ShenZhen Aoni Electronic Industry E977 Users Manual
Quick Start Guide
Smart Wireless Bullet Camera
Welcome
Thank you for choosing our smart camera.
Getting started is easy.
Product Details
Router
2
Take out the whole module carefully and find the SD
card slot, insert this SD card and restore it.
Micro SD card slot
折后封面→
Model: E977
What’s Included
Security Camera
x1
Power Adapter
Smart Wireless Bullet Camera
Quick Start Guide
Wall Mount Screw Sets
Antenna
x4
Alignment Sticker
Tight Line
Waterproof Kit
Antenna
Microphone
Lens
Light sensor
Infrared lights
1. Connection Preparation
Bring the camera and phone within 1 to 3 feet (30 to
100 centimeters) of the router.
Camera
Note: Make sure smart phone is connected with your
wireless router.
Please note the camera is only working under 2.4G
Wi-Fi, not support 5G Wi-Fi.
30cm~100cm
Smartphone
2. Get the APP and Account
For the best experience, please download the
"Tuya Smart" APP to your smartphone from App Store
or Google Play, or you can also scan the QR code below,
the APP icon will be displayed after installed successfully.
Tuya Smart
Tuya Smart
3. Insert the Micro SD card
As the SD card slot is built-in, so we suggest customers to
insert it in factory during assembling. If you need to insert
it by yourself, please follow the following instructions.
1
Open the in front black glass and unscrew these screws.
Unscrew these screws
4. Connect the power to the camera
Connect the power to the camera by DC12V/1A Power
Adapter.
Reset Button RJ45 Port
DC
5. Set up your camera
1
Press the Reset button from the tight line cable for above
5 seconds, then release the button to start Reset
processing.
2
Launch the app from your smartphone and click the
Sign Up button. Follow the on-screen instructions.
3
Click "Add Device" or "+" on the right corner to add
device; Then click" Security&Sensor" to select" Smart
Camera"；
4
Click the button to confirm if the indicator is red and
blinking quickly, then input the correct working wifi
password to proceed;
5
Point the QR code to the camera lens for 15-20cm ;
When the indicator turns to blue and blink quickly,
click for next step. If failed, please reset and go
back to start again
6. Place or Mount Your Camera
You can place your camera on a shelf or other flat
surface, or you can mount it to the wall.
To mount your camera to the wall:
Fasten the mounting screw into the wall, and then
mount the camera from the screw.
If you’re mounting the camera to drywall, be sure the
plastic drywall anchors that are provided.
Mounting on Wall
Mounting on Ceiling
You’re done!
Congratulations! Your camera is set up and ready to go.
All trademarks are used for reference purposes only.
Thanks again for choosing our smart camera! Make
life safe in your hands!
Boost security mobility in your smartphone!
FCC STATEMENT :
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved
by the party responsible for compliance could void the
user's authority to operate the equipment.
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference
in a residential installation. This equipment generates uses
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV
technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits
set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance
20cm between the radiator & your body.
尺寸：77*120mm（折叠尺寸）
要求
位 数
x / x . x
尺 寸 公 差
尺 寸
±1mm
角 度
±1°
±1°
128g铜版纸，
单黑色两面印刷，
RoHS
品名
料号
版 本
FORMAT
云摄像头 E977 说明书
40610E9770004
A
设 计
DESIGNED
制 图
DRAWN
比例
杨炎月
1 : 1
日 期
DATE
审 核
CHECKED
批 准
APPROVED
2019.05.07
记 事
变更NO.
深圳奥尼电子股份有限公司
SHENZHEN AONI ELECTRONIC CO., LTD
年/月/日
Loading...