Sharper Image SI711 Instructions Manual

Download

Page 1

Hot+Cold

Beverage

Holder for Car

& Desktop

SI711 Instructions

Read and save these instructions.

Page 2

Dear Sharper Image Customer, Thank you for your purchase of a Sharper Image product. We appreciate

your business very much. This item was created by Sharper Image Design, our company’s own

product development group. Please accept my personal assurance of your complete satisfaction with this product’s quality and performance. We offer generous return privileges and excellent warranties on all our products.

For more than 25 years, The Sharper Image has shared the fun of discovering innovative products that make life better and more enjoyable. We’ve been in business a long time because we are an exciting place to shop and — just as importantly — we strive to deliver great customer service that exceeds your expectations.

Enjoy your purchase! Respectfully,

Richard Thalheimer Founder, Chairman and Chief Executive Officer

Call 1-800-344-4444 for 24-7 ordering and customer service,

or go to , our complete online store.

Page 3

•The Hot+Cold Beverage Holder is designed for short-term use only. The temperature is not regulated. (Cools to approximately 68 degrees below the ambient temperature.)

•Do not store unopened cans in this product. If accidentally switched to HOT, cans may explode from sustained heat.

•Do not place or immerse in water or other liquid.

•Only use this product with the provided power cords.

•Never operate this product if it has a damaged cord or adapter, is not working properly, or has been dropped or damaged.

•To prevent accumulated frozen condensation, do not operate this product in COLD mode for prolonged periods while empty.

•Condensation may occur, especially when used during wet and cool days.

Warning

Page 4

To use the Hot+Cold Beverage Holder at home or in the office, plug one end of the included AC adapter into the Adapter Jack, then plug the other end into a standard 120V outlet.

For automotive use, plug one end of the included DC adapter into the Adapter Jack, then plug the other end into a 12V vehicle accessory jack.

DC Adapter AC Adapter

Beverage Holder Operation

Adapter Jack

Page 5

When power is switched on, the blue LED on the rear of the unit illuminates.

Warning: The 12V DC adapter may not fit all vehicles. Ensure that the plug fits securely into the vehicle’s accessory jack without being forced. If the fit is not correct, discontinue use.

To select HOT or COLD mode, press the respective button on the unit’s control panel. A blue LED illuminates for COLD mode; a red LED illuminates for HOT mode.

Note: The included travel mug is recommended for use with hot beverages; other containers may become overheated.

Beverage Holder Operation

Page 6

What Is Covered

This warranty covers any defects in materials or workmanship, with the exceptions stated below.

How Long Coverage Lasts

This warranty runs for one year from the date of original purchase.

What Is Not Covered

This warranty does not cover damage caused by misuse or use other than as intended and described in the product instruction manual, or loss or damage to batteries or removable parts.

What The Sharper Image Will Do

The Sharper Image will repair any defects in materials or workmanship. In the event repair is not possible, The Sharper Image will either replace this product with one of similar features and price, or refund the full purchase price of the product, whichever you prefer.

How to Obtain Service

Return the product and receipt, along with a brief explanation of the problem, to:

T.S.I. - Returns Department 2901-A West 60th Street Little Rock, AR 72209

If you have questions please feel free to contact our customer service representatives at 1-800-344-5555 or by email at care@sharperimage.com.

650 Davis St., San Francisco, CA 94111 (415) 445-6000

Shop online:

Due to continuing improvements, actual product may differ slightly from the product described herein. V1 09/03

One-Year Warranty