ShenZhen Aoni Electronic Industry B006 User Manual

User Manual

B006

Microphone unit:

Ф4*1.5mm

Directivity:

omnidirectional

S.P.L:

-42dB ± 3dB

Impedance:

2.2KΩ

Frequency response:

100Hz-10KHz

Charge
cable

Small ear
cups

Large ear
cups

Congratulations, and thank you for choosing the sport bluetooth stereo earphone. This manual
will help you operate the sport bluetooth stereo earphone, but you should first familiarize yourself with
the bluetooth functionality of your mobile phone or other devices before using the sport bluetooth
stereo earphone safety rules.

1. Please follow the rules depicted in this manual closely to ensure your safety. Before using this

sport bluetooth stereo earphone; we would strongly encourage you to read through this user
manual.

2. Be more wary of any edges, uneven surfaces, metal parts, accessories and its packaging so as to

prevent any possible injury or damage.

3. Do not modify, repair or dismantle this bluetooth stereo earphone. Doing so may result in fires,

electric shocks, complete breakdown of this sport bluetooth stereo earphone .etc. All of which, are
not covered under warranty.

4. Do not use any diluents or volatile liquid to clean the sport bluetooth stereo earphone.

5. DO not use the sport bluetooth stereo earphone in a hazardous location.

Accessories List

1. 2 X small size ear cups

2. 2 X large size ear cups

3. 1 X charge cable

4. 1 X user manaul

Technical specification
1、The microphone parameters

Operating voltage:

2.2V

Speaker diameter:

10mmØ

Impedance:

16Ω

S.P.L:

83dB ± 3dB

Rated power:

Frequency response:

Bluetooth version：

4.1

Radio-frequency region:

7m outdoor, 15m indoor

Li-battery capability ：

60*2 mAh

Standby time:

5000hrs

Talking time

6hours

Playing time

6hours

Charging time

1.5hours

Charger mode

Micro USB 5V/A

Status

LED indicator

Low battery

Red LED fast flashes three times per 2S ,
warning interval per 1 minute.

Charging

The red light solid on.

Fully charged

The red indicator will go out .

Microphone

Ear cup
Ear support

LED indicator
light

MFB
button

V+ button

V- button

2、The speaker parameters

3. The Li- battery parameters

1.04mW
2402-2480 MHz

Charging the battery

When using the unit for the fully charge the battery for about 1.5 hours before using the battery for the
first time.

1. Connect the USB charging cable to the earphones.

2. Next, connect the other end of the USB charging cable to a powered USB device.

Earphone indicator