30' x 30' UltraMax Peak Canopy
Assembly Instructions
DESCRIPTION MODEL #
30 x 30 UltraMax™ Peak Canopy 27772
RECOMMENDED TOOLS
Please read instructions COMPLETELY before assembly. This shelter MUST be securely anchored.
THIS IS A TEMPORARY STRUCTURE AND NOT RECOMMENDED AS A PERMANENT STRUCTURE.
Before you start: 2+ individual recommended for assembly, approximate time 2 hr.
150 Callender Road
Watertown, CT 06795
www.shelterlogic.com
6/28/10
1-800-524-9970
Canada:
1-800-559-6175
05-27772-OCPage 1
ATTENTION:
This shelter product is manufactured with quality materials. It is designed to t the ShelterLogic
ShelterLogic
Please anchor this ShelterLogic
®
, LLC Shelters offer storage and protection from damage caused by sun, light rain, tree sap and animal - bird excrement.
®
, LLC structure properly. See manual for more anchoring details. Proper anchoring, keeping cover
tight and free of snow and debris is the responsibility of the consumer. This shelter is not recommended for severe weather conditions.
Please read and understand the installation detail, warnings and cautions prior to beginning installation. If you have any questions call
the customer service number listed below. Please refer to the warranty card inside this package.
®
, LLC custom fabric cover included.
DANGER:
Prior to installation, consult with all local municipal codes regarding installation of temporary shelters.
Choose the location of your shelter carefully. DANGER: Keep away from electrical wires. Check for
overhead utility lines, tree branches or other structures. Check for underground pipes or wires before
you dig. DO NOT install near roof lines or other structures that could shed debris onto your shelter.
DO NOT hang objects from the roof or support cables.
WARNING:
Risk of re. DO NOT smoke or use open ame devices (including grills, re pits, deep fryers, smokers or
lanterns) in or around the shelter. DO NOT store ammable liquids (gasoline, kerosene, propane, etc.) in
or around your shelter. Do not expose top or sides of the shelter to open re or other ame source.
CAUTION:
Use CAUTION when erecting the frame. Use safety goggles during installation. Secure and bolt together
overhead poles during assembly. Beware of pole ends.
PROPER ANCHORING AND INSTALLATION OF FRAME:
PROPER ANCHORING OF THE FRAME IS THE RESPONSIBILITY OF THE CONSUMER.
ShelterLogic
securely has the potential to y away causing damage, and is not covered under the warranty. Periodically check the anchors to ensure
stability of shelter. ShelterLogic
quickly removed and stored prior to severe weather conditions. If strong winds or severe weather is forecast in your area, we recommend removal of cover.
®
, LLC
is not responsible for damage to the unit or the contents from acts of nature. Any shelter that is not anchored
®
, LLC cannot be responsible for any shelter that blows away. NOTE: Your shelter’s cover can be
REPLACEMENT PARTS, ASSEMBLY, SPECIAL ORDERS:
Genuine ShelterLogic
application, replacement covers, wall and enclosure kits, vent and light kits, frame parts, zippered doors and other accessories. All
items are shipped factory direct to your door.
QUESTIONS - CLAIMS - SPECIAL ORDERS? CALL OUR CUSTOMER SERVICE HOTLINE:
U.S. CUSTOMER SERVICE: 1-800-524-9970 INTERNATIONAL CUSTOMER SERVICE: 001-860-945-6442 CANADA CUSTOMER SERVICE: 1-800-559-6175
HOURS OF OPERATION: MON-FRI 8:30AM-8:00PM EST, SAT-SUN 8:30AM-5:00PM EST.
®
, LLC replacement parts and accessories are available from the factory, including anchoring kits for nearly any
CARE AND CLEANING:
A tight cover ensures longer life and performance. Always maintain a tight cover. Loose fabric can accelerate deterioration of cover fabric. Immediately remove any accumulated debris from the roof structure with a
broom, mop or other soft-sided instrument. Use extreme caution when removing debris from cover- always
remove from outside the structure. DO NOT use hard-edged tools or instruments like rakes or shovels to
remove debris. This could result in punctures to the cover. DO NOT use bleach or harsh abrasive products to
clean the fabric cover. Cover is easily cleaned with mild soap and water.
WARRANTY:
This shelter carries a full limited warranty against defects in workmanship. ShelterLogic
properly used and installed, the product and all associated parts, are free from manufacturer’s defects for a period of:
1 YEAR FOR COVER FABRIC, END PANELS AND FRAMEWORK
Warranty period is determined by date of shipment from ShelterLogic®, LLC for factory direct purchases or date of purchase from an authorized
reseller, (please save a copy of your purchase receipt). If this product or any associated parts are found to be defective or missing at the time of receipt,
ShelterLogic
shall be covered for the remainder of the Original Limited Warranty Period. All shipping costs will be the responsibility of the customer. Parts and replacements will be sent C.O.D. You must save the original packaging materials for shipment back. If you purchased from a local dealer, all claims must have a
copy of original receipt. After purchase, please ll out and return warranty card for product registration. Please see warranty card for more details.
®
, LLC will repair or replace, at it’s option, the defective parts at no charge to the original purchaser. Replacement parts or repaired parts
®
, LLC warrants to the Original Purchaser that if
Covered by U.S. Patents and patents pending: 6,871,614; 6,994,099; 7,296,584; D 430,306; D 415,571; D 414,564; D 409,310; D 415,572
05-27772-OCPage 2
30'x 30' ULTRA MAX PEAK CANOPY Model #27772
Part Part #QuantityDescription
Support Tube 72 3/8" 4
Common Tube 72 3/8"
Oblique Tube 72 3/8"
Extend Tube 42 5/32"
Cross Rail 69"
Pocket Pipe 69 5/32"
(Top Bend, Shallow Bend)
3-Way Frame Connectors
4-Way Frame Connectors
(Side Bend, Sharp Bend)
3-Way Frame Connectors
4-Way Frame Connectors
Wind Brace (Swedged Ends)
Wind Brace (Flat Ends)
Cover
20
12
12
15
10
800216
800095
800096
800090
800097
800226
2
4
4
8
6
6
1
800091
800093
800092
800094
800104
800103
800227
4-Way Cover Rail Clamp
3-Way Cover Rail Clamp
Heavy-Duty Stake Anchors
Ropes
Base Feet
5/16" x 2 1/4" Bolts
5/16" x 2" Round Head Bolts
5/16" x 3" Round Head Bolts
5/16" Nuts
Spike Anchor
Ratchet
16
8
16 800140
16 10437
12
20
36
72
128
48
4
800221
800220
800105
11130
800217
800218
00690
10431
10040
White Rope
Rope Bead
"S" Hook
2
4
4
800229
10465
800225
05-27772-OCPage 3
Frame Basic Overview
05-27772-OCPage 4
800216
800095
800095
800094
800096
800090
800093
#800218(5/16"x3"Bolt)
800095
800092
800096
800090
800091
#800218(5/16"x3"Bolt)
Basic Frame Assembly
Step 1
Assemble the wind brace set as shown in Figure 1.
Step 2
See Figure 2A.
Fit together the end rib using the following parts
(1) #800091 3-Way Top Connectors
(2) #800096 Rafter Poles
(2) #800090 Extend tube
(2) #800095 Common Tubes
(2) #800092 3-Way Side Connectors
(1) Wind Brace set
Fig 2B:
Fit together the middle rib using the following parts
(1) #800093 4-Way Top Connectors
(2) #800096 Rafter Poles
(2) #800090 Extend Tube
(2) #800095 Common Tubes
(2) #800094 4-Way Side Connectors
(1) Wind Brace set
Using (8) #800218 (5/16" x3" Bolts) and (8) Nuts
securely fasten these tubes. Lay these ribs on the
ground at the rear of your shelters designated location.
Fig. 1
Fig. 2A:
2 End Ribs
Fig. 2B:
Middle Ribs
#800103
#800217
#800104
#00690
Wind Brace
Wind Brace
NOTE: Be sure that all of the heads of the bolts are
facing toward the outside of the rib.
Repeat step 2A/2B for all the other ribs.
800097
Fig. 3
Step 3
Using #800097 Cross Rails, #800217
(5/16" x 2" Bolts) and Nuts to connect
these ribs. See Figure 3
Step 4
Assemble (2) #800216 Corner Support Tubes and (4) # 800095 middle support tube as shown in Fig. 4A and
set aside. Assemble other side Support Tubes as shown in Fig. 4B and connect the middle support tubes with
#800218 (5/16" x 3"Bolts) and nuts. Repeat this step at opposite side.
Note: #800218 Bolts are required for middle support tube connections. Bolts are not inserted to the
corner legs (#800216) at this step.
Fig. 4B
Fig. 4A
800216
800095
05-27772-OCPage 5
Loading...