Big Screen
Dual-Time
Travel + Desktop
Alarm Clock
SI615 Instructions
Read and save these instructions.
SNOOZE/TIMER
Dear Sharper Image Customer,
Thank you for your purchase of a Sharper Image product. We appreciate
your business very much.
This item was created by Sharper Image Design, our company’s own
product development group. Please accept my personal assurance of your
complete satisfaction with this product’s quality and performance. We offer
generous return privileges and excellent warranties on all our products.
For more than 25 years, The Sharper Image has shared the fun of
discovering innovative products that make life better and more enjoyable. We’ve been in business a long time because we are an exciting
place to shop and — just as importantly — we strive to deliver great
customer service that exceeds your expectations.
Enjoy your purchase!
Respectfully,
Richard Thalheimer
Founder, Chairman and Chief Executive Officer
Call 1-800-344-4444 for 24-7 ordering and customer service,
or go to , our complete online store.
Instructions ......................................................4
Battery Precautions and Requirements ..........................4
Clock Activation .................................................5
Battery Replacement/Installation.................................6
LED Flashlight ...................................................7
Setting the Clock ................................................8
12/24 Hour Display .............................................9
Setting the Alarm...............................................10
Activate the Alarm .............................................11
Snooze Delay ..................................................12
Timer...........................................................
12
Screen Backlight
................................................13
Alarm Demo ...................................................14
Troubleshooting ................................................14
Warranty .......................................................16
Table of Contents
3
Read all instructions carefully before using this product.
Battery Precautions
• Use only the size and type of batteries specified.
• When installing batteries, observe correct +/- polarities.
Incorrect installation may cause damage to the unit.
• Do not mix different types of batteries together (e.g., alkaline
with carbon-zinc or old batteries with new ones).
• If the unit is not going to be used for a long period of time,
remove batteries to prevent damage or injury due to possible
battery leakage.
Instructions
4
Clock Activation
Before using clock for the first time, slide open the small battery
compartment cover located on the bottom of the clock. Remove
and discard the paper tab in the battery compartment.
Battery and Power Requirements
5
CR2032
Battery
Compartment
for Clock
AA Battery Compartment
for Alarm/Backlight/Flashlight
1. Slide open the small battery compartment cover located on
the bottom of the clock.
2. Insert one CR2032 battery observing +/- polarities diagram
inside the battery compartment.
3. Close the battery cover.
Battery Installation for Alarm/Backlight/Flashlight
1. Slide open the AA battery cover located on the bottom
of the clock.
2. Insert six AA batteries (purchase separately) observing +/-
polarities diagram located inside battery compartment.
3. Close the battery cover.
Note: The alarm, screen backlight and flashlight are powered by
the included 6V DC adapter or by six AA alkaline batteries
(purchase separately).
Clock Battery Replacement
6
To use the mini flashlight, slide the FLASHLIGHT ON/OFF switch
located on the side of the clock to the ON position.
LED Flashlight
7
1. To set the clock, press the button to switch the display
between HOME TIME and DUAL TIME (separate time
zones).
2. Hold down the button on the selected time zone and
simultaneously press the CLOCK HR or MIN button until
the desired time appears on the display.
SNOOZE/TIMER
Setting the Clock
8
9
1. To set the clock to 12- or 24-hour mode, slide the 12/24 HR
switch, located under the AA battery cover, using a straightened paper clip or similar object.
2. To finalize the setting , press the RESET button located under
the AA battery cover adjacent to the 12/24 HR switch.
12/24 Hour Display
RESET and
12/24 HR buttons
located in
AA compartment.
10
1. To set the alarm, press the button to switch the display
between HOME TIME and DUAL TIME (separate time zones.)
2. Hold down the button on the selected time zone and
simultaneously press the ALARM HR or MIN button until the
desired ALARM TIME appears on the display.
Note: The alarm sets to the currently selected time zone.
SNOOZE/TIMER
Setting the Alarm
11
1. To switch on the alarm, press the ALM ON/OFF button.
The alarm icon on the LCD indicates that the alarm is active.
2. To stop the alarm, press the ALM ON/OFF button once.
The alarm stops and is automatically reset to sound at the
same time the next day.
3. To switch off the alarm, press the ALM ON/OFF button again.
The alarm icon disappears and the alarm is deactivated.
Note: Ensure the AM/PM setting is correct when activating
the alarm.
SNOOZE/TIMER
Activate the Alarm
12
To activate the SNOOZE feature, press the SNOOZE/TIMER bar
from 1 to 9 times after the alarm sounds. SNOOZE appears in
the alarm window. Each press of the bar adds 10 minutes of
snooze time, up to 90 minutes.
Timer
To activate the TIMER feature, press the SNOOZE/TIMER bar
from 1 to 9 times when the clock is not in alarm mode. The
timer minutes flash. Each press of the bar adds 10 minutes to
the timer countdown, up to 90 minutes. The alarm beeps three
times when the timer countdown reaches zero.
SNOOZE/TIMER
Snooze Delay
13
Setting options:
1- AUTO: Backlight automatically adjusts according to existing light.
2- BRIGHT: Backlight is always ON at maximum level.
3- DIM: Backlight is always ON at low-level.
4- OFF: Backlight is always OFF (except when setting the
clock/alarm).
Note: When unit is battery powered, always switch off the backlight when it is not in use to conserve battery life.
SNOOZE/TIMER
Screen Backlight
14
To test the sound of the alarm, press the DEMO button.
The alarm sounds. To cancel the test, press the button again.
Troubleshooting
• If the clock display appears dim or difficult to read, the battery
may be weak. Replace the CR2032 battery.
(See Clock Battery Replacement.)
•If the clock malfunctions or the display freezes, use a straightened
paper clip or similar object and press the RESET button located
under the AA battery cover to return the clock to its
default settings.
SNOOZE/TIMER
Alarm Demo
15
16
What Is Covered
This warranty covers any defects in materials or workmanship, with the exceptions stated below.
How Long Coverage Lasts
This warranty runs for one year from the date of original purchase.
What Is Not Covered
This warranty does not cover damage caused by misuse or use other than as intended and described in the
product instruction manual, or loss or damage to batteries or removable parts.
What The Sharper Image Will Do
The Sharper Image will repair any defects in materials or workmanship. In the event repair is not possible,
The Sharper Image will either replace this product with one of similar features and price, or refund the full
purchase price of the product, whichever you prefer.
How to Obtain Service
Return the product and receipt, along with a brief explanation of the problem, to:
T.S.I. - Returns Department
2901-A West 60th Street
Little Rock, AR 72209
If you have questions please feel free to contact our customer service representatives at 1-800-344-5555 or
by email at care@sharperimage.com.
This warranty gives you specific legal rights, and you may have other legal rights that vary from state to state.
Copyright 2003
Sharper Image Corporation
650 Davis St., San Francisco, CA 94111
(415) 445-6000
Shop online:
Due to continuing improvements, actual product may differ slightly from the product described herein.
V1 08/03
WARRANTY
Loading...