Organic Growers Greenhouse
Assembly Manual
™
DESCRIPTION MODEL #
6' x 8' x 6'6" Organic Growers Greenhouse
™
70641
RECOMMENDED TOOLS
7/16"
mm
18"
+
/
-
45 cm
Please read instructions COMPLETELY before assembly. This shelter MUST be securely anchored.
THIS IS A TEMPORARY STRUCTURE AND NOT RECOMMENDED AS A PERMANENT STRUCTURE.
Before you start: 1 or more individuals recommended for assembly, approximate time 1 1/2 hours.
11
150 Callender Road
Watertown, CT 06795
www.shelterlogic.com
8/16/12
1-800-524-9970
Canada:
1-800-559-6175
05_70641_B2Page 1
ATTENTION:
This greenhouse product is manufactured with quality materials. It is designed to t the ShelterLogic
included. ShelterLogic
excrement and light snow. Please anchor this ShelterLogic
®
Corp. Shelters offer storage and protection from damage caused by sun, light rain, tree sap, animal - bird
®
Corp. structure properly. See manual for more anchoring details. Proper
anchoring, keeping cover tight and free of snow and debris is the responsibility of the consumer. Please read and understand the
installation detail, warnings and cautions prior to beginning installation. If you have any questions call the customer service number
listed below. Please refer to the warranty card inside this package.
®
Corp. custom fabric cover
DANGER:
Prior to installation, consult with all local municipal codes regarding installation of temporary shelters.
Choose the location of your shelter carefully. DANGER: Keep away from electrical wires. Check for
overhead utility lines, tree branches or other structures. Check for underground pipes or wires before
you dig. DO NOT install near roof lines or other structures that could shed snow, ice or excessive run
off onto your shelter. DO NOT hang objects from the roof or support cables.
WARNING:
Risk of re. DO NOT smoke or use open ame devices (including grills, re pits, deep fryers, smokers or
lanterns) in or around the shelter. DO NOT store ammable liquids (gasoline, kerosene, propane, etc.) in
or around your greenhouse. Do not expose top or sides of the shelter to open re or other ame source.
CAUTION:
Use CAUTION when erecting the frame. Use safety goggles during installation. Secure and bolt together
overhead poles during assembly. Beware of pole ends.
PROPER ANCHORING AND INSTALLATION OF FRAME:
PROPER ANCHORING OF THE FRAME IS THE RESPONSIBILITY OF THE CONSUMER.
ShelterLogic
securely has the potential to y away causing damage, and is not covered under the warranty. Periodically check the anchors to ensure
stability of shelter. ShelterLogic
quickly removed and stored prior to severe weather conditions. If strong winds or severe weather is forecasted in your area, we
recommend removal of cover.
®
Corp.
is not responsible for damage to the unit or the contents from acts of nature. Any shelter that is not anchored
®
Corp. cannot be responsible for any shelter that blows away. NOTE: Your greenhouse’s cover can be
REPLACEMENT PARTS, ASSEMBLY, SPECIAL ORDERS:
Genuine ShelterLogic
application, replacement covers, wall and enclosure kits, vent and light kits, frame parts, zippered doors and other accessories. All
items are shipped factory direct to your door.
U.S. CUSTOMER SERVICE: 1-800-524-9970 INTERNATIONAL CUSTOMER SERVICE: 001-860-945-6442 CANADA CUSTOMER SERVICE: 1-800-559-6175
®
Corp. replacement parts and accessories are available from the factory, including anchoring kits for nearly any
QUESTIONS - CLAIMS - SPECIAL ORDERS? CALL OUR CUSTOMER SERVICE HOTLINE:
HOURS OF OPERATION: MON-FRI 8:30AM-8:00PM EST, SAT-SUN 8:30AM-5:00PM EST.
CARE AND CLEANING:
A tight cover ensures longer life and performance. Always maintain a tight cover. Loose fabric can accelerate deterioration of cover
fabric. Immediately remove any accumulated snow or ice from the roof structure with a broom, mop or other soft-sided instrument.
Use extreme caution when removing snow from cover- always remove from outside the structure. DO NOT use hard-edged tools or
instruments like rakes or shovels to remove snow. This could result in punctures to the cover. DO NOT use bleach or harsh abrasive
products to clean the fabric cover. Cover is easily cleaned with mild soap and water.
WARRANTY:
This greenhouse carries a full limited warranty against defects in workmanship. ShelterLogic
that if properly used and installed, the product and all associated parts, are free from manufacturer’s defects for a period of:
1 YEAR FOR COVER FABRIC, END PANELS AND FRAMEWORK.
Warranty period is determined by date of shipment from ShelterLogic® Corp. for factory direct purchases or date of purchase from an authorized
reseller, (please save a copy of your purchase receipt). If this product or any associated parts are found to be defective or missing at the time of receipt,
ShelterLogic
parts shall be covered for the remainder of the Original Limited Warranty Period. All shipping costs will be the responsibility of the customer. Parts and
replacements will be sent C.O.D. You must save the original packaging materials for shipment back. If you purchased from a local dealer, all claims
must have a copy of original receipt. After purchase, please ll out and return warranty card for product registration. Please see warranty card for more
details.
®
Corp.v will repair or replace, at it’s option, the defective parts at no charge to the original purchaser. Replacement parts or repaired
®
Corp. warrants to the Original Purchaser
Covered by U.S. Patents and patents pending: 6,871,614; 6,994,099; 7,296,584; D 430,306; D 415,571; D 414,564; D 409,310; D 415,572
9/23/11 70641
05_70641_B2Page 2
6' x 8' x 6'6" Organic Growers Greenhouse - Parts List - Model #70641
Description of Parts:
3-Way Frame Connectors
4-Way Frame Connectors
34.4 in. Poles
22.2 in. Upright Poles
45.7 in. Roof Rails
46.1 in. Cover Rails
40.7 in. Side Vent Rails
27.9 in. Side Vent Rails
Quantity Part #
6
3
12
6
6
4
2
4
802860
802861
802864
802862
802868
802695
802866
802867
Cover
4-Way Cover Rail Half-Clamps
3-Way Cover Rail Half-Clamps
Bolts
Bolts
Washer
Wing Nut
Bungee Cords
Foot Plates
1
1
/
4
/
4
x 1
x 1
1
/
4
1
in.
/
4
7
/
5
/
in.
8
8
in.
in.
1
4
8
36
14
8
50
12
6
803028
13201
13202
03032
10115
01011
07000
10066
802916
15 in. Auger Anchors (Temporary)
Cable - 24 in. Length
Cable Clamps
4
4
4
10014
801138
10016
05_70641_B2Page 3
1. LAY OUT ROOF FRAME
802860 802860
802861
802868 802868
802864802864
802860 802860
802864802864
802861
802864802864
802868 802868
802860 802860
802861
802868 802868
2. ASSEMBLE ROOF FRAME
4-Way Connections
802868
802861
03032
07000
Use 03032 bolts and 07000 wingnuts as shown.
802864
07000
802868
4-Way Connection
802864
03032
03032
07000
802868
03032
07000
802868
3-Way Connections
03032
802860
03032
07000
802864
802861
05_70641_B2Page 4
3. ASSEMBLE LEGS & ATTACH TO ROOF FRAME Use bolts as shown in illustrations.
A. Assemble each of the 6 legs.
B. Attach legs with 1-7/8 inch bolts (#03032) on one side of roof frame, letting the other side of roof frame rest
on the ground.
C. Attach remaining legs with bolts to opposite side of roof frame.
Leg Assembly
A
Attach Legs to Roof Frame
802862
07000
802864
07000
802916
10115
03032
07000
Assembled
Leg
B
03032
B
C
05_70641_B2Page 5
4. ASSEMBLE COVER RAILS
A. Place a cover rail (802695) between each leg and secure them with cover clamps as shown below.
NOTE:
Loosely HAND-TIGHTEN
these connections.
B. Slide the cover rails so they are approximately 8 inches up from the ground.
Middle Rib Cross Rail Clamps
802864
802695
07000
End Rib Cross Rail Clamps
13201
01011
802864
13202
10115
802695
10115
802695
01011
07000
5. SQUARING UP THE FRAME
A. Place frame in its nal location, which needs to be as at and level as possible.
B. Measure across opposite corners. These distances must be equal to within 1 inch.
C. Check that the front and rear of the frame measures 6 feet in width
6ft.
6ft.
05_70641_B2Page 6
Loading...