Page 1
Product Illustration：
Wi-Fi smart socket
User Manual
Button： Push and hold 5 seconds to enter network configuration mode
Indicator：
Blue LED - Network status indicator.
Blue LED OFF - Offline,
Blue LED Blinking - In networking configuration mode
Blue LED ON - Network connected.
Red LED - Power status indicator.
Red LED On - Power ON
Red LED OFF - Power OFF
Quick start
Search
scan the QR code below to download.
Smart Life
in App Store or Google Play and download the APP. Or
1
Page 2
Step 1: Registration and login "smart life" APP.
If you don't have the account of “Smart life” APP,register an account or sign in with
cellphone number + verification code. This page describes the Registration process.
1.Tap“Register”in the upper right（pic 1）
2.The system automatically determines your country / area.You can also select your
country code by yourself. Enter the cellphone number/E-mail and tap “Next” （pic
2）
3.If you enter the mobile cellphone number，enter the verification code in the
message（pic 3），and enter the password，tap"Confirm" to finish your
registration.
4.If you enter the E-mail，enter the password （pic 4），tap ” Confirm" to finish
your registration.
Make sure your phone is connected to WiFi in your home. Click "+" in the upper right
corner of the homepage and select "Electrical outlet" from the device type.
2
Page 3
Step 2: Connect with the power supply, long press the power button more than 5
seconds until the blue indicator enters into the fast flash mode. Select confirm
indicator rapidly blinks.
Step 3: Enter your WiFi password for your phone and click "Confirm" to enter the
page of the search device.
Step 4: Enter the device page, then complete the configuration
3
Page 4
How to use Amazon Echo to control your Smart devices?
Step 1: Open the” Amazon Alexa APP, then find the “Skills “button on the menu.
Press it.
4
Page 5
Step 2: Search the” Smart life” and choose the first one, then Enable it.
Step 3: Select your country code and Enter your “Smart life” APP Account and
Password, then press the “Link Now” button. When the Account success to login
press the “Done” button.
5
Page 6
Step 4: Back to the menu, and press the “Smart home” button, then choose the
“Devices”, then press the ”Discover” button.
Step 5: Now you can use your Alexa to control your Smart devices, enjoy yourself.
6
Page 7
Specification：
Maximum current: 10A
Rated voltage: 110-240V
Rated power: 1100W
Input voltage: 110-240V
Wireless Type: Wi-Fi 2.4GHz
Operating temperature: -20 ℃ - 70 ℃
Support system: Android and iOS
7
Page 8
Warning Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by
manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
To comply with FCC RF exposure compliance requirements, this grant is applicable to
only mobile configurations. The antennas used for this transmitter must be installed
to provide a separation distance of at least 20 cm from all persons and must not be
co-located or operating in conjunction with any other antenna or transmitter.
8
Loading...