KITCHEN BLENDER
PLA0299
Instruction Manual
IMPORTANT SAFETY INSTRUCTIONS
READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
Carefully read this manual before using this appliance.
Ensure that you know how the appliance functions and how to operate it.
Maintain the appliance in accordance with the instructions to ensure that it functions properly.
Keep this manual with the appliance. If the appliance is to be used by a third party, this
instruction manual must be supplied with it.
The safety instructions do not by themselves eliminate any danger completely and proper
accident prevention measures must always be used.
No liability can be accepted for any damage caused by non-compliance with these instructions
or any other improper use or mishandling.
Do not use this appliance if it has been dropped or damaged in any way, or if the supply cord is
damaged.
This appliance is intended to be used in household and similar applications such as
– staff kitchen areas in shops, offices and other working environments
– farm houses;
– by clients in hotels, motels and other residential type environments;
– bed and breakfast type environments.
PACKAGE CONTENTS
1 x Motor Base
1 x Pitcher
1 x Instruction Manual
1 x Warranty Card
Confirm all parts before disposing of carton. Safely dispose of all plastic bags and other
packaging components. They may be potentially dangerous to children.
TECHNICAL SPECIFICATION
Model: PLA0299
230V ~ 50Hz
400 Watt
Operating Time: 2 min Max
Rest Time: 1 min Min
Due to ongoing product improvements, specifications and accessories may change without
notice. Actual product may differ slightly to that depicted.
GENERAL AND ELECTRICAL SAFETY
When using electric appliances always observe safety regulations where applicable to reduce the risk of
fire, electric shock and personal injury. Always check that the power supply corresponds to the voltage
on the rating plate. Always unplug the appliance when not in use.
Supply Cord and Plug
Always unplug from mains supply when not in use. Do not abuse or damage the power cord. If the
supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly
qualified person in order to avoid a hazard. Do not let the supply cord touch hot surfaces.
Children and Infirm Persons
This appliance is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their safety. Do not allow
children to use the blender without supervision, children must be supervised to ensure they do not play
with the appliance.
Water
Do not immerse appliance in water. Do not immerse any part of this appliance or supply cord in water.
Do not use with wet hands or use in damp situations.
Use and Environment
Do not use outdoors. Place the Base on a flat, level, stable surface. Do not let the cord hang over the
edge of any table or bench top. Do not leave in direct sunlight as this may damage the plastic. Do not
continuously operate the blender for more than 2 Minutes. After 2 Minutes of continuous use, switch off
and allow the appliance to cool for at least 1 minute. This appliance is intended for household domestic
use only. Do not use this appliance for anything other than its intended use.
If the blades get stuck, unplug the appliance before you remove the ingredients that block the blades.
Injury Precaution
WARNING: Potential injury from misuse! Avoid contact with all moving parts. Switch off the appliance
and disconnect from supply before changing accessories or approaching parts that move in use. Care
shall be taken when handling the sharp cutting blades, emptying the bowl and during cleaning. Always
disconnect the blender from the supply if it is left unattended and before assembling, disassembling or
cleaning.
Be careful if hot liquid is poured into the food processor or blender as it can be ejected out of the
appliance due to a sudden steaming.
CAUTION: This appliance is not intended to be operated by means of an external timer or separate
remote-control system.
Double Insulation Safety
This appliance is double insulated for your protection. Do not attempt to repair a double insulated
appliance.
Damaged or Dropped
Always inspect your appliance before use. Check parts are correctly attached. Do not use this appliance
if it has been damaged, dropped, left outdoors or dropped in water. Return it to an authorised service
dealer for examination and repair.
DIAGRAM
OPERATION
Before First Use
After unpacking the device you should clean the motor base and pitcher to ensure it is free
from any contaminants, (see below for further instructions). On first use of the Motor there may
be a small amount of smoke and/or odour that is caused by production residues and is normal
and harmless.
Operating Instructions
Ensure the control switch is in position ‘0’ (OFF) and that the blades are free from any
accidental contact before connecting to the mains supply.
The blender can be used to chop small solid ingredients (20-25mm in size) or to mix / stir liquid
type ingredients.
Put the desired ingredients for blending in the jug while detached from the base (anti-clockwise
turn). Make sure the volume is not in excess of 2/3 of the jug capacity. Always make sure there
is plenty of liquid in the jug to enable efficient blending.
Add the blender jug cover and central cover and turn tightly clockwise. Attach the assembled
blender jug to the appliance base and turn it tightly clockwise. The inner safety switch will then
be connected automatically. NOTE: The blender will not operate unless the jug is correctly
attached to the base.
Plug the supply cord plug into a suitable 230V ~ 50Hz power outlet socket and turn the control
switch to position ‘1’ for low speed or position ‘2’ for high speed and run the unit continuously
for 15-20 seconds. Check ingredients for consistency then Repeat the process if necessary.
Position ‘P’ is the pulse function and is used for short bursts at high speed. Turn and hold the
control switch to position ‘P’. The switch is spring loaded and will return to the ‘0’ (OFF) position
once the switch is released.
Turn the power off when the motor is not running, disassemble the blender jug and pour out
blended contents.
Warning
Avoid contact with all moving parts. Do not make contact with the blades with your finger or
any other object when the appliance is operating.
Warning
This appliance is designed for short- term operation only. Do not use for more than 2 minutes
continuously without a short break of at least 1 minute.
Safety Protection
The motor is equipped with a protection setting. When overloaded it will automatically switch
off and re-operate after cooling.
MAINTENANCE
Regular maintenance of your appliance will keep it safe and in proper operational order.
Before Cleaning
When not in use or before cleaning, always disconnect the appliance from the mains supply.
Never immerse the motor unit in water or any other fluid, not rinse it under the tap. Use only a
moist cloth to clean the motor unit.
Care should be taken when handling the sharp cutting blades, emptying the bowl and during
cleaning.
Cleaning
Regularly clean the outside of the appliance with a soft damp cloth and dry it with a dry
towel. Do not immerse in water.
Do not use harsh solvents to clean the plastic. Never use rough scouring pads or abrasive
cleansers on any plastic or metal parts as the surface may be damaged.
Disassemble the used accessories and parts; clean them in dishwasher or in warm water
with some washing-up liquid.
After cleaning, let them dry by air, and then store them properly for future use.
Motor Base
Never immerse the motor base in water. Wipe it only with a moist cloth.
Store in a Safe Place
When not in use store your appliance and all its accessories and instruction manual in a safe
and dry place
Loading...