open th e battery
cover a ccording to
arrows
Power switch
REVA0 BD9588G USER MANUAL Page 4 /5
Shenzhen Bondidea Technology
Install the receiver and connect the Parameters
1Pull out the receiver from the bottom of the mouse . As picture three shows: 2Pull "ON" to the mouse power switch .As picture four shows. After computer automatic identification and mouse can use.
DPI switch function
1DPI default is 1200DPI 2DPI key can switch between 800-1200-1600 DPI.
Nano Receiver
DPI indicator place
REVA0 BD9588G USER MANUAL Page 5 /5
Shenzhen Bondidea Technology
Attention
1.It can prolong the batteries life if you use the mouse on the white surface.
2. Auto-sleeping and power-saving f unction, it will be auto-sleeping without operation w ithin a long time, press any key or
scroll wheel to activate it.
3. Optical may not normal use in smooth desktop , glass , reflective , dark black and 3D mouse pad .。
4. Please turn off the power if you‘re in traveling or you’ll not use it for a long time.
5. When mouse work on metallic surface, the best way is to place a mouse pad under mouse or lay the receiver horizontally to
achieve the optimal receiving effect.
6. No need to connect data again when replace battery (built-in memory function.) .
Technical Instructions
Adopt 2.4G Hz wireless h igh freq uency te chnology, s atisfying Europe R&TTE Direct ive1999/5/EC re quirement, its
radiation w ill not harmful for men’s body (m uch less tha n mobile radia tion), w ireless em ission w ill oc cur elec tromagnetic
signal, please be caution to use when in the using heart pacemaker or related to body assistant instrument surroundings
Disclaimer
We made every effort to ensure that the information and procedure in this guide is accurate and complete, no liability
can be accepted for any errors or omissions and reserves the right to make any changes without further notices to any products
herein.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined b y turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.
Loading...