D06
True Wireless Stereo Bluetooth Headset
User Manual
(Binaural calls)
Preface
Thank you for purchasing the D06 True Wireless Stereo Bluetooth Headset.
This manual will help you how to use your Bluetooth headset.
Before using a Bluetooth headset, you must first understand and become
familiar with the Bluetooth capabilities of your phone.
Product parameters
Bluetooth Protocol: A2DP/HFP/AVRCP/SPP
Bluetooth distance: 10 meters
Rechargeable battery capacity: 400 mA
Headphone battery capacity: 50 mA
Headphone charging time: 1 hour
Charger output voltage: 5V
Transmission frequency band: 2.4GHz----2.48GHz
Parts List:
Product illustration:
1: Charger
2: Micro USB
3: Charger LED indicator
4: Headphone charging case
5: Hidden button
6: Headphone LED indicator
7: Microphone
8: Charging metal contacts
Wear illustration
For the best audio experience, please do try each different size earbuds,
When worn properly, feel tight, comfortable and stable inside the ear. When
used outdoors,
Please place the phone on the left side and the large ear cap will have a better
bass effect.
Note: When wearing the ear cap, please press the ear cap to the tightest
position, otherwise the headset may not be able to
perfectly put into the charging case or affect charging.
Binaural operation
1: put in the earphone
Place the headset into the charging case. The headset indicator lights up in
red to indicate that it is charging. After it is full, the blue light goes off after 5
seconds. About 45 minutes can be filled when the headphones are completely
without electricity. If the charge capacity is insufficient, please charge the
charging case first.
2: Remove the headset
After removing the L and R headsets from the charging case, the headset will
automatically power on, wait for about 10 seconds, and automatically complete
the connection between the headsets. After completing the connection,
Lheadphone indicator lights alternately red and blue, and the R headset
indicator light goes out.
Note: After you remove the headset, if the headset does not start up
automatically, it is possible that during the removal process, repeated contact
with the charging contacts will not result in the automatic turn on. It can be
manually turned on or re-put into the charging case and removed again. The
process of removing the headphones should be as steady as possible.
3: Open the mobile phone Bluetooth, click the pairing name D06-L, complete
the pairing and start using.
4: Follow-up use.
After the pairing with the mobile phone is completed for the first time,
subsequent use only needs to pick out the headset and automatically connect
back to the mobile phone.
5: If the L and R headphones lose connection and only one ear has sound,
please pair the L and R headphones first. The operating mode is: Off state, the
left and right earphones are long pressed at the same time until the red and
blue lights flash alternately, then release the buttons, waiting for about 5
seconds, the red and blue lights flash alternately, Pairing between headphones
is completed when when the R headphone light goes out. Then link the phone.
Monaural operation method
1: When using the L-headset alone, if the L-headphone has been paired with
the phone before in the binaural mode, you only need to turn on the
L-headphone to connect to the phone.
If the L headset was not paired with the phone before, remove the headset
and wait for 10 seconds. When the red and blue lights are blinking, turn on the
Bluetooth and select D06-L to pair.
2: When using the R headphones for the first time, remove the headphones
and wait for 10 seconds. When the red and blue lights flash alternately, turn on
the Bluetooth of the mobile phone and select D06-R to pair.
When using the R headset for the second time, remove the R headset and
wait for 5-10 seconds to automatically connect to the phone.
Functional section
Boot: Remove the auto power on, or press the button for 3 seconds to turn on
the red light flashes.
Turn off: Put yourself in the charging compartment to shut down, or press the
button for 5 seconds to turn off the power when the red light is on.
Play music: click the button once.
Pause Music: Click the button once.
Answering the call: Click the button once when you call.
Hang up: Click the button once when talking.
Rejected: Press the button for 1 second.
Voice switch: Press 3 times when the red light starts flashing.
Last number replay: Double-click the button twice in standby mode.
Next song: In multimedia mode, double-click the button.
Clear pairing: Press and hold down the button for 15 seconds when the
earphones power is off.
Charging instruction
Headphone section: When the power is low, the red light of the headphone
indicator flashes.
During the charging process, the red light of the headphone indicator lights up.
When fullcharging, the red light of the headphone indicator flashes and then
goes off.
Charging compartment: When the power is low, the blue lights of lights at No.1
hole and No.3 flash quickly.
During the charging process, the red light of the No. 2 lamp flashes.
When it is full, the red light of the No. 2 light is on.
The moment the headset is placed in the charging compartment, light No.1 or
light No.3 will flash.
Flashing 4 times means that there is about 75%-100% of the charge
Flashing 3 times means that there is about 50%-75% of the charge in the
charging compartment
Flashing 2 times means that there is about 25%-50% of charge in the charging
chamber
Flashing 1 time means that there is about 0%-25% of power in the charging
chamber
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
-Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
Loading...