ADJUST THE SPEED OF THE ROTOR BLADES BY THE PCB BOARD
02
03
03
05
06
07
07
08
08
★SWASHPLATE ADJUSTMENT
★MAIN ROTOR BLADE ADJUSTMENT
★GROUND EFFECT
★NORMAL FLIGHT
★INSTALLATION
★PARTS REPLACING
★THE POSSIBLE PROBLEMS AND SOLUTIONS
★SPARE PARTS LIST
★中文说明部分
09
09
09
10
11
13
14
15
17-31
1
www.art-tech.com
Thank you for purchasing our latest product--Angle 300 electric R/C helicopter. This helicopter is a
typical coaxial dual rotor helicopter and it’s our latest product. The frame is made of the high-strength
plastic and configured with scale flashers for night flight. This helicopter is super stable, easy to control and
it has a great maneuverability and accuracy. Moreover, this product has a vivid flying gesture and it is crashresistant. The flying time of each charge is more than 10min and it is an optimal model for the beginners. For
the safety operation of this helicopter, please make sure to read this manual carefully and follow all of the
safety notes strictly.
※This picture only for reference.
SPECIFICATIONS:
Rotor diameter : 350mm
★
★
Length: 430mm
★
Height: 190mm
★
Weight: 260g
CONFIGURATION:
4channel 2.4GHz radio system
★
180 class brushed motor
★
Li-Poly battery: 7.4V 1000mAh
★
★
2 pcs 8g servo
★
4 pcs blades
WARNING:
This product is for the ones that are above 14 years old.
Children should be supervised prior to starting or flying this helicopter.
Don’t touch the propellers after the product turned on.
Opt imal hel icop ter f o r th e be gin n er
★
★
Flying condition: indoor without wind
★
Coaxial counter-rotating structure
★
Easy control and stable flight
★
4 channel 2.4GHz radio system
★
Balance charger
★
Flying time: 10 mins
PRODUCT CHARACTER
Accomplishment
Difficulty of assembly
Difficulty of m ai nt ai n
Difficulty of c on tr ol
Anti-shatter
100%
★☆☆☆☆
★★★★☆
☆
★★☆☆☆
★
★★☆ ☆
※Specifications may change without notice, please refer to the real one for configuration. 2009.06
2
www.art-tech.com
CAUTION
R/C modeling is a hobby with high technology and should not be consid er ed as a toy. Ther e is ri sk
in vo lv ed during the o peration of t hi s product and t he u ser should take all precautions seriously or serious
body injury may occur, it is o nl y suitbale for the pe rs on a bove 14 years old .
Improper disassembly, improper adjustments or setup may lead to unsatisfactory or unsafe
operation. If you have any questions regarding the use, maintenance, or safe operation of this model,
please contact your local retailer.
NOTE
As with any R/C product there are risks involved when flying this model. A beginner should seek the
help of a skilled R/C pilot to ensure that the model is airworthy and capable of safe operation. Any
damage, neglect, or unfamiliar use of this product can cause unexpected accidents or injury. Please
ma ke s ure the f ly ing is sa fe a nd we are not r esponsi ble for any accident.
TIPS FOR SAFETY
1. Locate an appropriate place to fly your helicopter:
R/C helicopters are capable of flying at high speeds, thus posing a certain degree of potential
danger to both the flyer and bystanders, so it is important to choose a right site for flying. First, the
space of flying site should be big enough (at least 4*4*4m). Second, the flying site should be open
enough, and clear of obstacles. Do not fly your helicopter during the strong counter-flow weather
to avoid the unnecessary damage.
This RC helicopter, angel 300, have the best performance in terms of control capability and
scalability without wind. it may not fly properly outside due to the fluency of airflow so that it is not
recommenced to fly outdoor.
With out wind
3
www.art-tech.com
TIPS FOR SAFETY
2. Obtain the assistance of an experienced pilot.
The help of an experienced pilot will ensure that you will have
a well trimmed, correctly functioning helicopter for the first flight.
It is strongly advised that you first practice on the simulator prior
to ma k i ng a flig h t w ith yo u r n ew heli c o pter.
Novice
3. Always be away from the running parts
During the operation of your helicopter the rotor will be
spinning at a high rate of speed. Don’t touch any running parts and
please keep a proper distance with them. Be conscious of your
actions and be careful to keep your hands, face, eyes, and loose
clothing away from the blades and gears to avoid being hurt or any
damage to the model.
4. Keep your helicopter away from humidity.
Your new Angle 300 helicopter is a hi-tech electronic device, so
try to keep the model away from the humidity condition which may
result in the operation errors or some other unrespectable faults to
the model.
Never subject your model to severe weather, such as raining,
thunder.
Novice
Expert
5. Operate your helicopter gently
The helicopter will give a prompt response to the controlling
action,so try to operate the helicopter gently. Try to avoid the
excessive operation as this may lead to the helicopter to be out of
control.
4
www.art-tech.com
CHARGE MODE AND WARNING
Li-Po battery(balance changer)
ATI-0910 Li-poly battery balance charger using instruction
Specifications:
Input voltage: DC 10V~15V
Output voltage: DC 7.4V&11.1V (To 2 or 3 cell Li-poly battery)
Charge current: 0.3A~1.0A (Can be continuously adjusted)
Indicator state:
Green: Charge complete or no battery
Red: Charging
Flash: Drip current charging
Separated battery detection: The voltage of any battery reaches
4.2V, the charge of it will cease automatically.
Using method:
1. Connect the cigarette with charger per above image
2. Then plug cigarette into its socket in car (Adapter should be connected if charge at home: connect the adapter
to home power socket, then plug the adapter’s DC end to charger). The LED will turn green indicating it is ready
for charging.
3. Connect the battery to the charger per its interface mark. The LED becomes red, which means the battery is
on the way.
4. Adjust the charge current. In order to prolong battery’s life-span, we recommend charging them under low
current if you have enough time.
5. When the LED flashing, the charger will enter the stage of drip current charging. The LED turns green when
fully charged, and the battery will be used at any time.
12V DC Power supplier
Notice
1. Do not insert any conductive into the cooling hole when power is on, or damage will be caused to the charger.
2. While charging is in process, please do not place it near flammable materials.
3. It is not allowed to charge two-cell and three-cell Li poly battery at the same time.
4. Expect Li poly battery, this charger is not allowed for other kinds of battery.
5. While charging, please keep it out of the reach of Children.
6. When this charger is in use, please do not go away and leave it unwatched, if any abnormality occurs (such as the
power indicator is off, the temperature of the battery rise rapidly, etc.) stop charging immediately.
7. Please do not use power with output voltage higher than 15V.
8. Please do not disassemble the charger or its accessories.
9. When the battery is not cool down, please do not urge to charge it.
5
www.art-tech.com
Loading...
+ 12 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.