User Manual
15.3 Inch Color LCD Display
Model: HL1530
Last change:
2012-9-10
Copyright @ Shenyang
Torch-Bigtide Digital Tech.,Co.,Ltd
HL1530
Page 1 of 23
CONTENTS
1. SCOPE.................................................................................................................................................. 4
2. ELECTRICAL PERFORMANCE ...................................................................................................... 6
2.1 Power Supply ................................................................................................................................................6
2.2 Power Management......................................................................................................................................6
2.3 Interface.........................................................................................................................................................6
2.3.1 Signal Specifications................................................................................................................................................6
2.3.2 HDMI connector.......................................................................................................................................................8
2.3.3 USB Interface...........................................................................................................................................................8
2.4 Panel Features...............................................................................................................................................9
2.5 Display Performance....................................................................................................................................9
2.5.1 Standard Testing Conditions.....................................................................................................................................9
2.5.2 Brightness (TBD)...................................................................................................................................................10
2.5.3 V iew angle..............................................................................................................................................................10
2.5.4 Brightness Uniformity............................................................................................................................................10
2.5.5 Contrast ratio..........................................................................................................................................................10
2.5.6 White Color Coordinates (TBD) ............................................................................................................................10
2.5.7 Response Time .......................................................................................................................................................10
2.5.8 Color Gray..............................................................................................................................................................10
2.6 Touch screen Performance ........................................................................................................................10
2.6.1 Features..................................................................................................................................................................10
2.6.2 General Specification.............................................................................................................................................10
2.6.3 Environmental Characteristics................................................................................................................................11
2.6.4 Optical Characteristics............................................................................................................................................11
2.6.5 Electrical Characteristics........................................................................................................................................11
3. MECHANICAL SPECIFICATIONS................................................................................................ 14
3.1 Outline Dimensions & Weight...................................................................................................................14
3.2 Screen Quality.............................................................................................................................................15
3.2.1 H/V Outline Position..............................................................................................................................................15
3.2.2 Outline Edge Position............................................................................................................................................. 15
3.2.3 Structure Width Position.........................................................................................................................................15
3.3 Packaging ....................................................................................................................................................16
4. ENVIRONMENT CONDITONS....................................................................................................... 16
4.1 Operation Environment（UXN-039059） ...............................................................................................16
4.2 Transport and Storage (Packed)...............................................................................................................17
4.3 Mechanical Load.........................................................................................................................................17
5. REGULATION................................................................................................................................... 17
5.1 Safety Specifications...................................................................................................................................17
5.2 Electromagnetic Compatibility..................................................................................................................18
5.3 Rohs Compliance........................................................................................................................................18
6. MTBF & Warranty............................................................................................................................. 18
7. DEFECT, SCRATCH and DUST...................................................................................................... 18
Last change:
2012-9-10
Copyright @ Shenyang
Torch-Bigtide Digital Tech.,Co.,Ltd
HL1530
Page 2 of 23
7.1 Environment condition...............................................................................................................................18
7.2 Dot Defect....................................................................................................................................................19
Last change:
2012-9-10
Copyright @ Shenyang
Torch-Bigtide Digital Tech.,Co.,Ltd
HL1530
Page 3 of 23
1. SCOPE
This document defines the performance requirements for a 15.3-inch TFT LCD color monitor with touch
screen for medical use. This product is controlled by model name; any change will be recorded in the list
and confirmed by customer.
This high-resolution color display is specifically designed to meet the rigorous performance standards
needed for surgery. To guarantee image integrity, features include accurate signal conversion.
Last change:
2013-3-20
Copyright @ Shenyang
Torch-Bigtide Digital Tech.,Co.,Ltd
HL1530
Page 4 of 23
Abbreviations
The following abbreviations are used in this document:
Acronym Definition
AC Alternating Current
AI Assembly Instruction
ATE Automated Test Equipment
BIST Built In Self Test
BLS Backlight Stabilization
CCC China Compulsory Certification
CR Contrast Ratio
DC Direct Current
DDC Display Data Channel
EDID Extended Display Identification Data
EEPROM Electrically Erasable Programmable Read only Memory
ESD Electric Static Discharge
GND Ground
HDMI High Definition Multimedia Interface
I2C IC to IC Communication
LCD Liquid Crystal Display
LED Light Emitting Diode
MTBF Mean Time Between Failures
PCAP Projective Capacitive
P/N Part Number
USB Univ ersal Serial Bus
VESA Video Electronics Standards Association
WXGA Wide Extended Graphics Array, a standard resolution
Last change:
2013-3-20
Copyright @ Shenyang
Torch-Bigtide Digital Tech.,Co.,Ltd
HL1530
Page 5 of 23
2. ELECTRICAL PERFORMANCE
2.1 Power Supply
Tab. 2 .1
-Input Voltage : DC12V ± 10%
- Current (max) : 3.0 A
- Frequency : 50/60Hz ± 3Hz
- Power Consumption : <30W
2.2 Power Management
The following table shows the power consumption feature:
Tab. 2.2
VESA Modes
Normal operation Active Active Active Green Less than 30 W
Active-off mode Inactive Inactive Blanked
While there is no sync the monitor power indicator LED will be in green blinking status.
Horizontal
Sync
Vertical Sync Video
Power
Indicator
Green
blinking
Power Consumption
Less than 15W
2.3 Interface
USB (Type A) USB (Type B) HDMI DC Power LED
PE
2.3.1 Signal Specifications
HDMI Port
Last change:
2013-3-20
Torch-Bigtide Digital Tech.,Co.,Ltd
Fig. 2.1
Tab. 2 .3
Item SPEC
HDMI single link Input Impedance: 50 ohm
Copyright @ Shenyang
HL1530
Page 6 of 23
HDMI EDID datum EDID via HDMI I²C bus
DigitaL (HDMI) EDID
Week, year
00 FF FF FF FF FF FF 00 0A 84 16 19 01 00 00 00
32 13 01 03 81 26 1E 78 2E AE A5 A6 54 4C 99 26
14 50 54 BF EF 80 81 80 01 01 01 01 01 01 01 01
01 01 01 01 01 01 30 2A 00 98 51 00 2A 40 30 70
13 00 78 2C 11 00 00 1E 00 00 00 FD 00 38 4B 1E
51 0E 00 0A 20 20 20 20 20 20 00 00 00 FC 00 48
4c 31 39 31 36 56 0a 20 20 20 20 20 00 00 00 10
00 00 3D 40 00 C0 03 00 78 2C 11 00 00 1E 00 F6
Serial number
Note: the datum above for reference only. Serial number, week and year will be changed according to
manufacture order.
Manufacture Serial Number
Serial Number
The manufacture serial number consists of 14 characters (majuscule and numbers), format as below:
10287 12 9 1 10 001
Serial number
Top Version
Pilot Number
Month （1,2,3,4,5,6,7,8,9,A,B,C）
Year
The last figure of production number.
Notes: Month using hexadecimal, A, B, C substitute for October, November, December.
Example: HL1530 products machine Part Number301010287, TOP version 1.0, in March 2013, the
first batch , the serial number of the first production is 10287133110001.
Last change:
2013-3-20
Copyright @ Shenyang
Torch-Bigtide Digital Tech.,Co.,Ltd
HL1530
Page 7 of 23
2.3.2 HDMI connector
Pin - Assignment of 19-pin HDMI Female Connector
Pin 1 - TMDS Data2+ Pin 8 - TMDS Data0 Shield Pin 15 - SCL
Pin 2 - TMDS Data2 Shield Pin 9 - TMDS Data0– Pin 16 - SDA
Fig. 2.2 HDMI connector
Tab. 2.4
Pin 3 - TMDS Data2– Pin 10 - TMDS Clock+ Pin 17 - DDC/CEC Ground
Pin 4 - TMDS Data1+ Pin 11 – TMDS Clock Shield Pin 18 - +5V Power
Pin 5 - TMDS Data1 Shield Pin 12 - TMDS Clock– Pin 19 - Hot Plug Detect
Pin 6 - TMDS Data1– Pin 13 - CEC
Pin 7 - TMDS Data0+ Pin 14 - Reserved (N.C. on device)
2.3.3 USB Interface
The monitor supports touch function, the touch screen can be used in the Microsoft® Windows 7.
Fig.2.3 USB-A connector
Last change:
2013-3-20
Fig.2.4 USB-B connector
Copyright @ Shenyang
Torch-Bigtide Digital Tech.,Co.,Ltd
HL1530
Page 8 of 23
Tab. 2.5
Pin Signal
1 VBUS
2 D-
3 D+
4 GND
USB A-Type
Used for external USB function, such as a USB mouse, flash disk.
USB B-Type
Used for Touch panel control.
2.4 Panel Features
Tab. 2.6
Panel Module NLT12876BC26-32D
Size 15.3” (39 cm diagonal)
Aspect Ratio 15:9(W:H)
Active Display Area 334.08 (H) x 200.45 (V) mm
Resolution 1280(H)x 768 (V)pixels
Pixel Pitch 0.261(H) x 0.261(V) mm
Color Depth 16.7M (At 8-bit input, FRC terminal =Low or Open)
Back Light LED
Surface treatment Anti-Glare treatment
2.5 Display Performance
2.5.1 Standard Testing Conditions
- Warm up time
- DC supply voltage 12V DC, 60Hz
- Ambient temperature 20°C -25°C
Tab. 2 .7
＞20 minutes.
- Relative Humidity 30% --80%
- Video signal 1280 x 768 @ 60Hz; HDMI
- Ambient Environment Dark
- LUT Setting TBD
- Luminance meter Minolta CA-210 or equivalent
Last change:
2013-3-20
Copyright @ Shenyang
Torch-Bigtide Digital Tech.,Co.,Ltd
HL1530
Page 9 of 23
2.5.2 Brightness (TBD)
2.5.3 View angle
Left/Right: 88/88 degree (Typ.); 80/80 degree (Min.) (CR≥10) (Note 2)
Up/Down: 88/88 degree (Typ.)/; 80/80 degree (Min.) (CR≥10) (Note 2)
2.5.4 Brightness Uniformity
Deviation less than 30% (Note 5)
2.5.5 Contrast ratio
700:1 (Typ.) (note 3)
500:1 (Min.)
2.5.6 White Color Coordinates (TBD)
2.5.7 Response Time
Typical (Tr+Td): 14+11ms (Note 6)
Max. (Tr+Td): 20+15ms (Note 6)
2.5.8 Color Gray
64 gray level should seen clearly
256 gray levels should be seen smoothly
2.6 Touch screen Performance
2.6.1 Features
Tab. 2 .8
Item Specification
Type P-CAP
Input Mode Finger
Cable
2.6.2 General Specification
Last change:
2013-3-20
Copyright @ Shenyang
Torch-Bigtide Digital Tech.,Co.,Ltd
FCC
Tab. 2 .9
HL1530
Page 10 of 23
Item Specification
Frame Size 385.08mm X251.45 mm
Tolerance [-0.4,0]
Active Area 334.08 X200.45mm
Total Thickness 3.20±0.50 mm
2.6.3 Environmental Characteristics
Tab. 2.10
Item
Specification
Temperature Humidity (Non Condensing)
Operation -30°C ~ +70°C 20%RH ~ 90%RH
Active Area -30°C ~ +80°C 10%RH ~ 90%RH
2.6.4 Optical Characteristics
Tab. 2 .11
Item Specification
Transmissivity
≥90%
2.6.5 Electrical Characteristics
Tab. 2.12
Parameter Min Typ. Max Units Remarks
Digital Power Supply (VDD) 3.6 5.0 5.5 V
Active Current ─ 30 ─ mA Note 1
Sleep Current ─ 5 ─ μA
Accuracy ±1.5
Resolution
─
─
─ ─
─
─
4096
4096
%
─
─
X (long axis)
Y (short axis)
Note : Active power varies based on a number of controllable parameters as well as the number of touches
per second.
Note1: Test Equipment Setup
The measurement should be executed in a stable, windless and dark room between 20 minutes after the
Last change:
2013-3-20
Copyright @ Shenyang
Torch-Bigtide Digital Tech.,Co.,Ltd
HL1530
Page 11 of 23
backlight at the given temperature for stabilization of the backlight. This should be measured in the center of
screen. Test equipment should be equivalent with the following equipment.
Environment condition: Ta=25 ± 2ºC
Note2: Viewing angle is measured as follow:
Note 3: Definition of contrast Ratio (CR):
Ratio of gray max (Gmax) & gray min (Gmin) at the center point of the panel.
Gmax: Luminance with all pixels white
Gmin: Luminance with all pixels black
Note 4: Definition of Luminance of White: Luminance of white at center point.
Last change:
2013-3-20
Copyright @ Shenyang
Torch-Bigtide Digital Tech.,Co.,Ltd
HL1530
Page 12 of 23
Note 5: Definition of brightness uniformity
The luminance uniformity is calculated by using following formula.
Non-Luminance(LU)=1-
Note 6: Definition of response time is as follows:
Response time is measured at the time when the luminance changes from “black” to “white”, or
“white” to “black” on the same screen point, by photo-detector. Ton is the time when the luminance
changes from 10% up to 90%. Also Toff is the time when the luminance changes from 90% down to
10%(See the following diagram.).
When the display data is changed from white to black, response time is measured
Last change:
2013-3-20
Copyright @ Shenyang
Torch-Bigtide Digital Tech.,Co.,Ltd
HL1530
Page 13 of 23
3. MECHANICAL SPECIFICATIONS
3.1 Outline Dimensions & Weight
Fig. 3.1
Tab. 3.1
Item Set
Width 390.08mm
Housing components Plastic
Visible screen surface Approx. 334.08 (H) x 200.45 (V) mm
Degree of protection IP21
Connection panel At rear VESA 75 x 75 mm
Net weight TBD
Depth 256.45mm
Height 55.4 mm
Last change:
2013-3-20
Copyright @ Shenyang
Torch-Bigtide Digital Tech.,Co.,Ltd
HL1530
Page 14 of 23
3.2 Screen Quality
3.2.1 H/V Outline Position
Fig. 3.2
3.2.2 Outline Edge Position
Fig. 3.3
3.2.3 Structure Width Position
Last change:
2013-3-20
Torch-Bigtide Digital Tech.,Co.,Ltd
Copyright @ Shenyang
Fig. 3.4
HL1530
Page 15 of 23
3.3 Packaging
Fig. 3.5
Tab. 3.2
Width (mm) 447
Gross weight TBD
Depth (mm) 180
Height (mm) 395
4. ENVIRONMENT CONDITONS
4.1 Operation Environment（UXN-039059）
Ambient temperature range +10 -- +35℃
Last change:
2013-3-20
Copyright @ Shenyang
Torch-Bigtide Digital Tech.,Co.,Ltd
Carton Box
Tab. 4.1
HL1530
Page 16 of 23
Ambient humidity 20%-80%
Temperature gradient
< 0.5°C/min
Atmospheric pressure range 70 – 110 kPa
4.2 Transport and Storage (Packed)
Tab. 4.2
Ambient temperature range -10 -- +40℃
Ambient humidity 10%-90%
Temperature gradient Max. 10℃/h, no condensation
Atmospheric pressure range 70 – 106 kPa
4.3 Mechanical Load
Operation （UXN-13600 Class M2）
Tab. 4.3 Vibration
Test direction X-direction
(user position)
frequency range
cross-over frequency
acceleration 5g above the cross-over
displacement 0.7mm
sweep rate 1 octave/minute 1 octave/minute 1 octave/minute
initial sweep direction up up up
number of sweeps 10 10 10
10Hz - 150Hz
59.5Hz
frequency
cross-over frequency
peak-peak
up to the
Test direction X-direction
(user position)
Acceleration 25g 10g 10g
Pulse width 6 - 10 msec. 6 - 10 msec. 6 - 10 msec.
Number of bumps 4000 1000 1000
Packed unit:
According to 2M2 EN60721-3-2
Y-direction Z-direction
10Hz - 150Hz
57.5Hz
2g above the cross-over
frequency
0.3mm
cross-over frequency
peak-peak
up to the
10Hz - 150Hz
57.5Hz
2g above the cross-over
frequency
0.3mm
cross-over frequency
peak-peak
up to the
Tab. 4.4 Bump
Y-direction Z-direction
5. REGULATION
5.1 Safety Specifications
Safety standards
Approvals
Protection class class III
Last change:
2013-3-20
Torch-Bigtide Digital Tech.,Co.,Ltd
Copyright @ Shenyang
Tab. 5 .1
IEC60950-1、FCC Part 15 Class B、
CISPR 11 Group 1 Class B
FCC、CB (NCB Lab.)
HL1530
Page 17 of 23
Degree of protection to
IEC 60529
Conformity CE
IP21
5.2 Electromagnetic Compatibility
The unit shall comply with CISPR 11 Group 1 Class B - 3dB for conducted and radiated emission.
TM.Appr.EMC
The unit shall comply with CISPR 11 Group 1 Class B - 3dB for conducted and radiated emission.
TM.Appr.Certification
The monitor shall be certified to the following regulations:
- IEC60950-1
- FCC
- CE
5.3 Rohs Compliance
Comply with RoHs
6. MTBF & Warranty
Flat screen without Backlight: ＞70,000 operation hours.
Minimum backlight life time: ≥20,000 hours (Brightness reduction to 50%)
Warranty items refer to related service contract.
7. DEFECT, SCRATCH and DUST
7.1 Environment condition
Room temperature: 20 ~ 25 C.
Humidity: 65±5% RH.
Illumination: Fluorescent light (Day-Light Type) display surface illumination to be 300 ~ 700 lux.
(standard 500 lux.)
To be a distance about 35 ± 5 cm in front of LCD unit, viewing line should be perpendicular to the
surface of the module judge the visual appearance with human’s eyes.
Take off the protector of polarizer while judging the display area.
If there is any question while judging, check the panel again while operating.
Last change:
2013-3-20
Copyright @ Shenyang
Torch-Bigtide Digital Tech.,Co.,Ltd
HL1530
Page 18 of 23
7.2 Dot Defect
Tab. 7.1
Defect pattern Condition Criteria
Line defect Display of black, white, red, green, blue 0 line
Red+Green+Blue ≤3 dots
Bright dots
Note2, Note3
Dark dots
Note2, Note4
Between Bright dots
and Dark dots
Total Bright dots + Dark dots ≤7 dots
Close defect dots
Note5
Linked defect dots
Note6
Red+Green+Blue ≤5 dots
Close defect dots
Note5
Linked defect dots
Note6
Linked defect dots
Note6
Close defect dots
Note5
0mm≤D≤15mm
Note7
D=0mm
Note7
0mm≤D≤15mm
Note7
D=0mm
Note7
D=0mm
Note7
0mm≤D≤15mm
Note7
2 defect dots
3 defect dots
or more
2 defect dots
3 defect dots
or more
2 defect dots
3 defect dots
or more
Same color and
different color
Same color 0 set
Different color ≤1 set
Same color and
different color
Same color and
different color
Same color and
different color
Same color and
different color
Same color and
different color
Same color and
different color
Same color and
different color
Allowed
Allowed
0 set
0 set
0 set
0 set
0 set
Note1: Inspection conditions are as follows.
Tab. 7 .2
Temperature
Inspection viewing distance 20cm (The distance between the inspector’s eye and screen.)
Inspection direction
Inspection illumination 60lx(at a display surface)
Note2: Regardless of bright or intermittent bright, 1/3 or more defects of a dot area is counted as the defect
dot.
Note3: Bright dots are counted while the display is black.
Note4: Dark dots are counted which the display is illuminated with Red, Green or Blue.
Note5: See “7.2.1 Close defect dots”.
Note6: See “7.2.2 Linked defect dots”.
Note7: D is the distance between defect dots.
0°≤θR≤20°, 0°≤θL≤20°
25±5℃
0°≤θU≤20°
Last change:
2013-3-20
Copyright @ Shenyang
Torch-Bigtide Digital Tech.,Co.,Ltd
HL1530
Page 19 of 23
7.2.1 Close defect dots
7.2.2 Linked defect dots
Last change:
2013-3-20
Copyright @ Shenyang
Torch-Bigtide Digital Tech.,Co.,Ltd
HL1530
Page 20 of 23
Last change:
2013-3-20
Copyright @ Shenyang
Torch-Bigtide Digital Tech.,Co.,Ltd
HL1530
Page 21 of 23
7.2.3 Appearance specification
Tab. 7.3
Defect pattern Condition Criteria
0.2mm ≤d<0.3mm
0.3mm ≤d≤0.5mm ≤3 points
0.2mm ≤d≤0.5mm ≤2 points
Impure ingredient
Stains
Dust
Bubbles, Wrinkles, Dent
Dot shape
Line shape
0.05mm ≤W≤0.1mm
d<0.2mm
d>0.5mm
W<0.05mm
0.7mm ≤L≤1.0mm ≤4 points
W>0.1mm
d<0.2mm
d>0.5mm
L<0.7mm
L>1.0mm
Allowed
≤10 points
0 point
Allowed
0 point
Allowed
0 point
S≤0.2mm2
Scratch(Surface of polarizer)
S>0.2mm2
Note1: Definition of symbols is as follows.
d : Average diameter
(This diameter is the average length of a long axis and a short axis in each defect pattern.)
W: Width, L: Length, S: Area
Note2: Inspection conditions are as follows.
Temperature
Inspection viewing distance 20cm (The distance between the inspector’s eye and screen.)
Inspection direction
Illumination 700lx(at an inspection desk surface)
0°≤θR≤45°, 0°≤θL≤45°
0°≤θU≤45°, 0°≤θD≤45°
25±5℃
Allowed
0 point
8. Cosmetic Specifications and Acceptance Criteria Summary
(Touch Panel)
Spots, Dots or Bubbles, (circular blemishes and defects), in the viewable area
Diameter < 0.35 mm, Disregard or ignore
0.35 mm < Diameter < 0.50 mm, Quantity < 5
0.50 mm < Diameter < 0.80 mm, Quantity < 2
Last change:
2013-3-20
Copyright @ Shenyang
Torch-Bigtide Digital Tech.,Co.,Ltd
HL1530
Page 22 of 23
Diameter > 0.8 mm, Quantity = 0
Lines, Linear Fibers or Scratches in the viewable area
Width < 0.02 mm, Disregard or ignore
0.02 mm < Width < 0.04 mm, Length < 20 mm Min. distance between blemishes: 10 mm
0.04 mm < Width < 0.08 mm, Length < 5 mm Quantity < 2, min. distance between: 20 mm
0.08 mm < Width < 0.10 mm, Length < 2 mm Quantity < 1
Width > 0.1 mm, Refer to circular blemish criteria: (a+b) / 2
Note 1: Bubbles or contamination outside the viewing area are considered acceptable.
Note 2: If a blemish can be wiped off or blown away using a compressed air gun, the touch panel is
considered acceptable.
Note 3: Defects described above should be found at IQC (Incoming Quality Control), or prior to TFT display
bonding or completed manufacturing assembly.
Note 4: Glass chips that do not impact functionality and only observed from the back side are considered
acceptable.
Note 5: Glass cracks or fractures are not acceptable.
FCC Statement:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
Last change:
2013-3-20
Copyright @ Shenyang
Torch-Bigtide Digital Tech.,Co.,Ltd
HL1530
Page 23 of 23
Loading...