ShenZhen Aoni Electronic Industry HEADSET001 User Manual

Bluetooth Headphone Manual

Thank you for purchasing the stereo Headphone with Bluetooth Wireless technology; we encourage you to read this quick
installation guide thoroughly to get the most of this innovative wireless headphone.

1. Package content:

Headphone; USB cable charger; User manual.

2. Button function:

1. Volume up

2. Next Track

3. Volume down

4. Previous track

5. Play/Pause

6. Power on/off

3. LED Status indicator

Blue LED flashes very fast indicates the device is powered on and/or connected

·

·Solid red LED indicates the battery is charging. When the battery has reached full capacity, the solid red LED will go off.

4. Charge your headphone

·

Use the supplied USB cable to charge the battery directly from your PC.

·Make sure that your headphone is fully charged before using it for the first time.

·The headphone battery has to be initially charged for at least for 4 hours. Thereafter, the battery will take from 3 to 4 hours

to recharge.

5. Advanced operation

Note: Before installing this product, please make sure your laptop has the built-in Bluetooth feature available. If your laptop
is not bluetooth-enabled, you must purchase a bluetooth dongle, preferably version 2 . 1 or above.

a. Pairing the headphones with your laptop

2. Activate the bluetooth program in your laptop to begin setup.

3. The “Search new device” screen will be displayed.

4. Place both devices not more than one meter away from each other.

5. Press the power button on the headphone to turn it on. The blue LED will start blinking per second. This indicates that the
headphone has entered pairing mode.

5. You will find the product name “ANS 872” occurs on your laptop, press “pairing”.

6. If the pairing is successful, the blue LED will stay lit.

b. Pairing the headphone with your phone

1. Make sure the headphone is off.

2. Set your bluetooth phone to “discover” the wireless headphone.

3. Place both devices not more than one meter away from each other.

4. Press the power button on the headphone to turn it on. The blue LED will start blin king per second. Press Play/pause
button for about 2 seconds, you will hear “ready to pair”, this indicates that the headphone has entered pairing mode.

5. You will find the product name “ANS 872” occurs on your phone, press “pairing”.

6. If the pairing is successful, the blue LED will stay lit.

Please note: If your laptop/phone device is under version 2.1, please enter the passkey =”0000”(4 zero).

6. Answering and ending a call using your mobile phone

When there is an incoming call, the headphone will ring.

·

· Briefly press the power button to answer an incoming call. Music playback pauses temporarily.

·To end a call simply tap the power button once again. As soon as you hang up, music playback resumes automatically.

7. Specifications:

Mic. Spec.:

Microphone Unit: ￠6*5mm
Directivity: omnidirectional

S.P.L:

-53±3dB

Impedance: ≤2.2KΩ

Frequency response:

Operating Voltage:

Speaker Spec.:

Speaker diameter:￠40mm
Impedance:32Ω
S.P.L: 114±3dB S.P.L at 1KHZ
Rated power: 20mW
Aggregate capability: 40mW
Frequency response: 20Hz-20,000Hz

Power:

Battery type: Built-in 360mAh Lithium-polymer rechargeable battery
Charging connector type: Micro USB 5V/1A
Run time: Up to 10 hours of talking or music playback time
Standby time: 90 hours
Charging time: 3-4 hours

20Hz-10,000Hz

4.5