Sharper Image The True Wireless Earbuds User Manual

Sharper Image The True Wireless Earbuds User Manual

FRONT

CONGRATULATIONS ON YOUR PURCHASE OF THE TRUE WIRELESS EARBUDS.

Please read all instructions and warnings prior to use. Keep this sheet as it contains important information for future reference.

QUICK START GUIDE

01

02

03

CHARGE

CONNECT

PLAY

01CHARGE

1.Place the earbuds into the case

2.For wired charging - connect the charging cable to the earbud case then connect the USB connector to a power source

For wireless charging - place the back of the case on a Qi charging base

3.Blue lights on the case indicate when the case is charging. All 4 LEDs will light up when the case if fully charged

4.A white LED on earbuds will turn on while charging and turn off when fully charged.

02CONNECT

Your device must have BLUETOOTH® capability. Consult your device manufacturer or user manual if you are unsure if your device has this feature.

1.Turn off any devices that may have been previously paired to the earbuds.

2.Remove the earbuds from their case and place the earbuds in your ear

3.Place your device within 3 feet of earbuds

4.Enable BLUETOOTH® on your device and search for new BLUETOOTH® devices. Refer to your device’s manual on how to enable and operate BLUETOOTH®.

5.Select SI TWS from the list of BLUETOOTH® available devices

6.You can now stream music wirelessly from your device to your earbuds.

Note: Your earbuds will automatically pair with your device when the earbuds are removed from their case.

03 PLAY TOUCH CONTROLS

MUSIC

3X

3X

3X

L/R

L

R

CALLS

2X

1S

L/R L/R

TOUCH CONTROLS CONT.

ON

OFF

POWER

 

5S

5S

L/R

L/R

ACTIVATE

 

VOICE ASSISTANT

 

1S

 

L/R

 

ADVANCED

TO ENTER PAIRING MODE

TO SWITCH MICROPHONE

AND LOOK FOR A

BETWEEN EARBUD AND

BT ENABLED DEVICE

PHONE:

Tap four times on one

Triple tap one earbud

earbud

TO SWITCH BETWEEN 2

TO CLEAR PAIRED DEVICE

CALLS

While earbuds are charging,

Single tap one earbud

long tap one earbud for 5

TO HANG UP CURRENT CALL

second

TO CONNECT TWO EARBUDS

WHEN IN 2 CALLS

Double tap one earbud

Clear paired devices then

TO RESET

double tap on each earbud

TO CONNECT 1 EARBUD

Forget earbuds in your

device’s Bluetooth setting

Power off both earbuds then

then reset your device.

power the one you want to

Place earbuds in their case

use

and turn your device back

 

on.

BACK

WHAT YOU GET

QI CHARGING CASE

2 EARBUDS

4 PAIRS OF EARBUD TIPS

USB TO USB C CABLE

FIND THE RIGHT FIT

Start with the largest size ear tips first and work your way down.

There is an improper seal if:

Earbuds do not stay in during light activity

There is no reduction in outside noise

You experience “distant” sounds

KEEP THIS INSTRUCTION MANUAL AS IT CONTAINS IMPORTANT INFORMATION FOR FUTURE REFERENCE.

Due to continuous product improvements, the pictures on this manual may differ slightly from the actual product.

SAFETY WARNINGS

PLEASE READ BEFORE USE

Not a children’s item. Keep out of the reach of children.

Listening to loud music for extended periods of time may damage your hearing

Do not use earbuds while driving

Always pay attention to your surrounding while using this product

Only use the included power cable for operation.

Do not attempt to use this product for other purposes

Do not expose to extreme temperatures or moisture

Thoroughly inspect products before every use. If the product appears worn, frayed/splintered, cracked, or broken in any manner, discontinue use and discard immediately.

RECHARGEABLE BATTERY WARNING

This product contains batteries that are non-replaceable.

There is a risk of fire and personal injury if battery is punctured, damaged, or misused.

Do not dismantle, crush, incinerate or short-circuit battery.

Never expose battery to extreme temperatures or moisture.

Keep away from flammable materials and direct sunlight.

Only charge using the provided charger, cable, and/or adapters.

Rechargeable battery is only to be charged by an adult.

Adult supervision is required while charging the battery.

Allow battery to cool to room temperature before charging.

Charge on a non-flammable surface and keep away from flammable products.

Discontinue charging if battery becomes hot, swells, smokes, or gives off a strong odor.

Battery chargers used with the product are to be regularly examined for damage to the cord, plug, enclosure, and other parts. In the event of such damage, chargers must not be used until the damage has been repaired.

Recycle or dispose of battery according to federal, state, and local laws.

Keep these instructions for future reference.

FCC + LEGAL STATEMENTS

SHARPER IMAGE® NAME AND LOGO (INCLUDING THE 77 LOGO) ARE TRADEMARKS OR REGISTERED TRADEMARKS. DISTRIBUTED BY AND © 2020 MERCHSOURCE, LLC. IRVINE, CA 92618. ALL RIGHTS RESERVED.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

SPECIFICATIONS

•Bluetooth 5.0

•Range: Approximately 30ft

•Battery: 40mAh per earbud, 400mAh case •IPX4 Sweat resistant

•Call/Playback time: Approximately 4 hours @ 50% volume

Loading...