ShenZhen 666 BT2J 7039 User Manual
Professional in your excellent experience
www.proxelle.com
Cosy
Wireless Headset
Proxelle
Manufacture:Forluck Electronics factory
1-11
User manual
1
Safety Instructions
Hearing Safety :
1.To avoid hearing damage,please do not listen for a
long time at high volume.
2. Please be cautiously using or stop using in
potentially dangerous situations.
3. Do not use the headphones while driving.
4. For your safety, please do not turn the volume too
high while running outside, so that you can hear
surroundings.
Operation Safety :
1. Avoid dropping.
2. Do not disassemble.
3. Keep away from children to avoid danger from
improper use.
4. Do not submerge in water.
5. Do not use the device outdoor during thunderstorm.
6. Avoid operate in extreme temperatures, please use
the device within its operation temperature: -15℃
(5℉) - 55℃(131℉).
7. Use original or certied cables to charge.
8. Do not use any corrosive cleaner/oil to clean the
headphones.
English
What’s in The Box
English
R
At a Glance
Multi-function Button
Volume Down
/ Next Song
Microphone
V V
Power Button
Volume Up
/ Previous Song
2 3
English
R
How to Use
English
V V
Press and hold Power Button for 3 seconds to turn on
3s
the headphones, and then the device enter paring
mode.
Press and hold Power Button for 3 seconds to turn off
3s
the headphones.
Short press to adjust volume. Long press to skip to
next/previous song.
Short press Multi-function Button to play/pause music.
Short press Multi-function Button to answer/end call.
Double press Power Button to reject coming call.
Charging Port
3.5mm AUX port
LED Indicator
4 5
Functions
Easy Paring
1.Press and hold Power Button for 3 seconds to turn
on the headphones, and then the device enter paring
mode.
2.Keep the headphones and your Bluetooth device as
close as possible during the pairing process.
3.Turn on Bluetooth function of your Bluetooth
enable device. Search headphones’ Bluetooth signal
on your Bluetooth enabled device, and select
“Proxelle Cosy” to pair it with your Bluetooth enabled
device. The LED Indicator Light slowly ash blue
when the headphones paired successfully.
4.If you are asked for the Password/PIN code during
the pairing procedure, enter “0000” (four zeros).
English
Double press Power Button to redial last number.
3s
Long press Multi-function Button for 3 seconds to enter
Charging: Use the included micro USB charging cable connect
to Charging Port of the device. And another end of the charging
cable connect to either a computer’s USB port or USB wall
charger.
English
4. Back to the rst Bluetooth device and connect to
the headphones again. Then both of your devices
are connected to the headphones.
AUX wired connection ：
The headphones supports AUX input for wired
external audio source connection. Simply Power Off
the headphones and plug in the audio cable.
Voice Dialing ：
Double press Multi-function Button to activate voice
dialing function. (Compatible with iPhone Siri, and
part of Android voice dialing software)
Pair to The Second Bluetooth Device
1.Make sure the headphones has been connected to
the rst Bluetooth device successfully. And the
headphones is not playing music.
2. Press and hold Multi-function Button until the
headphones re-enter paring mode. (LED Indicator
ash red and blue alternately).
3. Pair the headphones to the second device according to “Easy Pairing” steps.
How to Wear
R
6 7
English
R
Specication
English
LED Indicator
·Pairing: Red and blue light blink alternately
·Paired: Blue lights ash
·Playing: Slow blinking blue light
·Charging: Red light bright
·Full Charge：Red light turns off, blue light bright
·Battery Low：Red light turns on with voice prompt
Q&A
1.Q: Why the headphones can’t pair with mobile
phone?
A: Please check whether your headphones is in
pairing mode or reconnection mode，check whether
Bluetooth search function of your Bluetooth device
has been turned on. And then go to Bluetooth menu
of your Bluetooth device, delete/forget the headphones, and reconnect the headphones.
2.Q: Headphones can’t be turned on.
A: Please double check battery status of your
headphones.
3.Q: Can I replace battery for the headphones?
A: No. this headphones use built-in non detachable
Li-Polymer battery. It can’t be replaced.
4.Q: Can I use the headphones while driving?
A: For your safety, we strongly recommend you do
not use headphones to avoid distraction while
driving.
5.Q: Why the headphones sometimes disconnect
with Bluetooth device within 10 meters.
A: Please check if there is metal material within
relatively close range may interfere Bluetooth
connection. Because Bluetooth is a radio technology
that is sensitive to objects between the headphones
and its connected devices.
8 9
English
Technical Specication
·Product Name：Cosy
·Battery capacity：：250mAh
·Input：5V 200mA
·Charging time：1.5 hours
·Using time：15 hours
·Bluetooth version：V4.1
·Chip：CSR
·Bluetooth prole：A2DP, AVRCP, HSP, HFP, APTX,
CVC
·Bluetooth Range：10m/33ft
·Waterproof rating：IPX4
·Net weight：168g
·Impedance：22Ω
·Driver：φ40mm
·Frequency response：20-20Kh
6.Q: Why cannot hear sound from your computer or
English
mobile phone?
A: Please check whether the output channel of your
computer support A2DP prole. And please check
volume of your headphones, as well as computer/mobile phone.
7.Q: Why I unable to use the headphones to control
volume of select track of APP in my mobile phone?
A: Due to conguration for different applications’
software, the headphones may not totally compatible
with some applications.
R
10 11
FCC Caution.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used
in portable exposure condition without restriction.
Loading...