Page 1
ULTRAMAX CANOPY
ENCLOSURE KIT
Assembly Instructions
Frame Not Included
Above image for illustrative
purposes only: 30' x 30' shown.
FOR CANOPY MODELS:
Description Model #
24' x 30' 2-3/8" ULTRAMAX - 12 Leg - Enclosure Kit - White
24' x 40' 2-3/8" ULTRAMAX - 14 Leg - Enclosure Kit - White
24' x 50' 2-3/8" ULTRAMAX - 18 Leg - Enclosure Kit - White
30' x 30' 2-3/8" ULTRAMAX - 12 Leg - Enclosure Kit - White
30' x 40' 2-3/8" ULTRAMAX - 14 Leg - Enclosure Kit - White
30' x 50' 2-3/8" ULTRAMAX - 18 Leg - Enclosure Kit - White
27275
27276
27277
27775
27776
27777
150 Callender Road
Watertown, CT 06795
www.shelterlogic.com
7/10/09
1-800-524-9970
Canada:
1-800-559-6175
05-27275_27276_27277_27775_27776_27777-0APage 1
Page 2
Risk of re. Do not smoke or use open ame devices (including grills, re pits, deep fryers, smokers or
lanterns) in or around the shelter. DO NOT store ammable liquids (gasoline, kerosene, propane, etc.) in
or around your shelter. Do not expose top or sides of the shelter to open re or other ame source.
WARNING:
CAUTION:
PROPER ANCHORING OF THE FRAME IS THE RESPONSIBILITY OF THE CONSUMER.
ShelterLogic
®
, LLC
is not responsible for damage to the unit or the contents from acts of nature. Any shelter that is not anchored
securely has the potential to y away causing damage, and is not covered under the warranty. Periodically check the anchors to ensure
stability of shelter. The preferred anchoring system includes the use of bolted cement wedge lags for the frame. ShelterLogic
®
, LLC
cannot be responsible for any shelter that blows away. NOTE: Your shelter’s cover can be quickly removed and stored prior to severe
weather conditions. If strong winds or severe weather is forecast in your area, we recommend removal of cover. Check with your insur-
ance carrier for any damage as you would for any other outdoor structure or personal property claims.
PROPER ANCHORING AND INSTALLATION OF FRAME:
A tight cover ensures longer life and performance. Always maintain a tight cover. Loose fabric can accelerate
deterioration of cover fabric. Immediately remove any accumulated snow or ice from the roof structure with a
broom, mop or other soft-sided instrument. Use extreme caution when removing snow from cover- always
remove from outside the structure. DO NOT use hard-edged tools or instruments like rakes or shovels to
remove snow. This could result in punctures to the cover. DO NOT use bleach or harsh abrasive products to
clean the fabric cover. Cover is easily cleaned with mild soap and water.
Covered by U.S. Patents and patents pending: 6,871,614; 6,994,099; 7,296,584; D 430,306; D 415,571; D 414,564; D 409,310; D 415,572
CARE AND CLEANING:
Prior to installation, consult with all local municipal codes regarding installation of temporary shelters.
Choose the location of your shelter carefully. DANGER: Keep away from electrical wires. Check for
overhead utility lines, tree branches or other structures. Check for underground pipes or wires before
you dig. DO NOT install near roof lines or other structures that could shed snow, ice or excessive run
off onto your shelter. DO NOT hang objects from the roof or support cables.
ATTENTION:
This shelter product is manufactured with quality materials. It is designed to t the ShelterLogic
®
, LLC custom fabric cover included.
ShelterLogic
®
, LLC Shelters offer storage and protection from damage caused by sun, light rain, tree sap, animal - bird excrement
and light snow. Please anchor this ShelterLogic
®
, LLC structure properly. See manual for more anchoring details. Proper anchoring,
keeping cover tight and free of snow and debris is the responsibility of the consumer. Please read and understand the installation detail,
warnings and cautions prior to beginning installation. If you have any questions call the customer service number listed below. Please
refer to the warranty card inside this package.
DANGER:
Use CAUTION when erecting the frame. Use safety goggles during installation. Secure and bolt
together overhead poles during assembly. Beware of pole ends. Use goggles when installing bungee
cords. Bungee cords are under extreme tension and may cause severe injury to eyes. Please use
caution when applying, as they may snap out of your hand and cause injury.
REPLACEMENT PARTS, ASSEMBLY, SPECIAL ORDERS:
Genuine ShelterLogic
®
, LLC replacement parts and accessories are available from the factory, including anchoring kits for nearly any
application, replacement covers, wall and enclosure kits, vent and light kits, frame parts, zippered doors and other accessories. All
items are shipped factory direct to your door.
This shelter carries a full limited warranty against defects in workmanship. ShelterLogic
®
, LLC warrants to the Original Purchaser that if
properly used and installed, the product and all associated parts, are free from manufacturer’s defects for a period of:
1 YEAR FOR COvER FABRIC, END PANELS AND FRAMEwORk
Warranty period is determined by date of shipment from ShelterLogic®, LLC for factory direct purchases or date of purchase from an authorized
reseller, (please save a copy of your purchase receipt). If this product or any associated parts are found to be defective or missing at the time of receipt,
ShelterLogic
®
, LLC will repair or replace, at it’s option, the defective parts at no charge to the original purchaser. Replacement parts or repaired parts
shall be covered for the remainder of the Original Limited Warranty Period. All shipping costs will be the responsibility of the customer. Parts and replacements will be sent C.O.D. You must save the original packaging materials for shipment back. If you purchased from a local dealer, all claims must have a
copy of original receipt. Check with your insurance carrier for any damage as you would for any other outdoor structure or personal property claim. After
purchase, please ll out and return warranty card for product registration. Please see warranty card for more details.
WARRANTY:
Questions - claims - special orders? call our customer service Hotline:
u.s. customer service: 1-800-524-9970 international customer service: 001-860-945-6442 canada customer service: 1-800-559-6175
Hours oF operation: mon-Fri 8:30am-8:00pm est, sat-sun 8:30am-5:00pm est.
05-27275_27276_27277_27775_27776_27777-0APage 2
Page 3
DESCRIPTION OF PARTS:
SIDE WALLS
Fits Model #
24'x30' - 27272
24'x40' - 27276
24'x50' - 27277
30'x30' - 27775
30'x40' - 27776
30'x50' - 27777
BACK PANELS
Fits Model #
24'x30' - 27272
24'x40' - 27276
24'x50' - 27277
30'x30' - 27775
30'x40' - 27776
30'x50' - 27777
Enclosure
Kit Model #
27275 802145 2
27276 802146 2
27277 802147 2
27775 802145 2
27776 802146 2
27777 802147 2
Enclosure
Kit Model #
27275 802141 1
27276 802141 1
27277 802141 1
27775 802143 1
27776 802143 1
27777 802143 1
Side Wall
Model#
Back Panel
Model#
Quantity
Quantity
3-ZIPPER DOOR PANELS
Fits Model #
24'x30' - 27272
24'x40' - 27276
24'x50' - 27277
30'x30' - 27775
30'x40' - 27776
30'x50' - 27777
Enclosure
Kit Model #
27275 802142 1
27276 802142 1
27277 802142 1
27775 802144 1
27776 802144 1
27777 802144 1
Side Wall
Model#
BUNGEE CORDS*
Enclosure Kit Model # Bungee Cord Model# Quantity
27275
27276 122
27277 138
27775 122
27776 130
27777 146
*For holding enclosure walls and doors
10066
Quantity
114
05-27275_27276_27277_27775_27776_27777-0APage 3
Page 4
NOTES:
• Canopy Enclosure panels attach to frame with bungee cords.
• Leave Canopy Cover bungees in place when attaching Enclosure panels.
CAUTION: Bungee Cords are under extreme tension. Use Caution when installing. Safety glasses are
recommended to prevent injury.
1. ATTACh SIDE WALLS TO FRAME
A. If tightened at corner leg poles, disengage the TwistTite™ cord and “S” hook from canopy cover and corner
legs. Re-tighten after all Enclosure panels have been secured.
B. Attach the extension panels with bungees to the cross rails at the top rst. Adjust the panels as needed to
ensure a tight and even t before securing to the leg poles.
Interior View Enclosure Panel Setup
Interior View of Canopy Base Feet
Side Wall
Panel
(Interior)
Exterior View of Canopy Base Feet
Side Wall
Panel
(Exterior)
Side Wall
Panel
Insert Bungee Cord Through Grommet
05-27275_27276_27277_27775_27776_27777-0APage 4
Page 5
2. ATTACh ENCLOSURE END AND ZIPPER DOOR PANELS
When securing enclosure panels to corner legs, note that each bungee is shared with the neighboring panel.
NOTE: Door panels zippers must be closed when securing door panel.
Interior / Rear View of Canopy Enclosure Panels
Back Panel
Side Wall
Panel
One bungee for
both panels.
3. TIGhTEN ThE COvER WITh TWIST TITE
™
A. Wrap the cord with plastic ball and "S" hook at the corners of the cover around the
corner leg poles. Insert "S" hook into the hole of the corner leg poles.
B. Twist each leg pole toward the inside of the shelter until the cover becomes tight
Twist the leg poles equally to ensure the cover stays aligned during tightening.
4. KEEPING DOOR PANELS OPEN
The front door panel has grommets positioned to hold the doors open in either
of the below congurations with the use of bungee cords.
Twist-Tite™ Tighten Cover
05-27275_27276_27277_27775_27776_27777-0APage 5
Loading...