Page 1
12' x 12'
CELEBRATION CANOPY
Assembly Instructions
DESCRIPTION MODEL #
12' x 12' Celebration Canopy - 4 Leg - Blue
RECOMMENDED TOOLS
Please read instructions COMPLETELY before assembly. This shelter MUST be securely anchored.
THIS IS A TEMPORARY STRUCTURE AND NOT RECOMMENDED AS A PERMANENT STRUCTURE.
Before you start: 2+ individual recommended for assembly, approximate time 1 hr.
25783
150 Callender Road
Watertown, CT 06795
www.shelterlogic.com
01/07/09
Page 1
1-800-524-9970
Canada:
1-800-559-6175
05-25783-0D
Page 2
ATTENTION:
This shelter product is manufactured with quality materials. It is designed to t the ShelterLogic
ShelterLogic
Please anchor this ShelterLogic
®
, LLC Shelters offer storage and protection from damage caused by sun, light rain, tree sap and animal - bird excrement.
®
, LLC structure properly. See manual for more anchoring details. Proper anchoring, keeping cover
tight and free of snow and debris is the responsibility of the consumer. This shelter is not recommended for severe weather conditions.
Please read and understand the installation detail, warnings and cautions prior to beginning installation. If you have any questions call
the customer service number listed below. Please refer to the warranty card inside this package.
®
, LLC custom fabric cover included.
DANGER:
Prior to installation, consult with all local municipal codes regarding installation of temporary shelters.
Choose the location of your shelter carefully. DANGER: Keep away from electrical wires. Check for
overhead utility lines, tree branches or other structures. Check for underground pipes or wires before
you dig. DO NOT install near roof lines or other structures that could shed debris onto your shelter.
DO NOT hang objects from the roof or support cables.
WARNING:
Risk of re. DO NOT smoke or use open ame devices (including grills, re pits, deep fryers, smokers or
lanterns) in or around the shelter. DO NOT store ammable liquids (gasoline, kerosene, propane, etc.) in
or around your shelter. Do not expose top or sides of the shelter to open re or other ame source.
CAUTION:
Use CAUTION when erecting the frame. Use safety goggles during installation. Secure and bolt together
overhead poles during assembly. Beware of pole ends.
PROPER ANCHORING AND INSTALLATION OF FRAME:
PROPER ANCHORING OF THE FRAME IS THE RESPONSIBILITY OF THE CONSUMER.
ShelterLogic
securely has the potential to y away causing damage, and is not covered under the warranty. Periodically check the anchors to ensure
stability of shelter. ShelterLogic
quickly removed and stored prior to severe weather conditions. If strong winds or severe weather is forecast in your area, we recommend removal of cover.
®
, LLC
is not responsible for damage to the unit or the contents from acts of nature. Any shelter that is not anchored
®
, LLC cannot be responsible for any shelter that blows away. NOTE: Your shelter’s cover can be
REPLACEMENT PARTS, ASSEMBLY, SPECIAL ORDERS:
Genuine ShelterLogic
application, replacement covers, wall and enclosure kits, vent and light kits, frame parts, zippered doors and other accessories. All
items are shipped factory direct to your door.
QUESTIONS - CLAIMS - SPECIAL ORDERS? CALL OUR CUSTOMER SERVICE HOTLINE:
U.S. CUSTOMER SERVICE: 1-800-524-9970 INTERNATIONAL CUSTOMER SERVICE: 001-860-945-6442 CANADA CUSTOMER SERVICE: 1-800-559-6175
HOURS OF OPERATION: MON-FRI 8:30AM-8:00PM EST, SAT-SUN 8:30AM-5:00PM EST.
®
, LLC replacement parts and accessories are available from the factory, including anchoring kits for nearly any
CARE AND CLEANING:
A tight cover ensures longer life and performance. Always maintain a tight cover. Loose fabric can accelerate deterioration of cover fabric. Immediately remove any accumulated debris from the roof structure with a
broom, mop or other soft-sided instrument. Use extreme caution when removing debris from cover- always
remove from outside the structure. DO NOT use hard-edged tools or instruments like rakes or shovels to
remove debris. This could result in punctures to the cover. DO NOT use bleach or harsh abrasive products to
clean the fabric cover. Cover is easily cleaned with mild soap and water.
WARRANTY:
This shelter carries a full limited warranty against defects in workmanship. ShelterLogic
properly used and installed, the product and all associated parts, are free from manufacturer’s defects for a period of:
1 YEAR FOR COvER FABRIC, END PANELS AND FRAMEWORk
Warranty period is determined by date of shipment from ShelterLogic®, LLC for factory direct purchases or date of purchase from an authorized
reseller, (please save a copy of your purchase receipt). If this product or any associated parts are found to be defective or missing at the time of receipt,
ShelterLogic
shall be covered for the remainder of the Original Limited Warranty Period. All shipping costs will be the responsibility of the customer. Parts and replacements will be sent C.O.D. You must save the original packaging materials for shipment back. If you purchased from a local dealer, all claims must have a
copy of original receipt. After purchase, please ll out and return warranty card for product registration. Please see warranty card for more details.
®
, LLC will repair or replace, at it’s option, the defective parts at no charge to the original purchaser. Replacement parts or repaired parts
®
, LLC warrants to the Original Purchaser that if
Covered by U.S. Patents and patents pending: 6,871,614; 6,994,099; 7,296,584; D 430,306; D 415,571; D 414,564; D 409,310; D 415,572
Page 2
05-25783-0D
Page 3
Celebration Canopy
Description of Parts:
12' x 12'
Parts List
Model #25783
Quantity Part #
53.7" Rafter Tubes
53.7" Rafter Tubes
37.5" Cross Rails
42.4" Upright Tubes
42.4" Upright Tubes
4-Way Top Connectors
4-Way Top Connectors
Cover
Base Feet
Pins with Rings
Anchors
8
8
4
4
4
1 10585
4 10385
1
4 10050
4
8
10394
10395
10396
10391
10392
800051
10052
10431
Please read instructions COMPLETELY before assembly. This Canopy MUST be anchored.
Page 3
05-25783-0D
Page 4
ASSEMBLY OF FRAME
1. LAY OUT ROOF FRAME:
A. Assembly is easiest if you layout all
pipe parts as shown in the area you
intend to erect the shelter.
B. Attach rafter tube (10395) to (10394).
The connector tube should be facing out.
There are 4 sets.
C. Depress the buttons at the end of
each tube and attach into top connector
(10585). Ensure buttons click into place.
See Detail E.
D. Assemble rafter tube (10386) to
(10396), and (10395). Buttons should be
facing out.
E. Attach all four corner connectors
(10385). See Detail A.
10385
10394 10396
10394
10395
DETAIL A
10395
10585
2. ATTACH LEGS TO FRAME:
A. Assemble leg tubes (10391) to (10392). See Detail B.
Do this with all four legs. Ensure all buttons pop into place.
B. Lift one side of the roof assembly and attach the 3-way
corner connector (10385). Put both legs in one side then
assemble other side. Ensure all buttons pop into place.
10585
10394
10395
10385
10394
10396
10395
10391
10392
DETAIL B
10391
10392
Page 4
05-25783-0D
Page 5
3. SECURE THE COVER:
A. Drape cover over frame. See Detail C.
B. Insert hooks into holes at top of poles at 4 corners shown in
photo. See Detail D.
C. Attach hook and loop strap at each rafter rib. See Detail F.
D. At center of each side, insert webbing into clip and tighten.
See Detail G.
DETAIL E
DETAIL D
DETAIL C
velcro
DETAIL F
DETAIL G
4. ATTACH AND SECURE FEET:
A. Insert the foot plates onto the bottom of the legs
by lifting each leg and slide the foot onto the pole leg.
Rotate the foot until the hole aligns with the hole in
the pole leg. Insert 1 pin (10052) into each hole to
secure each foot. Repeat for each leg. See Detail H.
B. Insert two anchors into each of the foot plates.
(10431). Force each anchor down until completely
inserted. Repeat for each leg. See Detail I.
DETAIL H
DETAIL I
Page 5
05-25783-0C
05-25783-0D
Loading...