ShenZhen F 6088 User Manual

Shen Zhen Shi Xin Zhong Xin Technology Co., Ltd.

--------------------------------------------------------------------------------------------------------------------------------------------

F-6088

Bluetooth Module F-6088 User Manual

Product Overview

F-6088 is an intelligent wireless audio data transmission product which developed by our company
independently; it is a wireless stereo transmission scheme with low cost and high efficiency. And the

module used the BEKEN chip, which provide the high quality sound and compatibility for the
module, and make the overall performance more optimization. BK3231 Bluetooth Module use the

drive-free mode, users only need to access to application products, electrify it and connect the button,
then they can quick transmit the music wirelessly and enjoy the fun of music.

Application:

It is mainly used for short distance transmission, convenient to connect with notebook, mobile phone,

PDA and other digital Bluetooth devices. Then realize the wireless transmission for music.

0 Bluetooth Speaker
0 Bluetooth Stereo Headset
0 Speaker Phones
0 Bluetooth Wireless Transmission Audio

. Basic Performance

Bluetooth Profiles
0 Bluetooth v2.1 specification support

0 A2DPv1.2
0 AVRCPv1.0
0 HFPv1.5

. Performance parameters:

Model

Bluetooth standard

F-6088

Bluetooth V2.1

Working current

Support Bluetooth Profile

Working current

Standby Current

Temperature Range

Wireless Transmission Range

Transmission Power

Sensitivity

Frequency Range

External Interface

Audio performance

Audio S/R

Module Size

Company SHENZHENSHIXINZHONGXIN TECHNOLOGY CO., LTD.

TEL [phone]. FAX: [phone]

Address: Block 3, Dong Huan Industrial Park, Sha Jing Town, Bao’an District, Shenzhen City, Guangdong, Province, China

Web: www.c-chip.com.cn

2.8-3.6V

HFPV1.5, A2DPV1.2,AVRCPV1.0

≤40mA

<500uA

-40ºC to +85ºC

>10 M

Support CLASS1 10 dBm

-88dBm<0.1%BER

2.4GHz-2.480GHz

I2C, SPI and UART interface

Support AAC, MP3, SBC, APTX,STEREO

≥75dB

25X13.5X1.8MM

Shen Zhen Shi Xin Zhong Xin Technology Co., Ltd.

F-6088

--------------------------------------------------------------------------------------------------------------------------------------------

-

Module Size Diagram

Module Pin D efinition Diagram

Shen Zhen Shi Xin Zhong Xin Technology Co., Ltd.

Pin Function

F-6088

Pin
1

2
3
4
5
6
7
8
9
10
11
12
13
14
15
16

Symb
VBAT

SPK_R_N
SPK_R_P
SPK_L_N
SPK_L_P
VMIC
MIC_N
MIC_P
GIO13
GIO12
J_MS
J_CK
J_DO
J_DI
J_RST
GND

I/O
Analogue in

Analogue out
Analogue out
Analogue out
Analogue out
Analogue out
Analogue in
Analogue in
Digital I/O
Digital I/O
Digital I/O
Digital I/O
Digital I/O
Digital I/O
Digital I/O
Ground

Description
Check battery

Right channel audio output negative
Right channel audio output positive
Left channel audio output negative
Left channel audio output positive
Bias for reference for audio(MIC)input
MIC input negative
MIC input positive
GPIO13/MUTE
GPIO12
JTAG pin
JTAG pin
JTAG pin
JTAG pin
JTAG pin

Ground connect battery negative
17
18
19
20

21
22
23
24
25
26
27

28
29
30
31
32

GND1
GIO11
PIO10
GIO9

GIO8
GIO7
GIO6
3V3_A
3V3_B
GIO5
GIO4

LED1
LED2
GIO0
GIO1
ANT

Ground
Digital I/O
Digital I/O
Digital I/O

Digital I/O
Digital I/O
Digital I/O
FLASH power supply
Power supply pin
Digital I/O
Digital I/O

Digital I/O
Digital I/O
Digital I/O
Digital I/O
Bi-directional with weak

Ground connect battery negative

GPIO11

GPIO10

GPIO9/TX

GPIO8/RX

GPIO7

GPIO6

FLASH chip power supply

Whole chip power supply

GPIO5/NEXT

GPIO4/PRE

GPIO3/VOL+

GPIO2/VOL-

GPIO0/LED1

GPIO1/LED0

Programmable input/output

Shen Zhen Shi Xin Zhong Xin Technology Co., Ltd.

Attention for connect the circuit

F-6088

When BK3231 connect external amplifiers, it must connect differential input amplifier. If not, the module

must connect an op-amp to balance two difference levels; otherwise, it will appear the "snapped" impact

sound.

Statement:

A Wireless Bluetooth use environment: the wireless signal is widely influenced by the surrounding environment.

Such as the trees and metal can absorb certain wireless signal. Therefore, the transmission distance has been influenced in

the application.

B The Bluetooth Modules are supporting the existing system, placed in the shell. However, the metal

shell can shield the wireless frequency signal. We suggest not to equip-ed it in a metal shell.

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operation is subject to the following
two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference
that may cause undesired operation of the device.

NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or changes to
this equipment. Such modifications or changes could void the user’s authority to operate the equipment.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible
d'en compromettre le fonctionnement.

This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

This equipment is portable device. The output power of this device is less than 20mW.The SAR test is not required.

A certified modular has the option to use a permanently affixed label, or an electronic label. For a permanently affixed label, the module
must be labelled with an FCC ID: KKI-F-6088. The OEM manual must provide clear instructions explaining to the OEM the labelling
requirements, options and OEM user manual instructions that are required

For a host using a this FCC certified modular with a standard fixed label, if (1) the module’s FCC ID is notvisible when installed in the
host, or (2) if the host is marketed so that end users do not have straightforward commonly used methods for access to remove the module
so that the FCC ID of the module is visible; then an additional permanent label referring to the enclosed module:
“Contains Transmitter Module FCC ID: KKI-F-6088” or “Contains FCC ID: KKI-F-6088” must be used. The host OEM user manual
must also contain clear instructions on how end users can find and/or access the module and the FCC ID.

Host product is required to comply with all applicable FCC equipment authorizations regulations, requirements and equipment functions
not associated with the transmitter module portion. compliance must be demonstrated to regulations for other transmitter components
within the host product; to requirements for unintentional radiators (Part 15B). To ensure compliance with all non-transmitter functions
the host manufacturer is responsible for ensuring compliance with the module(s) installed and fully operational. If a host was previously
authorized as an unintentional radiator under the Declaration of Conformity procedure without a transmitter certified module and a
module is added, the host manufacturer is responsible for ensuring that the after the module is installed and operational the host continues

to be compliant with the Part 15B unintentional radiator requirements. Since this may depend on the details of how the module is
integrated with the host, we suggest the host device to recertify part 15B to ensure complete compliance with FCC requirement: Part 2
Subpart J Equipment Authorization Procedures , KDB784748 D01 v07, and KDB 997198 about importation of radio frequency devices
into the United States.

Company: SHENZHENSHIXINZHONGXIN TECHNOLOGY CO., LTD.

TEL [phone]. FAX: [phone]

Address: Block 3, Dong Huan Industrial Park, Sha Jing Town, Bao’an District, Shenzhen City, Guangdong, Province, China

Web: www.c-chip.com.cn

Shen Zhen Shi Xin Zhong Xin Technology Co., Ltd .

F-6088

--------------------------------------------------------------------------------------------------------------------------------------------

Circuit Application:

Company: SHENZHENSHIXINZHONGXIN TECHNOLOGY CO., LTD.

TEL [phone]. FAX: [phone]

Address: Block 3, Dong Huan Industrial Park, Sha Jing Town, Bao’an District, Shenzhen City,
Guangdong, Province, China Web: www.c-chip.com.cn