Customer Specification
15.3 Inch Color LCD Display
Model: HL1530
Name Department/Title Date Signature
Change History
Version Date Author Modification
A0 2013-5-29 Zhai Tao
Jin Zhonghua
Zou Yanyan
A1 2013-12-10 Zhai Tao
Jin Zhonghua
Zou Yanyan
Preliminary
Update the Label information
Add mechanical color details
Update the new 2D drawing
illustrate the part of sheet metal.
Add 3.1 section, Note1 and
Note2
Add 2.3 section Note3
Last change:
2013-12-10
Copyright @ Shenyang
Torch-Bigtide Digital Tech.,Co.,Ltd
HL1530
Page 1 of 25
CONTENTS
1. SCOPE.................................................................................................................................................. 4
Abbreviations............................................................................................................................................5
2. ELECTRICAL PER FORM ANCE....................................................................................... ... ............ 6
2.1 Power Supply ................................................................................................................................................6
2.2 Power Management......................................................................................................................................6
2.3 Interface.........................................................................................................................................................6
2.3.1 Signal Specifications................................................................................................................................................7
2.3.2 HDMI connector.......................................................................................................................................................7
2.3.3 USB 2.0 Interface.....................................................................................................................................................8
2.3.4 Power connector.......................................................................................................................................................8
2.3.5 Serial Port.................................................................................................................................................................9
2.4 Panel Features...............................................................................................................................................9
2.5 Display Performance...................................................................................................... ..............................9
2.5.1 Standard Testing Conditions.....................................................................................................................................9
2.5.2 Brightness...............................................................................................................................................................10
2.5.3 V iew angle............................................................................................................... ...............................................10
2.5.4 Luminance Uniformity...........................................................................................................................................10
2.5.5 Contrast ratio..........................................................................................................................................................10
2.5.6 White Color Coordinates........................................................................................................................................10
2.5.7 Response Time .......................................................................................................................................................10
2.5.8 Color Gray..............................................................................................................................................................10
2.6 Touch screen Performance ........................................................................................................................10
2.6.1 Features..................................................................................................................................................................10
2.6.2 General Specification.............................................................................................................................................11
2.6.3 Environmental Characteristics................................................................................................................................11
2.6.4 Optical Characteristics............................................................................................................................................11
2.6.5 Electrical Characteristics........................................................................................................................................11
3. MECHANICAL SPECIFICATIONS................................................................................................ 14
3.1 Outline Dimensions & Weight...................................................................................................................14
3.2 Mechanical Color........................................................................................................................................15
3.3 Packaging ....................................................................................................................................................15
3.4 Texture.........................................................................................................................................................16
3.5 Label.......................................................................................................................................................16
3.5.1 Production Label....................................................................................................................................................16
3.5.2 The color of Product Label.....................................................................................................................................16
3.5.3 Packaging Label.....................................................................................................................................................16
3.5.4 Manufacture Serial Number...................................................................................................................................17
3.6 Cleanability............................................................................... ..................................................................17
4. ENVIRONMENT CONDIT ONS................................................ .. ................................ ... .................. 18
4.1 Operation Environment（Philips XN-039059） .....................................................................................18
4.2 Transport and Storage (Packed) （Philips XN-039059） .....................................................................18
Last change:
2013-12-10
Copyright @ Shenyang
Torch-Bigtide Digital Tech.,Co.,Ltd
HL1530
Page 2 of 25
4.3 Mechanical Load.........................................................................................................................................18
4.4 Packed unit..................................................................................................................................................19
5. REGULATION.............................. ................................ ... ................................ ..................................19
5.1 Safety Specifications...................................................................................................................................19
5.2 Electromagnetic Compatibility..................................................................................................................19
5.3 RoHS Compliance.......................................................................................................................................19
6. MTBF & Warranty............................................................................................................................. 19
7. DEFECT, SCRATCH and DUST...................................................................................................... 19
7.1 Environment condition...............................................................................................................................19
7.2 Dot Defect................................................................................................. ...................................................20
7.2.1 Close defect dots ....................................................................................................................................................21
7.2.2 Linked defect dots..................................................................................................................................................21
7.2.3 Appearance specification........................................................................................................................................23
8. Cosmetic Specifications and Acceptance Criteria Summary (Touch Panel)...................................24
Last change:
2013-12-10
Copyright @ Shenyang
Torch-Bigtide Digital Tech.,Co.,Ltd
HL1530
Page 3 of 25
1. SCOPE
This document defines the performance requirements for a 15.3-inch TFT LCD color monitor with touch
screen for medical use. This product is controlled by model name; any change will be recorded in the list
and confirmed by customer.
This high-resolution color display is specifically designed to meet the rigorous performance standards
needed for surgery. To guarantee image integrity, features include accurate signal conversion.
The monitor is a Field Replaceable Unit, and has no field serviceable parts. The monitor is not intended
for any disassembly in the field or by Philips.
The touch screen is usable in the WinPE3.0 pre-installation environment or Windows 7 environment.
Monitor Character:
No display settings related controls shall be available for the user
The monitor shall not require any configuration setting.
Last change:
2013-12-10
Copyright @ Shenyang
Torch-Bigtide Digital Tech.,Co.,Ltd
HL1530
Page 4 of 25
Abbreviations
The following abbreviations are used in this document:
Acronym Definition
ABS Acrylonitrile Butadiene Styrene
CR Contrast Ratio
DC Direct Current
DDC Display Data Channel
EDID Extended Display Identification Data
FPC Flexible Printed Circuit
GND Ground
HDMI High Definition Multimedia Interface
I2C IC to IC Communication
LCD Liquid Crystal Display
LED Light Emitting Diode
MTBF Mean Time Between Failures
PC Polycarbonate
PCAP Projective Capacitive
P/N Part Number
RoHS Restriction of Hazardous Substances
USB Universal Serial Bus
Last change:
2013-12-10
Copyright @ Shenyang
Torch-Bigtide Digital Tech.,Co.,Ltd
HL1530
Page 5 of 25
2. ELECTRICAL PERFORMANCE
2.1 Power Supply
Tab le 2.1
-Input Voltage : DC12V ± 10%
- Current (max) : 3.0 A
- Power Consumption : <40W
2.2 Power Management
The following table shows the power consumption feature:
Table 2.2
VESA Modes
Normal operation Active Active Active Green Less than 40 W
Active-off mode Inactive Inactive Blanked Green blinking Less than 15W
While there is no sync or active video supplied by the system, the Power indicator LED will be in green
blinking status, and the monitor screen will display "No Signal Present".
Horizontal
Sync
Vertical Sync Video
Power
Indicator
Power Consumption
2.3 Interface
USB (Type A) USB (Type B) HDMI DC Power Power Indicator LED
PE
PE
Notes:
1. The monitor shall have a receptacle connector for power supply, capable for mating a “2-P UMNL
Universal Mate-N-Lock” connector.
Last change:
2013-12-10
Figure 2.1
Copyright @ Shenyang
Torch-Bigtide Digital Tech.,Co.,Ltd
Conn.PE
HL1530
Page 6 of 25
2. Print the following information in specific regions on the surface of metal plate: X1, X2, X3, X4,
X100.
3. Conn.PE(X100) is M4*14mm stud with 2 flat washers and nut. Use to secure protective earth
connection from the Host cable.
The corresponding relations as follows:
Connector Label
USB out X4
USB in X3
HDMI X2
Power X1
Ground(PE) X100
2.3.1 Sign al Specifications
Table 2.3
Item SPEC
HDMI single link
HDMI Port
TMDS: 600mV for each differential line
Input Impedance: 50 ohm
HDMI EDID datum EDID via HDMI I²C bus
DigitaL (HDMI) EDID
Week, year
00 FF FF FF FF FF FF 00 0A 84 16 19 01 00 00 00
32 13 01 03 81 26 1E 78 2E AE A5 A6 54 4C 99 26
14 50 54 BF EF 80 81 80 01 01 01 01 01 01 01 01
01 01 01 01 01 01 30 2A 00 98 51 00 2A 40 30 70
13 00 78 2C 11 00 00 1E 00 00 00 FD 00 38 4B 1E
51 0E 00 0A 20 20 20 20 20 20 00 00 00 FC 00 48
4c 31 35 33 30 56 0a 20 20 20 20 20 00 00 00 10
00 00 3D 40 00 C0 03 00 78 2C 11 00 00 1E 00 F6
Serial number
HL1530
Note: the datum above for reference only. Serial number, week and year will be changed according to
manufacture order.
2.3.2 HDMI connector
Table 2.4
Pin - Assignment of 19-pin HDMI Female Connector
Pin 1 - TMDS Data2+ Pin 8 - TMDS Data0 Shield Pin 15 - SCL
Pin 2 - TMDS Data2 Shield Pin 9 - TMDS Data0– Pin 16 - SDA
Pin 3 - TMDS Data2– Pin 10 - TMDS Clock+ Pin 17 - DDC/CEC Ground
Pin 4 - TMDS Data1+ Pin 11 – TMDS Clock Shield Pin 18 - +5V Power
Pin 5 - TMDS Data1 Shield Pin 12 - TMDS Clock– Pin 19 - Hot Plug Detect
Pin 6 - TMDS Data1– Pin 13 - CEC
Pin 7 - TMDS Data0+ Pin 14 - Reserved (N.C. on device)
Last change:
2013-12-10
Copyright @ Shenyang
Torch-Bigtide Digital Tech.,Co.,Ltd
HL1530
Page 7 of 25
Figure 2.2 HDMI connector
2.3.3 USB 2.0 Interfa ce
The monitor supports touch function, the touch screen can be used in the Microsoft® Windows 7.
Figure 2.3 USB-A connector
Figure 2.4 USB-B connector
Table 2.5
Pin Signal
1 VBUS
2 D-
3 D+
4 GND
USB A-Type
Used for external USB function, such as a USB mouse, flash disk.
USB B-Type
USB is connection to host system, in order to enable Touch panel.
2.3.4 Power co n n e c t o r
The power connector use TE AMP 1-350942-0.
Figure 2.5 Power connector
Power connector could mate a “2-P UMNL Universal Mate-N-Lock” connector.
Last change:
2013-12-10
Copyright @ Shenyang
Torch-Bigtide Digital Tech.,Co.,Ltd
HL1530
Page 8 of 25
t
2.3.5 Seria l Po r t
Figure 2.5 Serial Port
Serial port for factory firmware upgrade(Port located under the VESA plate mounting).
Serial Por
2.4 Panel Features
Table 2.6
Panel Module NL12876BC26-32D
Panel Type a-Si TFT-LCD
Size 15.3” (39 cm diagonal)
Aspect Ratio 15:9 (W:H)
Active Display Area 334.08 (H) x 200.45 (V) mm
Resolution 1280 (H)x 768 (V) pixels
Pixel Pitch 0.261(H) x 0.261(V) mm
Color Depth 16.7M
Lamp Type LED (Replaceable module)
Surface Anti-glare polarizer
2.5 Display Performance
2.5.1 Standard Testing Conditions
Table 2.7
- Warm up time
- DC supply voltage 12V DC
- Ambient temperature 25 ± 2ºC
＞20 minutes.
- Relative Humidity 30% --80%
- Video signal 1280 x 768 @ 60Hz; HDMI
- Ambient Environment Dark
- LUT Setting Native
- Luminance meter Minolta CA-210/CA310 or equivalent
Last change:
2013-12-10
Copyright @ Shenyang
Torch-Bigtide Digital Tech.,Co.,Ltd
HL1530
Page 9 of 25
2.5.2 Brightness
The light output shall be set on 370Cd/m2 output during manufacturing. When this light output cannot
be reached, but the panel is within specification, the light output should be set to maximum output.
2.5.3 View angle
Left/Right: 88/88 degree (Typ.); 80/80 degree (Min.) (CR≥10) (Note 2)
Up/Down: 88/88 degree (Typ.)/; 80/80 degree (Min.) (CR≥10) (Note 2)
2.5.4 Lumi na n c e U n i f o r mity
LU less than 1.3 (Note 5)
2.5.5 Contrast ratio
700:1 (Typ.) (Note 3)
500:1 (Min.)
2.5.6 White Color Coordinates
x=0.313±0.05 y=0.329±0.05
2.5.7 Response Time
Typical (Tr+Td): 14+11ms (Note 6)
Max. (Tr+Td): 20+15ms (Note 6)
2.5.8 Color Gray
256gray levels should be displayable
2.6 Touch screen Performance
2.6.1 Features
Table 2.8
Item Specification
Type PCAP
Input Mode Finger
FPC
Cable
Interface Type
USB 2.0 interface (
Voltage & connection provide by host system.)
Last change:
2013-12-10
Copyright @ Shenyang
Torch-Bigtide Digital Tech.,Co.,Ltd
HL1530
Page 10 of 25
2.6.2 General Specification
Table 2.9
Item Specification
Frame Size 385.08mm X251.45 mm
Tolerance -0.2,+0.2mm
Active Area 334.08 X200.45mm
Black Silkscreen 25mm perimeter outside viewable area
Surface Treatment
Chemically hardened glass, no anti-reflective treatment
Total Thickness 3.20±0.50 mm
Attachment Optically bonded to TFT LCD Module
Notes:
The touch screen controller support grip suppression and palm rejection algorithms.
2.6.3 Environmental Characteristics
Table 2.10
Item
Specification
Temperature Humidity (Non Condensing)
Operation -30°C ~ +70°C 20%RH ~ 90%RH
Active Area -30°C ~ +80°C 10%RH ~ 90%RH
2.6.4 Optic a l Characteri s tics
Table 2.11
Item Specification
Transmissivity
≥85%
2.6.5 Electrical Characteristics
Table 2.12
Parameter Min Typ. Max Units Remarks
Digital Power Supply (VDD) 3.6 5.0 5.5 V
Active Current ─ 30 ─ mA Note 1
Sleep Current ─ 5 ─ μA
Accuracy ±1.5
Resolution
─
─
─ ─
─
─
4096
4096
%
─
─
X (long axis)
Y (short axis)
Note: Active power varies based on a number of controllable parameters as well as the number of touches
per second.
Last change:
2013-12-10
Copyright @ Shenyang
Torch-Bigtide Digital Tech.,Co.,Ltd
HL1530
Page 11 of 25
Remark:
1. Parameters
The relevant touch panel parameters are developed between Philips and Ocular. The parameter
settings are pre-loaded by standard firmware loading of the touch panel controller at Ocular factory. The
parameter file shall be under configuration control.
2. Firmware Version
Firmware is released by Ocular to maintain manufacturing configuration control.
Version: F153-1664S-001 V2.0.xcfg
3. Calibration
The P-Cap sensor is matrix based. No calibration is required.
Note1: Test Equipment Setup
The measurement should be executed in a stable, windless and dark room between 20 minutes after the
backlight at the given temperature for stabilization of the backlight. This should be measured in the center of
screen. Test equipment should be equivalent with the following equipment.
Environment condition: Ta=25 ± 2ºC
Note2: Viewing angle is measured as follow:
Note 3: Definition of contrast Ratio (CR):
Last change:
2013-12-10
Copyright @ Shenyang
Torch-Bigtide Digital Tech.,Co.,Ltd
HL1530
Page 12 of 25
Ratio of gray max (Gmax) & gray min (Gmin) at the center point of the panel.
Gmax: Luminance with all pixels white
Gmin: Luminance with all pixels black
Note 4: Definition of Luminance of White: Luminance of white at center point.
Note 5: Definition of luminance uniformity
The luminance uniformity is calculated by using following formula.(Under White Screen Status)
Note 6: Definition of response time is as follows:
Response time is measured at the time when the luminance changes from “black” to “white”, or
“white” to “black” on the same screen point, by photo-detector. Ton is the time when the luminance
changes from 10% up to 90%. Also Toff is the time when the luminance changes from 90% down to
10%(See the following diagram.).
When the display data is changed from white to black, response time is measured.
Last change:
2013-12-10
Copyright @ Shenyang
Torch-Bigtide Digital Tech.,Co.,Ltd
HL1530
Page 13 of 25
3. MECHANICAL SPECIFICATIONS
3.1 Outline Dimensions & Weight
Figure 3.1
Table 3.1
Item Set
Color of main enclosure and rear cover Pantone Cool Grey 1M
Color of bezel Pantone Black 2M
Housing components Plastic(ABS+PC)
Visible screen surface Approx. 334.08 (H) x 200.45 (V) mm
Degree of protection IP21
Connection panel At rear VESA 75 x 75 mm
Net weight 4Kg
Note 1: The monitor shall not require specialized mechanical installation tools. Use of slotted or Phillips
screwdrivers or Allen keys is allowed. Torx is not allowed.
Note 2: VESA screws should be between 8.2mm and 9.7mm. Entrance of screws longer than 9.7mm will
be blocked by threaded nuts, to prevent and damage to internal components.
Width 390.08mm
Depth 256.45mm
Last change:
2013-12-10
Copyright @ Shenyang
Torch-Bigtide Digital Tech.,Co.,Ltd
HL1530
Page 14 of 25
3.2 Mechanical Color
The monitor has two colors for the bezel/housing design:
- Philips: Mushroom (40383); Pantone: Cool Gray 1M
- Philips: Ultra Dark Gray (10714); Pantone: Black 2M
3.3 Packaging
Figure 3.2( Carton)
Table 3.2
Carton Box
Width (mm) 447
Dimension
Gross weight 5Kg
Foam inserts illustration:
Figure 3.3 Front illustration(30°) Figure 3.4 Back illustration(30°)
Depth (mm) 180
Height (mm) 395
Last change:
2013-12-10
Copyright @ Shenyang
Torch-Bigtide Digital Tech.,Co.,Ltd
HL1530
Page 15 of 25
3.4 Texture
Texture of plastic parts shall be: VDI 3400 REF 30 (Supplier reference VDI3400 REF 22G allowed
as equivalent).
3.5 Label
3.5.1 Production Label
3.5.2 The col o r o f P r o d uct L ab el
The colors of the product label shall match:
Background: Matte silver
Manufacture
Serial Number
Figure 3.5
Philips 12NC number
Text: Black.
3.5.3 Packaging Label
Figure 3.6
Last change:
2013-12-10
Copyright @ Shenyang
Torch-Bigtide Digital Tech.,Co.,Ltd
HL1530
Page 16 of 25
3.5.4 Manufa c tu re Serial Nu m b er
The manufacture serial number consists of 14 characters (majuscule and numbers), format as below:
10287 13 3 1 10 001
Serial number
Top Version
PN （Pilot Number）
Month （1,2,3,4,5,6,7,8,9,A,B,C）
Year
The last figure of production number.
Notes: Month using hexadecimal, A, B, C substitute for October, November, December.
Example: HL1530 products machine Part Number 301010287, TOP version 1.0, in March 2013, the first batch,
the serial number of the first production is 10287133110001.
Manufacture serial number and Philips 12NC barcodes are Code 39.
3.6 Cleanability
The monitor shall be cleanable with the hospital used cleaning/disinfection fluids.
The list of liquids:
1 - Isopropanol 100%
2 - Ethanol 70%
3 - Chlorehexidine 0,5% in 70% Ethanol
4 - Haemosol 1% in 1 litre water
5 - Chlorine 250 ppm in 1 litre distilled water
6 - Artificial sweat (5% KCL, pH=3)
7 - Natriumchloride 0,9% (NaCL)
8 - Coffee with milk and sugar
9 - Iodine 1% in 70% Ethanol2
10 - Hexabrix 320
11- Chlorehexidine, red colored2
12- Chlorine 500 ppm in 1 litre distilled water2
Last change:
2013-12-10
Copyright @ Shenyang
Torch-Bigtide Digital Tech.,Co.,Ltd
HL1530
Page 17 of 25
4. ENVIRONMENT CONDITONS
4.1 Operation Environment（Philips XN-039059）
Table 4.1
Ambient temperature range
+10 -- +40°C
Ambient humidity 20%-80%
0.5°C/min
Temperature gradient
<
Atmospheric pressure range 70 – 110 kPa
4.2 Transport and Storage (Packed) （Philips XN-039059）
Table 4.2
Ambient temperature range -25 -- +70°C
Ambient humidity 5%-95%
Temperature gradient Max. 10°C/h, no condensation
Atmospheric pressure range 70 – 110 kPa
4.3 Mechanical Load
Operation （Philips XN-039137）
Table 4.3 Vibration
Test direction X-direction
(user position)
frequency range
cross-over frequency
acceleration 5g above the cross-over
displacement 0.7mm
sweep rate 1 octave/minute 1 octave/minute 1 octave/minute
initial sweep direction up up up
number of sweeps 10 10 10
10Hz - 150Hz
59.5Hz
frequency
peak-peak
cross-over frequency
up to the
Y-direction Z-direction
10Hz - 150Hz
57.5Hz
2g above the cross-over
frequency
0.3mm
peak-peak
cross-over frequency
up to the
10Hz - 150Hz
57.5Hz
2g above the cross-over
frequency
0.3mm
cross-over frequency
peak-peak
up to the
Operation （Philips XN-039136）
Table 4.4 Bump
Test direction X-direction
(user position)
Acceleration 25g 10g 10g
Pulse width 6 - 10 msec. 6 - 10 msec. 6 - 10 msec.
Number of bumps 4000 1000 1000
Y-direction Z-direction
Last change:
2013-12-10
Copyright @ Shenyang
Torch-Bigtide Digital Tech.,Co.,Ltd
HL1530
Page 18 of 25
4.4 Packed unit
According to 2M2 EN60721-3-2
5. REGULATION
5.1 Safety Specifications
Table 5.1
Safety standards
Approvals
Protection class class III
Degree of protection to
IEC 60529
Conformity CE
IEC60950-1、FCC Part 15 Class B、
CISPR 11 Group 1 Class B
FCC、CB (NCB Lab.)
IP21
5.2 Electromagnetic Compatibility
The unit shall comply with CISPR 11 Group 1 Class B - 3dB for conducted and radiated emission.
The unit shall be evaluated for immunity according IEC61000-4-6 against:
a) Normal performance within limits specified by the manufacturer, requester or purchaser; Section
9, meet level a) Specified as: "Normal operation of the monitor and touch panel should be
maintained during the emissions test."
5.3 RoHS Compliance
Comply with RoHS
6. MTBF & Warranty
Flat screen without Backlight: ＞60,000 operation hours.
The monitor life time: ≥20,000 hours (Brightness reduction to 50%)
Warranty items refer to related service contract.
7. DEFECT, SCRATCH and DUST
7.1 Environment condition
Room temperature: 20 ~ 25°C.
Humidity: 65±5% RH.
Illumination: Fluorescent light (Day-Light Type) display surface illumination to be 300 ~ 700 lux.
(standard 500 lux.)
To be a distance about 35 ± 5 cm in front of LCD unit, viewing line should be perpendicular to the
surface of the module judge the visual appearance with human’s eyes.
Take off the protector of polarizer while judging the display area.
If there is any question while judging, check the panel again while operating.
Last change:
2013-12-10
Copyright @ Shenyang
Torch-Bigtide Digital Tech.,Co.,Ltd
HL1530
Page 19 of 25
7.2 Dot Defect
Table 7.1
Defect pattern Condition Criteria
Line defect Display of black, white, red, green, blue 0 line
Red+Green+Blue ≤3 dots
Bright dots
Note2, Note3
Dark dots
Note2, Note4
Between Bright dots
and Dark dots
Total Bright dots + Dark dots ≤7 dots
Close defect dots
Note5
Linked defect dots
Note6
Red+Green+Blue ≤5 dots
Close defect dots
Note5
Linked defect dots
Note6
Linked defect dots
Note6
Close defect dots
Note5
0mm≤D≤15mm
Note7
D=0mm
Note7
0mm≤D≤15mm
Note7
D=0mm
Note7
D=0mm
Note7
0mm≤D≤15mm
Note7
2 defect dots
3 defect dots
or more
2 defect dots
3 defect dots
or more
2 defect dots
3 defect dots
or more
Same color and
different color
Same color 0 set
Different color ≤1 set
Same color and
different color
Same color and
different color
Same color and
different color
Same color and
different color
Same color and
different color
Same color and
different color
Same color and
different color
Allowed
Allowed
0 set
0 set
0 set
0 set
0 set
Note1: Inspection conditions are as follows.
Table 7.2
Temperature
Inspection viewing distance 20cm (The distance between the inspector’s eye and screen.)
Inspection direction
Inspection illumination 60lx(at a display surface)
Note2: Regardless of bright or intermittent bright, 1/3 or more defects of a dot area is counted as the defect
dot.
Note3: Bright dots are counted while the display is black.
Note4: Dark dots are counted which the display is illuminated with Red, Green or Blue.
Note5: See “7.2.1 Close defect dots”.
Note6: See “7.2.2 Linked defect dots”.
Note7: D is the distance between defect dots.
0°≤θR≤20°, 0°≤θL≤20°
25±5℃
0°≤θU≤20°
Last change:
2013-12-10
Copyright @ Shenyang
Torch-Bigtide Digital Tech.,Co.,Ltd
HL1530
Page 20 of 25
7.2.1 Close defect dots
7.2.2 Linked defect dots
Last change:
2013-12-10
Copyright @ Shenyang
Torch-Bigtide Digital Tech.,Co.,Ltd
HL1530
Page 21 of 25
Last change:
2013-12-10
Copyright @ Shenyang
Torch-Bigtide Digital Tech.,Co.,Ltd
HL1530
Page 22 of 25
7.2.3 Appearance specification
Table 7.3
Defect pattern Condition Criteria
0.2mm ≤d<0.3mm
0.3mm ≤d≤0.5mm ≤3 points
W<0.05mm
W>0.1mm
0.2mm ≤d≤0.5mm ≤2 points
Impure ingredient
Stains
Dust
Bubbles, Wrinkles, Dent
Dot shape
Line shape
0.05mm ≤W≤0.1mm
d<0.2mm
d>0.5mm
0.7mm ≤L≤1.0mm ≤4 points
d<0.2mm
d>0.5mm
L<0.7mm
L>1.0mm
Allowed
≤10 points
0 point
Allowed
0 point
Allowed
0 point
S≤0.2mm2
Scratch(Surface of polarizer)
S>0.2mm2
Note1: Definition of symbols is as follows.
d: Average diameter
(This diameter is the average length of a long axis and a short axis in each defect pattern.)
W: Width, L: Length, S: Area
Note2: Inspection conditions are as follows.
Table 7.4
Temperature
Inspection viewing distance 20cm (The distance between the inspector’s eye and screen.)
Inspection direction
Illumination 700lx(at an inspection desk surface)
0°≤θR≤45°, 0°≤θL≤45°
0°≤θU≤45°, 0°≤θD≤45°
25±5℃
Allowed
0 point
Last change:
2013-12-10
Copyright @ Shenyang
Torch-Bigtide Digital Tech.,Co.,Ltd
HL1530
Page 23 of 25
8. Cosmetic Specifications and Acceptance Criteria Summary
(Touch Panel)
Spots, Dots or Bubbles, (circular blemishes and defects) – TP viewable area >10"
Diameter (mm) Accept Quantity
Diameter ≤ 0.35 mm Disregard or ignore /
0.35 mm < Diameter ≤ 0.50 mm Quantity ≤ 5 5mm
0.50 mm < Diameter ≤ 0.80 mm Quantity ≤ 2 20mm
Diameter > 0.8 mm Quantity = 0 /
Lines, Linear Fibers or Scratches in viewable area
Width (mm)
Max. Length (mm)
And Accept Quantity
W ≤ 0.04 Disregard or ignore /
0.04 < W ≤ 0.08 mm L ≤ 20 mm, Quantity ≤ 5 20mm
0.08 < W ≤ 0.10 mm L ≤ 5 mm, Quantity ≤ 1 /
W > 0.1 Refer to circular blemish criteria.
Note 1: Defects must be found at Incoming Quality Control (IQC), prior to non-Ocular cover glass
(faceplate) or TFT display bonding, or before final manufacturing assembly.
Minimum Distance
Between blemishes
Minimum Distance
Between blemishes
Note 2: Bubbles or contamination outside the viewing area are acceptable. These anomalies do not impact
functionality, performance or long term reliability.
Note 3: If a surface blemish or defect can be wiped off, removed by cleaning or blown away using a
compressed air gun, the touch panel is acceptable.
Note 4: Blemishes or defects on the touch panel back side that are not visible from the front are acceptable.
These anomalies do not impact functionality, performance or long term reliability.
Note 5: Glass chips that do not impact functionality, performance or long term reliability and only observed
from the back side are acceptable.
Note 6: Glass cracks or fractures are not acceptable. This is a defect.
Last change:
2013-12-10
Copyright @ Shenyang
Torch-Bigtide Digital Tech.,Co.,Ltd
HL1530
Page 24 of 25
Last change:
2013-12-10
Copyright @ Shenyang
Torch-Bigtide Digital Tech.,Co.,Ltd
HL1530
Page 25 of 25
Loading...