ShenZhen BBQ100 01 User Manual

Instruction

Thank you for selecting Chileaf Bluetooth BBQ Thermometer. You may choose
meat profile, target temperature or cooking time either on the touch-key display unit or

your smart mobile phone via the corresponding app. When your food is cooked to
perfection, the thermometer will alert. Chileaf BBQ will simplify your grill , let’s enjoy
smart cooking.

Download the Chi-BBQ App in Apple store or Google play store,also
scan QR code to directly install APP.

Packaging contents(上图片)

1. proudct image

MODE

START
STOP

2. Temperature probe & probe holder

3. Metal probe bracket

4. 3xAAA battery
Accessory-metal probe

The BBQ thermometer can work with four metal probes simultaneously. To order an
extra metal probe, please visit our website at www.chileaf.com for more

Overview（需要新图）

MODE

START
STOP

1. cooking mode; cooking status , name of food; doneness level;

2. Target temperature;

3. connecting/pairing icon

4. current temperature

5. Timer

6. Doneness level

7. alert icon for channel

8. Probe of channel

9. °C/°F: temperature measurement unit

10. Probe jack

11.Touch key

12.Low battery indicator

Rear Overview(需要新图)

1.5V LR 03 UM 4

1.5V LR 03 UM 4

1.5V LR 03 UM 4

°C/°F

1. Jack cover

2. °C/°F switched button

3. Battery compartment

4. Stand

5. Sliding hook

Getting start(需要上图)

1.5V LR0 3 UM 4

1.5V LR0 3 UM 4

1.5V LR0 3 UM 4

°C/°F

1. Slide upwards to remove the stand and loosen the screw of battery compartment cover.

2. Install three AAA batteries in the compartment as indicated by the polarity symbols

(+/-).

3. Return the battery compartment cover and stand

Connecting the probe(需要图片)

To connect the probe with the unit , Carefully pull out the rubber cap and then plug the

meat probe into the socket.
For an accurate temperature reading of your grill, you need to insert the tip of the metal
probe as close to the middle of the food as possible ,the wire of the probe is about 1 meter

length and made of heat-resistant material up to 300 °C, do not heat the wire by a direct

fire source.

Setting
You have three options to select your desired mode for your grill. They are

• Meat profile mode: select food type which has been programmed to grill in a preset USDA

approved doneness levels temperature

• Target temperature mode : directly set a desired temperature for your grill

• Timer mode: directly set a timer program for your grilled food

After battery installation of your first use, select a channel for your plugged probe. You need

to set the program for each channel individually.

• Tap -/+ to toggle between CH1,CH2,CH3,CH4

KEY and Operation
The unit will shut down and go into off mode if no operation within 1hour

Press &hold 0.5s any key to wake up during off mode

Press any key to trigger backlight firstly and press again to function in normal mode.

[mode]

- Tap to toggle mode selection : meat --> temper --> timer

用图来标示一下三个模式的画面

MODE

START
STOP

a. Meat profile mode

In meat profile mode, Press & Hold 2 sec to setting meat type , Tap to confirm. Then go to set
doneness level , Tap to confirm.

MODE

START
STOP

b. Temper mode

- After mode selection , set target temperature , Tap to confirm.

MODE

START
STOP

C. Timer mode

- After mode selection , set counterdown time mm→ss , Tap to confirm.

All above Only enable when cooking is stop

[+]

- Tap to change probe display , sequence CH1→CH2→CH3→CH4→CH1

Tap to increase value in blinking during setup

Meat profile mode

meat type is BEEF->VEAL->LAMB->BURGER->PORK->CHICK->TURKEY->FISH->BEEF

Doneness level is RARE->MED RARE->MEDIUM->MED WELL->

WELL DONE->RARE

Temper mode

Target temperature range: 100~464 degree F

Timer mode

Minutes up 99

Seconds up 59

- Press & hold 2s to quickly increase value in setting mode.

- Press & Hold 2 sec to enable BLE pair up 30s in non setting mode

[-]

- Tap to change probe display, sequence CH1→CH4→CH3→CH2→CH1

- Tap to decrease value in setting mode .

Meat profile mode

meat type is BEEF->FISH->TURKEY->CHICK->PORK->BURGER->LAMB

->VEAL->BEEF

Doneness level is RARE->WELL DONE->MED WELL->MEDIUM->MED ->RARE

TEMPER mode

Target temperature range: 100~464 degree F

Timer mode

Minutes up 99

Seconds up 59

- Press & hold 2s to quickly increase value in setting mode.

- Press & Hold 5 sec to resume default in non setting mode

1minutes time out in setting mode.

[start/stop]

- Tap to start / stop cooking

- Tap to stop alert and cooking if alert is trigger.

- Press &hold 2s to turn off the unit if no cooking.

Battery cover

C/F button to change C and F unit.

You can also set all including cooking mode, doneness
level ,temperature ,timer etc. through the

application on your mobile phone.

NOTE

doneness level follows the USDA standards.

Alert
Beep sound will be activated and backlight will be blinking once cooking is ready.

Specification
UNIT

item

Description

Size LxWxH

116x78x24.5mm

Weight(including battery)

159g

Temperature measuring rang

14°F to 572°F(-10~+300°C )

Temperature accuracy

±1.8°F (±1°C )

Measurement cycle

6s

Power

3xAAA 1.5 battery

Heat resistance for table stand

Around 60 °C (140 °F)

RF range

300feet(100m)

METAL PROBE

item

description

Probe Length

5.7’’(145mm)

weight

20.8g

Cable length

3feet(1m)

Temperature range

14°F to 572°F(-10~+300°C )

Visit our website www.Chileaf.com to learn more
about Chileaf products.
For any enquiry, please contact our Customer Services

At [e-mail].

CE and FCC statement

Hereby, Chileaf, declares that Chi- BBQ Thermometer (model: BBQ100) is in compliance with

the essential requirements and other relevant provisions of Directive RED 2014/53/EU. A

copy of the signed and dated Declaration of Conformity is available

changes or modifications not expressly approved by the party responsible for compliance could

void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

-- Consult the dealer or an experienced radio/TV technician for help.