ShenZhen CL820W 01 User Manual

Wireless Charge

Heart Rate Monitor

Thank you for selecting this product as your sports fitness product of choice. According to the real-time monitoring of the heart rate, you can adjust your exercise status. Practice has proved that using the heart rate band is very helpful to improve fitness effect and achieve fitness goals. This is a sensor type heart rate monitor with wireless charging and Bluetooth.

Storage Function: 48 Hours

Distance of transmission:

BLE 80M (max),

B. Heat rate chest strap

Rear View

C. To wear chest strap

a) Wet the conductive pads on the rear of the

chest strap with a few drops of water, Saliva or conductive gel to ensure solid contact.

b) Strap the heart rate chest belt across your

chest. To ensure an accurate heart rate signal, adjust the strap until the belt fits snugly below your (chest) pectoral muscles.

USER MANUAL

MODEL NO.: CL820W

IMPORTANT

This product is for sport purposes only and it is not meant to replace any medical advice.

This manual contains important safety and care information, and provides step by step instructions for using this product.

Product specification

Heart rate monitor size:63x38x12 mm

Heat rate meter range: 40bpm~220bpm;

Heat rate meter accurate: 1bpm;

Operation temperature: -10°C~50°C;

Storage temperature: -20°C~60°C;

Battery: 70mAH;

Battery type: rechargeable lithium battery;

Battery life: 30 days (used 1 hour per day);

Waterproof standard: IP68;

Wireless transmission: Ble4.0

DEVICE OVERVIEW

A. Heart rate Transmitter

Front View Rear View

1. Light, indicates product status, working, charging, low power.

2. Left & Right wearing directions

Front View

3. Electrodes

4. Fastening buttons

GETTING STARTED

Unpacking the product. In this box, you will find:

a) Heart rate transmitter

b) Adjustable elastic strap

c) User manual

B. Charging

The transmitter uses rechargeable battery. We suggest you charge the device first When you use it for the first time.

During use, if the red lamp flashes every 3 seconds, it indicates that the device needs to be charged.

1pc

c) Attach the transmitter to the strap, marked ‘L’

towards left.

Learn more CHILEAF products, please visit

our website at www.chileaf.com

1 3

WARNING

Inaccurate heart rate data will be detected if the device is worn in wrong directions.

D. Pairing with a smartphone

This device is a Bluetooth Smart device, compatible and applicable with many iOS and Android devices, including smartphone or smartwatch etc.it must pair with smart device to be use properly.

a) Download apps from the Apple store or

Google play and install it. Compatible apps

are as follows: * Endomondo * Strava * Sports Tracker * MapMyRide * Runtastic * Fitbeat

NOTES

* All brand names and trademarks are properties of their respective owners.

b) To run the installed app on the phone, and

match the devices according to the prompts of the app.

c) Your heart rate will be displayed on your

phone. Enjoy your sports life.

NOTES

a. Move compatible smart device within

three meters from the heart rate monitor.

When pairing, keep a distance of 10 meters from other BLE sensors.

c. After the first pairing, the compatible smart

device will automatically identify the heart rate monitor at each startup.

CLEAN & MAITAIN

a. The accumulation of sweat and salt in the

strap will reduces the accuracy of heart rate measurement. It is recommended to simply rinse the strap after each use. A formal cleaning should be carried out after used every 7 times.

b. Before cleaning the chest, be sure to remove

the device from the strap. This part is not washable.

c. If you want to use the washing machine to

clean the strap, please put it in the laundry bag to prevent the strap from winding.

d. When cleaning, use a small amount of mild

detergent. Do not use detergents that contain harsh chemicals, fabric softeners, bleaches, and abrasives.

e. While washing the straps, make sure water is

no higher than 40°C.

f. Ironing bleaching or heating is prohibited.

g. Do not use washing machine if there is hand

washing mark on the label of the soft strap (below are the marks of machine washing and hand washing).

h. When not in use, remove the sensor module

from the strap to extend the life of the heart rate monitor.

i. Keep the device flat or loosely suspended, not

tightly curled.

j. Do not expose the device to direct sunlight

for a long time.

k. Do not allow chemicals (including bleach,

sunscreen, ammonia, insect repellents etc.) to touch the strap and device.

WARM TIPS

In order to protect the environment, when the product or its parts scrapping, please separate them from household waste or send them to a qualified recycling station, which will disassemble and recycle them according to relevant national regulation. For more information about the recycling and disposal of this product, please consult with local government or recycle station.

EU-DECLARATION OF CONFORMITY

Hereby, Chileaf, declares that ireless Charge

Heart Rate Monitor (model: CL820W) is in

compliance with the essential requirements and other relevant provisions of Directive RED 2014/53/EU. A copy of the signed and dated Declaration of Conformity is available

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the

equipment and receiver.

• Connect the equipment into an outlet on

a circuit different from that to which the receiver is connected.

•

Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.