ShelterLogic 23572 User Manual [en, es, fr]
10' x 20'
2-IN-1 SUPERMAX CANOPY & ENCLOSURE KIT
Assembly Instructions
DESCRIPTION MODEL #
10' x 20' 2-in-1 SuperMAX Canopy & Enclosure Kit - 8 Leg - White
RECOMMENDED TOOLS
Please read instructions COMPLETELY before assembly. This shelter MUST be securely anchored.
THIS IS A TEMPORARY STRUCTURE AND NOT RECOMMENDED AS A PERMANENT STRUCTURE.
Before you start: 2+ individual recommended for assembly, approximate time 3 hr.
23572
150 Callender Road
Watertown, CT 06795
www.shelterlogic.com
5/11/10
1-800-524-9970
Canada:
1-800-559-6175
05-23572-0BPage 1
ATTENTION:
This shelter product is manufactured with quality materials. It is designed to t the ShelterLogic
ShelterLogic
Please anchor this ShelterLogic
®
, LLC Shelters offer storage and protection from damage caused by sun, light rain, tree sap and animal - bird excrement.
®
, LLC structure properly. See manual for more anchoring details. Proper anchoring, keeping cover
tight and free of snow and debris is the responsibility of the consumer. This shelter is not recommended for severe weather conditions.
Please read and understand the installation detail, warnings and cautions prior to beginning installation. If you have any questions call
the customer service number listed below. Please refer to the warranty card inside this package.
®
, LLC custom fabric cover included.
DANGER:
Prior to installation, consult with all local municipal codes regarding installation of temporary shelters.
Choose the location of your shelter carefully. DANGER: Keep away from electrical wires. Check for
overhead utility lines, tree branches or other structures. Check for underground pipes or wires before
you dig. DO NOT install near roof lines or other structures that could shed debris onto your shelter.
DO NOT hang objects from the roof or support cables.
WARNING:
Risk of re. DO NOT smoke or use open ame devices (including grills, re pits, deep fryers, smokers or
lanterns) in or around the shelter. DO NOT store ammable liquids (gasoline, kerosene, propane, etc.) in
or around your shelter. Do not expose top or sides of the shelter to open re or other ame source.
CAUTION:
Use CAUTION when erecting the frame. Use safety goggles during installation. Secure and bolt together
overhead poles during assembly. Beware of pole ends.
PROPER ANCHORING AND INSTALLATION OF FRAME:
PROPER ANCHORING OF THE FRAME IS THE RESPONSIBILITY OF THE CONSUMER.
ShelterLogic
securely has the potential to y away causing damage, and is not covered under the warranty. Periodically check the anchors to ensure
stability of shelter. ShelterLogic
quickly removed and stored prior to severe weather conditions. If strong winds or severe weather is forecast in your area, we recommend removal of cover.
®
, LLC
is not responsible for damage to the unit or the contents from acts of nature. Any shelter that is not anchored
®
, LLC cannot be responsible for any shelter that blows away. NOTE: Your shelter’s cover can be
REPLACEMENT PARTS, ASSEMBLY, SPECIAL ORDERS:
Genuine ShelterLogic
application, replacement covers, wall and enclosure kits, vent and light kits, frame parts, zippered doors and other accessories. All
items are shipped factory direct to your door.
QUESTIONS - CLAIMS - SPECIAL ORDERS? CALL OUR CUSTOMER SERVICE HOTLINE:
U.S. CUSTOMER SERVICE: 1-800-524-9970 INTERNATIONAL CUSTOMER SERVICE: 001-860-945-6442 CANADA CUSTOMER SERVICE: 1-800-559-6175
HOURS OF OPERATION: MON-FRI 8:30AM-8:00PM EST, SAT-SUN 8:30AM-5:00PM EST.
®
, LLC replacement parts and accessories are available from the factory, including anchoring kits for nearly any
CARE AND CLEANING:
A tight cover ensures longer life and performance. Always maintain a tight cover. Loose fabric can accelerate deterioration of cover fabric. Immediately remove any accumulated debris from the roof structure with a
broom, mop or other soft-sided instrument. Use extreme caution when removing debris from cover- always
remove from outside the structure. DO NOT use hard-edged tools or instruments like rakes or shovels to
remove debris. This could result in punctures to the cover. DO NOT use bleach or harsh abrasive products to
clean the fabric cover. Cover is easily cleaned with mild soap and water.
WARRANTY:
This shelter carries a full limited warranty against defects in workmanship. ShelterLogic
properly used and installed, the product and all associated parts, are free from manufacturer’s defects for a period of:
1 YEAR FOR COVER FABRIC, END PANELS AND FRAMEWORK
Warranty period is determined by date of shipment from ShelterLogic®, LLC for factory direct purchases or date of purchase from an authorized
reseller, (please save a copy of your purchase receipt). If this product or any associated parts are found to be defective or missing at the time of receipt,
ShelterLogic
shall be covered for the remainder of the Original Limited Warranty Period. All shipping costs will be the responsibility of the customer. Parts and replacements will be sent C.O.D. You must save the original packaging materials for shipment back. If you purchased from a local dealer, all claims must have a
copy of original receipt. After purchase, please ll out and return warranty card for product registration. Please see warranty card for more details.
®
, LLC will repair or replace, at it’s option, the defective parts at no charge to the original purchaser. Replacement parts or repaired parts
®
, LLC warrants to the Original Purchaser that if
Covered by U.S. Patents and patents pending: 6,871,614; 6,994,099; 7,296,584; D 430,306; D 415,571; D 414,564; D 409,310; D 415,572
05-23572-0BPage 2
10' x 20' 2-in-1 SuperMAX Canopy & Enclosure Kit - Parts List - Model #23572
Description of Parts:
Quantity Part #
Rafter Poles, Swedged 54
Swedged Leg Poles 76" 8 10043
Cross Poles 77" 9 10044
(Top bend, Shallow bend)
3 - Way Frame Connectors
4 - Way Frame Connectors
(Side bend, Sharp bend)
3 - Way Frame Connectors
4 - Way Frame Connectors
Bungee Cords
Canopy Cover
1
"
2
/
8 10091
2
2
4
4
104 10066
1
10046
10048
10045
10047
10302
Base Feet 10050
Side Walls
Back Panel
Double Zipper Door
TwistTite
Short Pins with Rings
Long Pins with Rings
™
set (bungees + 'S'-hook)
1
" x 2
4
/
1
" x 2
4
/
1
"
4
/
7
"
8
/
8
2
1
1
4
4
8
10082
10301
10303
10056
10051
10052
8Anchors 10431
05-23572-0BPage 3
1. LAY OUT ROOF FRAME
Assembly is easiest if the parts are spread out as shown at the location you want to place the shelter.
REAR
10045
10047
10044
10044
10091
10091
10046
10048
10044
10044
10091
10091
10045
10044
10047
10044
10047
10045
10044
10091
10091
10048
10044
10046
FRONT
10091
10091
10047
10044
10045
05-23572-0BPage 4
2. ASSEMBLE ROOF FRAME
NOTE: Start with the center beam, then assemble the sides
3. ATTACH FEET TO LEGS
A. Insert the leg poles (10043) into the foot plates (10050). Align holes.
B. Insert one long pin (10052) through all eight legs to secure base foot. Repeat with each leg.
A
B
4. ATTACH LEGS TO ROOF FRAME
Attach all legs to one side rst. Let the other side of roof frame rest on the ground.
Repeat for opposite side.
05-23572-0BPage 5
5. SECURE THE LEGS
To secure the center legs to the roof assembly, insert
each of the 4 short pins (10051) through the hole at
the bottom of each of the 4-way connectors.
Rotate the legs, if necessary, to align the holes. This
will complete the leg assembly for this side. Repeat
for the other side.
6. ANCHOR THE FRAME
A. There are four holes on each base foot that the anchor can go into. Select a hole in each base foot. Insert
each anchor into the ground until the round head is touching the base foot.
B. Insert one anchor into all eight base feet.
This is a temporary spike anchor. Not intended for permanent use.
ShelterLogic® Anchoring Kit #10073 is recommended.
Anchoring Base Feet
10431 10043
10050
05-23572-0BPage 6
7. PLACE COvER AND SECURE TO CANOPY FRAME
A. Place cover over assembled roof frame with grommet panels facing down, aligned with cross rails.
B. Make sure the cover is properly aligned on the frame, secure the four corners of the cover with bungees
(10066) to the frame rst. Attach remaining bungees.
Re-adjust bungees position along cross pole as needed to ensure a tight and even t of the cover to the frame.
Grommet Panels for Bungees
Grommet Panel
10047
10302
Grommet Panels for Bungees
Grommet
Panel
10066
10044
Secure Bungee Around Plastic BallInsert Bungee Cord Through Grommet
10045
05-23572-0BPage 7
8. ATTACH ENCLOSURE WALL AND DOOR PANELS
Canopy enclosure panels attach to frame with bungee cords.
A. Attach all the enclosure panels with bungees at the top rst. Adjust the panels as needed to ensure a tight
and even t before securing to legs with bungees.
B. When securing enclosure panels to legs, note that each bungee is shared with the neighboring panel.
NOTE: Door panels zippers must be closed when securing door panel.
CAUTION: Bungee Cords are under extreme tension. Use Caution when installing. Safety glasses are
recommended to prevent injury.
Interior / Rear View of Canopy Enclosure Panels
Side Wall
Panel
10082
Back Panel
10301
One bungee for
both panels.
9. TIGHTEN THE COvER WITH TWIST TITE
A. Wrap the cover's cord with plastic ball and "S" hook
at the corners of the cover around the corner leg poles.
Insert "S" hook into the hole of the corner leg poles.
Twist each leg pole toward the inside of the shelter until
the cover becomes tight. Twist the leg poles equally to
ensure the cover stays aligned during tightening.
™
B. To keep the leg in place, wrap a TwistTite
around the cross rail and insert its "S" hook into the
lined-up hole of the leg pole and 3-way connector.
This will prevent the leg from "untwisting". Do this at
each corner.
cord
™
Twist-Tite™ Tighten Cover
10302
10045
10043
BA
05-23572-0BPage 8
Loading...