Shenzhen AS201 User Manual

Download

Page 1

Multi-application | Satellite Tracking | Wireless Sensor Connection

GSM/GPS ALARM

TRACKING KIT

AS201 USER’S GUIDE

Page 2

2/20

Content Index

1-Introduction:................................................................................................................................................................ 3

1.1- Instruction of Safety:...............................................................................................................................................3

1.2-Specification............................................................................................................................................................. 3

1.3-Typical Application:..................................................................................................................................................4

1.4-Package Contents:.....................................................................................................................................................4

2-Knowlege Before Usage:.............................................................................................................................................5

2.1- How it works?..........................................................................................................................................................5

2.2 Factory Default Setting.............................................................................................................................................5

2.3 Power Supply............................................................................................................................................................6

2.4 Transmitter Operation............................................................................................................................................... 6

2.5 How to configure device (Configuration)................................................................................................................ 7

2.6 I/O Introduction and Definition................................................................................................................................9

2.7How to insert Simcard to AS201............................................................................................................................. 10

3. Functions and Operation:..........................................................................................................................................11

3.1 Arm/Disarm.............................................................................................................................................................11

3.2 Alarm Alert functions.............................................................................................................................................11

3.3 Remote stop Oil/Power supply for engine (Immobilizer)...................................................................................... 12

3.4 Power Saving.......................................................................................................................................................... 12

3.5 Shock Alert ,Crash accident alert and Crash accident data logger.........................................................................13

3.6 Voice Listen-in........................................................................................................................................................ 14

3.7 Switch ON/Off Siren...............................................................................................................................................14

3.8 Battery Low Alert................................................................................................................................................... 15

3.9 Recovery Factory Default.......................................................................................................................................15

3.10 Remote Reboot......................................................................................................................................................15

3.11 Locate in parking Lot............................................................................................................................................15

3.12 GPS Tracking features.......................................................................................................................................... 15

3.13 Emergency Medical/Information Call to Center( Two way intercom):............................................................... 17

3.14 Remote Door Lock/Unlock...................................................................................................................................17

3.15 Mute Output control for Original car Radio:........................................................................................................18

3.16 Arm/Disarm Status LED Indicator....................................................................................................................... 18

3.17 Doppler Movement Detection.............................................................................................................................. 18

3.18 Wireless Sensor Detection.................................................................................................................................... 18

3.19 Daily Travel Mileage SMS report to Driver ( A authorization Phone No.)......................................................... 19

3.20 OTA firmware....................................................................................................................................................... 19

4. Problem Shooting......................................................................................................................................................20

APPENDIX...................................................................................................................................................................20

Page 3

3/20

1-Introduction:

AS201 is a GSM/GPRS/GPS alarm tracking box for multi applications.

This small unit is equipped with Quad Bands GSM/GPRS module, Hi-sensitivity GPS receiver and 3D

Accelerometer. It’s also can be connected with optional wireless/wired accessories like PIR senor, Doppler

Movement sensor, RF Key Fob, Alarm siren and Relay for external electronics device control

It supports both GPS tracking and backup LAC/CID tracking, which brings an idea solution with no blind tracking

both indoor and outdoor.

1.1-Instruction of Safety:

- Do not disassemble the device more than it is allowed. If the device is damaged, the power supply cables are

not isolated or the isolation is damaged, before unplugging the power supply, do not touch the device.

- All wireless data transferring devices produce interference that may affect other devices which are placed

nearby.

- The device may be fitted only by qualified personnel.

- The device must be firmly fastened in the predefined location.。

- The device is susceptible to water and humidity in environment with IP class greater than IP67.

- Any installation and/or handling during a lightning storm is prohibited.

- Ensure that the batteries are not immersed in water. When stored, keep the device in a cool and dry place.

- Ensure that device and batteries are not exposed to hot surfaces or direct sunlight.

1.2-Specification

- Physical Specification:

• Dimension: 90x53x23mm

• Weight: 0.1Kg

• Enclosure: Aluminum Metal Box

• Connector:

Molex 18Pin Connector,6Pin Molex Connector and one 4Pin Molex Connector

SMA Connector for GSM/GPS antenna

Mini USB port for configuration and firmware update

- Power Supply:

• Voltage: 9-36V DC

• Power Consumption:

70-150mA(All active)/

Simple Sleep:<20mA (GSM ON, GPS Off, Alarm trigger active)

Deep Sleep: <5mA (GSM Off, GPS Off, Alarm trigger active)

• Internal Battery:800mAH, 3.7V

- GPS Navigation:

• Antenna: External

• Receiver: uBlox NEO 6M engine

• Sensitivity: -162dBm

• Navigation Update: 1Sec

• TTFF: Cold Starts: 29s/Aided Starts: <1S/ Hot Starts: <1S

Page 4

4/20

- GSM:

• Antenna: External

• Modem: QUECTEL M35 /Quad Bands:850/900/1800/1900MHz

- Radio Frequency:

• Working frequency: 433MHz.

• Code: 1527/2240 study

• Working Voltage: 12V ( 27A 12V dry battery)

• Control Distance: 20-50M

- Environmental:

• Working Temp.: -20℃ ~ +75℃

• Humidity: 20-95%

1.3-Typical Application:

• Car, truck, trailer and other special machinery like excavator and forklift)

• Motor Homes

• Boats & Yacht

1.4-

Package Contents:

1.4.1Standard Package Contents

1) AS201 GPS Alarm Tracker x 1PC

2) GSM Antenna x 1PC

3) GPS Antenna x 1PC

4) 14Pin Power+I/O Wire harness x 1PC

5) Panic Button x 1PC

6) Engine Cut-off Relay x 1PC

7) Microphone x 1PC

1.4.2 Optional Accessories

Page 5

5/20

Note:

Please kindly noted that optional accessories are not available in the standard package. But they are available for

purchase separately from manufacturer.

2-Knowlege Before Usage:

2.1- How it works?

The AS201 mainframe works as a host box with multi input/outputs. The mainframe will process to get GPS

location and various working status from inputs and wireless sensors, and then send those information to preset

Phone Numbers or IP/Port Server via GSM network. Cell Phone or Server software can send commands to control

outputs action and also acquire different information by available commands.

2.2 Factory Default Setting

• Device SMS Command Password: 1234

• IP/Port/APN: Empty

• Alarm Alert Phone No.(A/B/C/D/G): Empty

• Arm/Disarm Status: Disarmed

Page 6

6/20

• Speed Over Limit: Off

• GEO Fence: Off

• Data Transmit Mode: SMS Default when GPRS Parameter is not configured

• Siren: ON

• Automatic Immobilizer in Armed status: Disabled

• Automatic Power supply switch from external to internal when external power low: Enabled

• External Power low voltage Alert Level: less than 11.5V DC

• Re-Arm: Disabled

• Power Saving Mode: Simple Sleep

• SMS Data Time Zone: GMT+0

• Crash accident Logger and alert : Off

2.3 Power Supply

2.3.1 External Power and Internal Power

AS201 works with two power supply mode: External Power and Internal Battery.

It's working normally with external power supply range from 9-36V DC. When the external power is disconnected

or with low voltage output, device will switch to work on internal battery automatically. And it also will send"

Circuit Cut Off" or "External power low voltage" Alert to preset Alerts Phone Numbers.

2.3.2 Sleep Mode consumptions and how it works

Simple Sleep when Ignition Off:

GSM Sleep with SMS/Call Active, NO GPRS Connection and GPS shut down

All Alarms Detection working normally

Power Consumption in standby without alarm trigger: 10mA

Deep Sleep when Ignition Off:

GSM Shut down, NO SMS/Call active, GPS shut down

Alarms trigger detection: Off 6seconds, detect 2seconds in recycle

Average power consumption without alarm trigger: <5mA

NO sleep when Ignition Off:

GSM all ON with SMS/Call active, and GPRS connected with Server with continuously data sending

GPS ON

All alarm detection work normally

2.4 Transmitter Operation

2.4.1 Transmitter Button functions

Disarm

Arm

Mute

Panic (Siren)

Page 7

7/20

Arm: Buzzer sound once, or direction light flash once

Disarm: Buzzer Sound Twice or direction light flash twice.

Mute Key: In siren sounding, press this button to stop the sounding.

In panic, Activate Siren to sound. Or in parking lot, press this button for car finding.

2.4.2 Transmitter and wireless sensor Program to AS201 box(OVERRIDE)

If your transmitter is lost or damaged, or the transmitter battery is flat, the system can be overridden by

Ignition switch conjunction with Panic Button.

Please follow below process to finish the transmitter overridden operation:

1. Send SMS command to clear all existing transmitter code which stored in the system

2. Disarm the system by SMS command

3. Press and Hold Panic button

4. Switch Key from ACC off to ON position continuously 7times

5. Buzzer will sound once to indicating Overridden mode entered

6. Press any button of the transmitter

7. Buzzer sound twice again to indicate override success and exit overridden mode

If system get into overridden mode, and no transmitter button was pressed or did not receive any

incoming signal during 20seconds, buzzer will sound bibibi three times and exit override mode

After you pressed the transmitter button during overridden mode, but system failed in accident due to

unexpected reason, system also will sound bibibi three times to indicate failure.

You can start the process again until you get it work success.

Note:

For other wireless sensor, like Door/window contact, Smoke and gas detectors follow the same process to

integrate them to system.

2.5 How to configure device (Configuration)

AS201 box support configuration via SMS commands and also via PC program tool(Configurator) via

connect AS201 with PC through USB cable.

2.5.1 Configure by SMS commands:

Page 8

8/20

2.5.2 Configure by PC tool “ Configurator”:

1. Connect AS201 with PC via USB cable:

2.Install CP2102 USB-Serial Driver:

Page 9

9/20

3. Run AS201 configurator.exe and get into following interface:

2.6 I/O Introduction and Definition

1. Main I/O ports Introduction:

Page 10

10/20

2. I/O Pin slot Definition

L1 18Pin Port Pin slot definition:

L1 Molex

18Pin

Connector

Wire

Description

Pin No.

Wire Color

Function/Specification Description

Power

Red/White

Power positive pole, 9-60V DC

Black/White

Ground

Digital

Output

Purple/White

Over speed Buzzer(=0V,Effect)

Yellow

Siren/Hazard Light(12/24V, Effect)

Blue

Lock Door(=0V, Effect)

Blue/White

Unlock Door(=0V, Effect)

Brown/White

Mute-Control (=0V, Effect)

Grey/White

Engine Immobilizer (=0V, Effect))

Digtal Input

Red

Ignition status Detection(=0V, Off)

White

Door Status( =0V: Open)

Orange/White

Panic Button(=0V:effective)

Blue/White

ShortCall(=0V, Effective)

Arm/Disarm

Status LED

Black/White

LED -

Yellow/White

LED +

Microphone

Orange

Mic+

Balck/White

Mic-

3W Speaker

Green/White

Speaker +

Black/White

Speaker -

2.7How to insert Simcard to AS201

Page 11

11/20

3. Functions and Operation:

3.1 Arm/Disarm

Arm/Disarm:

Arm: In armed status after ARM operation, any illegal events happened in I/O ports or Wireless sensor will trigger

Siren sound and SMS alerts.

Disarm: Opposite to Arm, user is free to do any operation but no alarm alert will be triggered.

Re-Arm:

Re-Arm is a function which is automatic arm again if the system was disarmed wrongly by mistakes and kids press.

- Trigger condition:

If in Armed status, the system was disarmed, and get no Door open or Ignition status operation within 60Seconds,

system will automatic arm once.

AS201 system allow user to enable/disarm Re-arm function according user’s usage habit.

Re-Arm function Enable/Disarm Method:

Enable SMS command: *1234*REARMON#

Disable SMS command: *1234*REARMOFF#

3.2 Alarm Alert functions

In Armed status, any illegal operation which happened in I/O ports and wireless sensor will trigger an alarm action.

In alarm, the alarm siren will sound for 20seconds, and also send alarm alert via SMS and missed call to preset

phone numbers A/B/C.

Please check following alarm events alert system:

Functionality

ABC

Alarm Siren

Sound

7-24Tr acking Server

Shock alarm

SMS Once

20Seconds Sound

Yes

External Power

Disconnection

SMS Once

20Seconds Sound

Yes

Ignition ON

SMS Once

20Seconds Sound

Yes

Panic Alarm

SMS Once

Yes

GEO In/Out Alarm

SMS Once

Yes

Speed Over Alarm

SMS Once

Speed Buzzer==>>over

timer with siren/light

warning and immobilizer

activated until speed

below limit

Yes

Intrusion

Alarm(Doppler)

SMS Once

Panic

20Seconds Sound

Yes

Crash Accident Alert

SMS Once

Yes

External battery Low

SMS Once

Yes

Page 12

12/20

Voltage

External Battery

Charge Alert

SMS Once

Yes

Daily Travel Mileage

SMS Report

SMS Once

Call-IN Direct for

voice Listen-in

yes

Yes

Wireless sensor

Trigger Alert(Smoke,

PIR, Gas, Magnetic

Door sensor)

SMS Once

SMS

Once

20Seconds Sound

Yes

Short-Call

Yes

3.3 Remote stop Oil/Power supply for engine (Immobilizer)

1. Remote cut off Oil/Power supply for engine:

By SMS Command: *1234*STOP#

Operation from smart Phone App command:

Operation from Server Platform Command:

2. Release engine cut-off to allow start

By SMS Command: *1234*K#

Operation from smart Phone App command:

Operation from Server Platform Command:

3. Automatic Ignition starter lock in armed status

In Armed status, the system will keep Oil/Power supply in locked status. This is to protect burglar ignore alarm

alerts and start vehicle to drive away.

This function is default as Disabled. If the user want to activate this function, can use SMS command sent AS201

inserted SIMCARD number to switch on and off this feature.

*1234*autoCutON#

1234*autoCutOff#

3.4 Power Saving

The system is designed to have different sleep mode when ignition off. In different sleep mode, the power

consumption are different. Details please check <2.3.2 Sleep Mode consumptions and how it works>.

The user can use SMS command to configure device to be in different Sleep mode to save vehicle battery

consumption.

Check <2.5.1 Configure by SMS commands >

Page 13

13/20

3.5 Shock Alert ,Crash accident alert and Crash accident data logger

AS201 box is with built-in 3D Acceleration sensor (G sensor) on board.

The device use this G sensor created three functions.

1. Shock Alarm

CAT+-1X will detect all X,Y,Z acceleration always, any changes in all X,Y,Z axis will be calculated, every changes

over 0.1G, system calculated for shocking once, every 5Seconds scan and calculate once.

We use 5seconds average shocking times as shocking sensitivity to generate Shock Alarm alerts in Armed Status.

1=most sensitive

200= Most insensitive.

SMS commands for adjusting shocking sensitivity:

*1234*VS*xxx# (xxx=001-200)

Switch On/Off Shocking Alarm SMS commands:

*1234*H# <Switch On shocking Alarm>

*1234*N# <Switch Off Shocking Alarm>

2. Accident Alert for A/B/C Numbers

By configure AS201 installation position and X,Y,Z axils value to setup the accident alert value limit as trigger

conditions.

AS201 provides two ways to configure:

- Configure By SMS commands

*1234*CS*m,x.x,y.y,z.z#

Note:

M value is the AS201 box sides serial No. It’s user identification purpose. User Can define any sides of the 6Sides

as forward direction. Just keep it as this way in installation.

- Configure by Configurator program:

Page 14

14/20

Any axils exceed the configured G value, it will trigger the accident alert

3. Crash accident data logger for before/After 15Seconds in accident time

AS201 will record recent 3Times Accident G varies truth in memory. And allow user to load out via USB

connection through the Configurator program. And recover back all details information via chart.

Check as following picture:

1) By click “Read Accident Log” button to download AS201 recorded Accident Data

This process will take several minutes before download finish.

2) Display accident data log via chart with time frame and G value varies:

3.6 Voice Listen-in

Call Center Number D and SMS center Service No. G call AS201, the system will put through to Voice Listen-in

mode directly.

AS201 also provide other two methods to start Voice listen-in Operation:

1. By SMS command with correct password to AS201 box to get re-call back

*1234*VMxxxxxxxx# <xxxxxxx is call back phone No. for system>

2. Via GPS tracking platform Voice Listen-in Command to start Re-call back for voice listen-in

For how to operate this please check 7-24tracking Platform User’s guide for reference.

3.7 Switch ON/Off Siren

By SMS command, user can switch ON/Off siren remotely.

*1234*SIRENON# <Switch On SIREN SOUND>

Page 15

15/20

*1234*SIRENOFF# <Switch Off SIREN SOUND>

3.8 Battery Low Alert

When AS201 detected external battery output is with lower than 11.5V DC, system will generate Battery low alerts

to A/B.C Numbers. And stop draw vehicle battery, will switch to user internal battery for work.

After internal battery is going to use out again, system will generate another alert to A/B/C, and system will go to

deep sleep to avoid killing vehicle battery dead. But keep all alarm detection alive for protection.

3.9 Recovery Factory Default

By sending SMS command *1234*V# recover device to be factory default setting.

Be careful to use this command, because it will request you to re-configure the device again for working properly.

3.10 Remote Reboot

By sending SMS command *1234*Z# reboot AS201 remotely.

This is to solve problem if any operation fail and do quick problem shooting.

3.11 Locate in parking Lot

AS201 provides two methods for user to quick locate where the vehicle is by Siren sound and light flashing.

1. By press Remote controller Siren button to make sound

2. By send SMS command *1234*L# to get AS201 driving siren sound and light flashing.

3.12 GPS Tracking features

3.12.1 Real Time Tracking:

1. Track by SMS command

*1234*WHERE# < To query Text Description Location with street Details>

*1234*FIND# < To query with Google Map link reply>

*1234*GPS# < To query with GPRMC format GPS co-ordinates>

Page 16

16/20

2. Track by ANBTEK Portal (Has to configure IP/Port/APN and get tracking account name and password)

3.12.2 Speed Limit Manage

1. Speed Limit configuration

By sending SMS command *1234*SPD080# configure as speed limit as 80Km/H.

3. Speed Over alert:

After speed limit is break, the vehicle is not slow down to under limit within a configured time period, the AS201

will drive the siren sounding until the speed slow down to under limit. At the same time, AS201 will activate the

“immobilizer” for oil/Power supply for engine to force the driver down. (<<<This function is default disabled by

factory. Only can be used after activate by SMS command>>>).

Speed over SMS alert for A/B/C/G Number with contents:

“Over Speed Alert;2011-12-08 12:32:13,V,60Km/H,Heading:60,LAC:2638,CID:0ECF;

http://maps.google.com/maps?hl=en&q=22.537222,114.020948 “

And AS201 will generate this alert to ANBTEK platform via GPRS data either.

3.12.3 GEO Fencing Management

AS201 maximum allows user to create 25 GEO fencing areas. And the area shape can be circular or rectangular.

Considered text message only can contain 140Bytes text, so user need to create multi-areas with more than one text

message command.

GEO fencing alert support both Entry and Exit event.

Details please check following SMS command definition.

*1234*GEOXXYZ,X1,Y1,X2,Y2;0110,X2,Y2,R2;0220,X3,Y3,R3#

Page 17

17/20

In above sample command, it defined 3 GEO fencing areas. First one is rectangular, second and third one is circular

shapes

*1234* // Command header with password

GEO // Command Name

XXYZ //First Area definition for area ID, area shape and events alert type.

XX is area ID. Ranges=00-24, maximum 25Areas supported=Alert type, Y=1 means entry, Y=2 means exit, Y=3

means alert both in entry and exit. Z=Area shape, Z=0 means circular, Z=1 means rectangular.

X1, Y1, X2, Y2 // Rectangular shape parameter format. (Unit must be degrees, for Western and

southern value put – before it).Taken value as following chart:

0110,X2,Y2,R2 //Circular shape area parameter format.

In this area, Area ID=01, event alert when entry this area, area shape type is circular. X2,Y2 are coordinates for

circle center point. R2 is radius value. See as following picture:

3.13 Emergency Medical/Information Call to Center( Two way intercom):

AS201 has two way audio intercom functions by provided Hands free kits and Short-call button.

By Configurator program or SMS commands, user can configure one Call center Voice service Number D in AS201.

After the short call button was pressed, the AS201 will start to call this D number and connect to talk with Call

center support People.

3.14 Remote Door Lock/Unlock

Page 18

18/20

AS201 get two digital outputs for Door Lock/Unlock via central locking system. This operation can be activate via

Remote controller/SMS Commands/GPRS command of Arm/Disarm operation.

3.15 Mute Output control for Original car Radio:

This Mute output is for audio intercom purpose. When incoming call rings, AS201 will generate a signal to for this

output cable and block Radio voice.

3.16 Arm/Disarm Status LED Indicator

In Disarmed Status: LED Off

In Armed Status: Off 3Seconds, On 2Seconds in recycle.

3.17 Doppler Movement Detection

Doppler sensor is with advantage features comparing to traditional infrared technology of more accuracy, Anti-

interface by sunlight, temperature and wind. The module is with lower current consumption and longer detection

range. It can be placed both indoor and outdoor environment for application.

This Doppler sensor can be placed in Driving cabinet for Car, Farming equipment for theft access protection.

In Armed status, if the Doppler sensor detected movement inside space, AS201 will generate Siren Sound and

Alarm SMS alert:

<< Intrusion Alarm;Time:2011-12-08 12:32:13,V,60Km/H,Heading:60,LAC:2638,CID:0ECF;

http://maps.google.com/maps?hl=en&q=22.537222,114.020948 >>

3.18 Wireless Sensor Detection

AS201 is with 5 wireless Defense Zones which named: H, I, J,K,L

Defense Area Name

Alarm Type Code Define

Sensor Numbers Supported

1= Fire Alarm

2= Gas Leakage Alarm

3= Intrusion Alarm

4= Booth Open Alarm

5= Glass Broken Alarm

All areas supported 1/2/3/4/5 Alarm

type, and Each type can program

5Sensors maxium in one area. Example

H1 can program 5 same Smoke

DetectorsIJ

SMS Alarm Alerts Format:

Area Name+ Alarm Type+ Sensor ID, Date, Time, Speed, Heading, LAC/CID code + Address Google Link

Example <<I Area,Gas Leakage Alarm I2;2014-06-06 14:42:49,A,0Km/H,Heading:0,LAC:2638,CID:0FA1;

http://maps.google.com/maps?hl=en& q=+22.54522,+113.92223 >>

All defense Area can be programmed to be switch ON and Off by SMS command:

*1234*AWAY*H# < Switch ON Area>

*1234*HOME*H# < Switch Off Area>

Page 19

19/20

Default setting is all defense area in ON status.

How to program sensor to AS201 Box?

AS201 allow user to do sensor code programming via two methods: SMS Command and override via Panic button

+ ACC ON/Off switch.

1. Override via panic button and ACC status:

Details please check <<2.4.2 Transmitter and wireless sensor Program to AS201 box >>

2. SMS Command for Wire sensors code Program

Code Program Process:

1) Confirm what type sensor and which area to be coded program

2) Edit SMS command *1234*CODE*H1#( H area, Smoke detector)and send to AS201 SIMCARD.

3) AS201 siren sound once indicates code pending start, within 20seconds; trigger the sensor, if success siren

sounds twice indicate success. And then start another 20seconds wait for second sensor input, maximum 5 sensors

can be programmed. Any fail, siren will sound BIBiBi and exit code program mode.

*1234*ERASECODE# <Erase all defense area all sensor code>

*1234*ERASECODE*H# <Erase signle defense area all sensor code>

3.19 Daily Travel Mileage SMS report to Driver ( A authorization Phone No.)

AS201 designed to have a daily travel mileage SMS report to driver at defined time every day.

Mileage report SMS Format:

Configure Mileage Report Time by SMS Command:

*1234*REPTIME:09:36# <SETUP Mileage Report Time>

Note:

Please configure AS201 Time zone to be your local time before you setup this.

3.20 OTA firmware

AS201 supports firmware upgrading via GPRS.

To use this function, you have to enable GPRS connection on the AS201 command.

Firmware Upgrading SMS command is:

*password*UPGRADE:xxx.xxx.xxx.xxx,9200,CAT1XV1.0.1.bin#

Page 20

20/20

<<Please consult with factory for this upgrading IP address, Password and file name.>>

4. Problem Shooting

APPENDIX

< AS201 Installation Diagram>

Shenzhen AS201 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual