ShenZhen ECAS01 Users manual

ECOCOM Manual

(LED Type) (LCD Type)

Charging

Red LED: Charging
Blue LED: Fully charged

Used only for USB Port charging.

Power On/Off(LED/LCD Type)

Power On : Press and Hold the Phone Button and Jog Dial for 1 sec
Power Off : Tap the Phone Button and Jog Dial for 1 sec

Volume Adjustment(LED/LCD Type)

Up the Jog Dial : Increase the volume
Down the Jog Dial : Decrease the volume

Phone, Music Pairing(LED/LCD Type)

1. Press and Hold the Phone Button for 5 seconds.

2. Search for Bluetooth devices on your mobile phone.

Select the ECOCOM in the list of the devices detected on the mobile phone.

3. Enter 0000 for the PIN. Some mobile phones may not ask for the PIN.

Music Operation(LED/LCD Type)

Play or pause music:Press and Hold the Jog Dial for 1 second.
Track back: Press and Down the Jog Dial.
Track forward: Press and Up the Jog Dial.

Mobile Phone Call Making and Answering(LED/LCD Type)

Answering/Ending a call: Tap the Phone Button
Rejecting a call: Press and Hold the Jog Dial for 2 seconds.

Intercom Pairing(LED/LCD Type)

1. Press and hold the Jog Dial of two headsets for 5 seconds.

2. Simply tap the Jog Dial of any one of the two headsets.

Intercom Start/End(LED/LCD Type)

1st Friend: Tap the Phone Button once.
2nd Friend: Tap the Phone Button twice.
3rd Friend: Tap the Phone Button triple times

Radio Seek Stations(LED/LCD Type)

Seek up stations: Press and Up the Jog Dial.

Seek down stations: Press and Down the Jog Dial.

Troubleshooting(LED/LCD Type)

Factory Reset

If you want to restore the ECOCOM to factory default settings, use the Factory Reset.
Press and Hold the Phone Button for 12 seconds, and tap the Jog Dial.

Safety Precautions

Please ensure that the product is properly used by observing the warnings and cautions below to prevent any risk
and/or damage to property.

Product Storage and Management

• Keep the product free of dust. It may damage mechanical and electronic parts of the product.

• Do not store the product in high temperatures as this may reduce the life span of electronic devices, damage the
battery, and/or melt plastic parts of the product.

• Excessive heat (e.g. ex haust heat) can cause damage t o t h e dec or ati on, t he inner shell of the helme t and the interior
lining.

• Do not store the produ ct in cold te mperatures. A brupt chan ges in te mperature s may cause condensatio n and damag e
electronic circuits.

• Do not clean the product with cleaning solvents, tox ic chemicals, or str ong detergents as thi s may damage the product.

• Direct contact with motor fuel, thinners or solvents can destroy the structure of the inner and outer shell. Make sure
the helmet does not come into contact with such substances, even for cleaning purposes.

• Do not paint the product. Paint may obstruct moving parts or interfere with the norm al op eratio n of the produ ct.

• Do not drop or otherwise shock the product. It may damage the product or its internal electronic circuits.

• Do not disassemble, repair or modify th e produ ct as thi s may damage the pro duct and invalidate the product warranty.

• Do not store the product in humid environments, especially for long time storage.

• The helmet should be replaced after 5 to 7 years, depending on use and care. Although the outer shell is in principle
capable of a longer serv ice lif e, the occ urrence of material f atigue a nd w ear to o ther co mpon ents, as w ell as the ov erall
action of the helmet and the unknown conditions in which the helmet has been used, make it advisable for your own
safety to replace the helmet after this period of use.

• Original components (in particular on the outer shell, inner shell and re straint system) sho uld not be altered or r emoved.
The fitting of additional parts from other manufacturers that have not been recommended can reduce the protective
effect and renders the DOT certification and all warranty and insurance claims invalid.

• Use only original parts, replacement parts and accessories that Sena has expressly approved for your helmet.

Product Use

• Motorcycling is asso ciated wit h parti cular r is ks an d dang ers for t he rider a nd pa ssenger . T hese risk s and danger s can
be reduced, but not eliminated completely, by wearing a helmet. It is impossible to state precisely what the protective
effect of a helmet will be in the event of an a ccident . Safe r idin g techniq ues, ad apte d to the particular road and w eather
conditions, are essential for your safety.

• To provide adequate protection, the helmet must fit well and be securely fastened.

• Always fasten the chinstrap before setting off and check that the fastening system and strap are correctly in position.

• Never ride with the chinstrap unfastened or incorrectly adjusted. The chinstrap must be correctly
positioned and must not come loose when pulled. The fastener is not correctly closed if the chinstrap becomes loose
when pulled.

• The full protective function of a helmet can no longer be guaranteed after an accident or impact. Like the crumple
zone of a car, the impact energ y of a collis ion is absorb ed by complete or partial de struction o f the struct ure of the ou ter
and/or inner shell of the helme t. Because o f the way helmets are de signed, this damage is r arely visible from the o utside.
The safety helmet is designed to absorb only one impact. It is therefore essential to replace the helmet after a fall,
accident or other violent impact. For safety reasons, the old helmet should be rendered unusable.

• The helmet safety mechanism described above can also cause small cracks in the shell when the helmet is dropped
from a small height (less than 1 meter).

• Any helmet that has been subjected to a violent impact should be replaced.

• No helmet provides absolute protection from all conceivable impacts. This helmet has been specially developed for
motorcycle riding and is unsuitable for other purposes.

• Examine the helmet for damage at regular intervals. Small scratches will not impair the protective function of your
helmet.

• In some regions, it is prohibited by law to ride motorcycles while wearing headsets. Therefore be
certain to comply with all relevant laws in the region before using the product.

• Use of the product at a high volume for a lon g per i od of ti me may damag e y our ear dru ms o r hear ing a bil ity . Keep t h e
volume at a modest level to prevent damage.

• Do not cause impact to the product or touch it with sharp tools as this may damage the product.

• Do not use the product in high-temperatures or apply heat to the product as this may cause damage, explosion, or
fire.

• Keep product away from pets or small children. It may damage the product.

• In any place where wir eless communi cation is pro hibited, su ch as hospitals or airpla nes, turn off the power and refrain
from using the product. In a place where wireless communication is prohibited, electromagnetic waves may cause
hazards or accidents.

• Do not use the product near hazardous explosives. When it is near any explosion hazards, turn off the power and
heed any regulations, instructions, and si gns in the area.

Battery

This product has an irrep laceable re chargea ble battery inside. T herefore, w hen using t he product, m ake sure to adher e
to the following:

• Never separate the battery from the product as this may damage the product.

• The battery performance may be reduced over time with usage.

• In recharging the batt ery, make sure to use an approved charger provided by the man ufacturer. Use of a non -approved
charger may cause fire, explosion, leakage, and other hazards may also reduce the life time or performance of the
battery.

• Any 3rd party USB charger can be used with Sena products if the charger is approved by either the FCC, CE, IC or
other locally approved agencies that Sena accepts.

• Store the battery at temperatures of 15°C~25°C (59°F~77°F). Higher or lower temperatures may
reduce the capacity and life of the battery, or may cause temporary non-operation. Do not use the
product in sub-zero temperature, because it may cause serious reduction of the battery performance.

• If you apply heat to the battery or throw it into a fire, it may explode.

• Do not use the product with a damaged battery. It may explode and/ or cause accidents.

• Never use a damaged charger. It may explode and/or cause accidents.

• Battery life may vary depending on conditions, environmental factors, functions of the product in use, and devices
used with it.

Certification and Safety Approvals