Sharper Image Women’s Heated Puffer Jacker User Manual
WOMEN’S HEATED PUFFER JACKET
Item No. 206596
User Guide
HOW TO TURN ON CHANGING THE HEAT SETTINGS
1
To turn the jacket on, hold down the
heat button for 3 seconds until light
comes on.
Turn ON by holding
down for 3 seconds
Press again to
change heat settings
CONNECTING THE JACKET
Inside the Jacket
Connect the built-in jacket USB
connector (located inside the
battery pocket) to your power
bank. Then unplug the jacket from
the power bank when not in use.
Turn OFF by holding
down 3 seconds
To change the temperature, press
the heat button to cycle through the
desired heat settings.
3 HEAT SETTINGS
Blue (Low) White
(Medium)
Estimated Power Duration Based on 10,000 mAh
Low Setting
Medium Setting
High Setting
Red (High)
13 Hours
8 Hours
4 Hours
Built-In USB Connector
MACHINE WASHABLE
Inside the Jacket
Disconnect the power bank
from the jacket. Cover the
USB connector in the jacket
with the built-in protector
before washing.
USB Protector
Sharper Image branded items purchased from SharperImage.
com include a 1-year limited replacement warranty. For
Customer Service, please call +1 (877) 210-3449.
The SHARPER IMAGE® name and logo are registered trademarks.
©Sharper Image. All Rights Reserved.
1. Plug Micro USB cord into the computer’s
USB port or USB wall charger
2. Plug USB power bank into Micro USB port
3. All 4 lights will stay lit when fully charged
USB Output
Charging Input
Power Indicator
Power ON/OFF
Loading...