“Bright As Day!”
®
Power-Port Desk Lamp
SI561 Instructions
Read and save these instructions.
SI561 IM_v2 1106.indd 1 12/7/06 4:08:15 PM
Dear Sharper Image Customer,
Thank you for your purchase of a Sharper Image product. We appreciate
your business very much.
Our goal is that you will be completely satisfied with this product’s
quality and performance. We offer generous return privileges and
excellent warranties on all our products.
Since 1977, The Sharper Image has shared the fun of discovering
innovative products that make life better and more enjoyable. We’ve
been in business a long time because we are an exciting place to shop
and — just as importantly — we strive to deliver outstanding customer
service that exceeds your expectations.
Enjoy your purchase!
Call 1-800-344-4444 for ordering and customer service, or visit
, our award-winning Website.
SI561 IM_v2 1106.indd 2 12/7/06 4:08:16 PM
When using electrical appliances, basic safety precautions
should always be followed.
READ ALL INSTRUCTIONS BEFORE USING.
Lighted lamp is HOT.
WARNING - TO REDUCE THE RISK OF FIRE, ELECTRIC
SHOCK, EXPOSURE TO EXCESSIVE UV, RADIATION OR
INJURY TO PERSONS:
1. Before replacing the bulb, turn off/unplug and allow the lamp
to cool.
2. Lamp becomes HOT
quickly! Only touch the switch/plug
when turning on the lamp.
3. Do not touch hot lamp-containment barrier.
4. Do not remain in direct light from the lamp if skin feels warm.
5. Do not look directly at lighted lamp.
6. Keep lamp away from materials that may burn.
7. Use only with a 27-watt lamp/bulb.
IMPORTANT SAFETY
INSTRUCTIONS
SI561 IM_v2 1106.indd 3 12/7/06 4:08:16 PM
8. Do not operate the lamp with a missing or damaged guard or
lamp-containment barrier.
9. When connecting an AC appliance to the built-in AC outlets
on the base, refer to the power rating of the connected appliance and do not exceed 5A total power load on one or both
outlets combined.
10. Warning: To maintain a good balance and to prevent the lamp
from tipping over, keep the lowest section of the adjustable
arms at or above a 72-degree angle from horizontal.
SAVE THESE INSTRUCTIONS
Power Outlet Instructions
To reduce the risk of electric shock, this lamp has a grounding
type plug that has a third (grounding) pin. This plug will only fit
into a grounding type power outlet. If the plug does not fit into
the outlet, contact a qualified electrician to install the proper
outlet. Never use with an extension cord unless plug can be fully
inserted. Do not alter the plug in any way.
IMPORTANT SAFETY
INSTRUCTIONS
SI561 IM_v2 1106.indd 4 12/7/06 4:08:16 PM
Precautions
RISK OF FIRE: Failure to read and follow these precautions could
result in risk of fire.
1. Do not use with power supply voltage other than 120V AC.
2. Do not use outdoors or in locations with high humidity, such
as bathrooms.
3. Do not install above sources of high heat, such as a stove or
heater.
4. Do not touch the lamp while it is lit or immediately after
turning off the lamp.
Maintenance
Caution: If any malfunction occurs, do not try to repair the unit
yourself. Return it to an authorized facility or to the manufacturer.
The appliance has no user-serviceable parts.
SI561 IM_v2 1106.indd 5 12/7/06 4:08:16 PM
General Instructions
Parts Diagram
Lamp Cover
Lamp/Bulb
(FML27)
Power Control
Knob
Base
Adjustment
Knobs
Arms
USB Port
Grounded
Power Outlets
SI561 IM_v2 1106.indd 6 12/7/06 4:08:17 PM
1. Remove the plastic packing materials from the light fixture.
2. Remove the foam shipping guard from behind the preinstalled lamp.
Note:
The lamp socket (containment barrier) pivots out.
Be certain to push the lamp and socket back into the fixture.
(See Figure A below.)
3. To adjust the lamp height and angle, loosen the knobs on the
fixture arms and move the arms to the desired height and
angle, then tighten the knobs to secure the new positions.
Figure A
Assembly
SI561 IM_v2 1106.indd 7 12/7/06 4:08:17 PM
1. Plug the lamp into a 110-120V three-prong power outlet.
2. Turn the POWER CONTROL KNOB
to turn the light on or off.
The built-in AC power outlets can be used to connect up to two
separate chargers or other AC appliances. Do not exceed 5A total
power load on one or both outlets combined.
The built-in USB power port can be used to connect, power and
charge compatible USB products.
Note:
Not all products that have a USB cable can be charged by
a USB port. Consult your USB product manual if it isn’t obtaining
correct power.
Operation
Power Control
Knob
USB Port
Grounded
Power Outlets
SI561 IM_v2 1106.indd 8 12/7/06 4:08:17 PM
1. The lamp and socket pivot out for easy replacement. Gently
pull the lamp out and slide the lamp out of the fixture socket.
(See Figure B below.)
2. Replace with a new lamp. Replacement lamps are available
from The Sharper Image (Item No. SI928). Do not use any
other lamp with this product.
3. Gently push the lamp and socket back into place.
(See Figure C below.)
Lamp Replacement
Figure B
Figure C
SI561 IM_v2 1106.indd 9 12/7/06 4:08:18 PM
Statement of FCC Compliance — Model SI561
WARNING: Changes or modifications to this unit not expressly
approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
SI561 IM_v2 1106.indd 10 12/7/06 4:08:18 PM
Statement of FCC Compliance — Model SI561
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for assistance.
NOTE:
This product may cause interference to radio equipment
and should not be installed near maritime safety communications
equipment or other critical navigation or communication equipment operating between 0.45-30 MHz.
SI561 IM_v2 1106.indd 11 12/7/06 4:08:18 PM
One-Year Warranty
What Is Covered
This warranty covers any defects in materials or workmanship, with the exceptions stated below.
How Long Coverage Lasts
This warranty runs for one year from the date of original purchase.
What Is Not Covered
This warranty does not cover damage caused by misuse or use other than as intended and described
in the product instruction manual, or loss or damage to batteries or removable parts.
What The Sharper Image Will Do
The Sharper Image warrants this product against defects in materials and workmanship. When repair
is not practical, The Sharper Image will have the option to replace the defective product with a fully
warranted, factory-reconditioned product that is the same or has similar functionality.
How to Obtain Service
Return the product and receipt, along with a brief explanation of the problem, to:
T.S.I. - Returns Department
2901-A West 60th Street
Little Rock, AR 72209
If you have questions please feel free to contact our customer service representatives at 1-800-344-5555
or by email at care@web.sharperimage.com.
This warranty gives you specific legal rights, and you may have other legal rights that vary from state to state.
© 2005, 2006 Sharper Image Corporation
Sharper Image Corporation
350 The Embarcadero, Sixth Floor
San Francisco, CA 94105-1218
Shop online:
Actual product may differ slightly from the product described herein.
V2 11/06
SI561 IM_v2 1106.indd 12 12/7/06 4:08:18 PM
Loading...