Wireless
Security System
SI519 Instructions
Wireless
Security Camera
SI513 Instructions
Read and save these instructions.
Dear Sharper Image Customer,
Thank you for your purchase of a Sharper Image product. We appreciate
your business very much.
Please accept my personal assurance of your complete satisfaction with
this product’s quality and performance. We offer generous return
privileges and excellent warranties on all our products.
For more than 25 years, The Sharper Image has shared the fun of
discovering innovative products that make life easier and more enjoyable. We’ve been in business a long time because we are an exciting
place to shop and — just as importantly — we strive to deliver great
customer service that exceeds your expectations.
Enjoy your purchase!
Respectfully,
Richard Thalheimer
Founder, Chairman and Chief Executive Officer
Call 1-800-344-4444 for 24-7 ordering and customer service,
or go to , our complete online store.
The Wireless Security System comes with one camera transmitter
and one monitor receiver. Additional cameras can be purchased
(see below).
Up to four cameras may be operated within a 100-foot range.
Each camera broadcasts on one of four selectable frequencies.
There is no limit to the number of monitors that can be operated
in the area at one time.
Adapters are included for basic use and battery operation is
available for maximum portability.
For additional cameras or camera/monitor sets
Call 1-800-344-4444 toll free or shop online at
www.sharperimage.com.
Order product SI519 camera/monitor set.
Order product SI513 camera only.
Auxiliary TV/Monitor
The audio/video jack on the monitor can be connected through
the audio-in/video-in jacks of a VCR or TV. This allows recording
and improved picture quality using the screen on your TV.
General Description
The camera and monitor can be powered by batteries or by the
included adapter. We recommend saving batteries by using the
power adapters whenever possible. The batteries are disengaged
automatically if adapters are connected.
•Do not mix old and new batteries.
•Do not mix alkaline, standard (carbon zinc), or rechargeable
(nickel cadmium) batteries.
Batteries may leak or explode if recharged, inserted improperly,
inserted in the wrong direction, disposed of in a fire or mixed
with different battery types.
Battery compartments are located on the rear of both units. Use
the edge of a coin to unscrew the camera battery door lock.
Power Requirements
Adapter
Jacks
The monitor must be set to the same channel as the camera to
receive the camera signal. If more than one camera is used, set
each camera to a different channel. Select the matching channel
on the monitor to switch between desired cameras.
Use the monitor jacks to display the picture and sound on your
own TV/monitor instead of the built-in monitor, or to record
through a VCR. (A cable is included to connect the LCD monitor
to the audio/video jacks on most TV or VCR systems.)
To reduce battery consumption, or if a video display is not
required, set the monitor power switch to AUDIO ONLY.
Controls and Operation
Adjustable
Antennas
Channel
Switch
Removable Base
Channel
Switch
Power
Switch
Video Out
Jack
Power
Switch
Volume and
Picture Adjustment
nterference from other electronic products (or if multiple cameras are
used) may cause poor or distorted reception. Reorient the equipment
and space them further apart to resolve interference problems.
The camera can be wall-mounted or positioned on a flat surface.
(Note: The base is removable.) If it is not convenient to access
the camera for easy battery replacement, we suggest using the
included AC adapter.
Neither the camera nor the monitor are designed for outdoor
use. If outdoor use is desired, mount the camera in a location
that will not be subject to rain or sprinklers.
The infrared LEDs surrounding the camera lens will allow the
camera to function in a totally dark environment (black and
white picture only). The light from these LEDs is not visible to
the human eye. (Note: Night vision may not be clearly focused
at distances under three feet.)
Controls and Operation
Infrared
(Low/No Light) LEDs
WARNING: Changes or modifications to this unit not expressly
approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
NOTE: This product complies with DHHS Rule 21 subchapter J
at date of manufacture.
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation.
Statement of FCC/DHHS Compliance
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for
assistance.
FCC Label Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
Statement of FCC/DHHS Compliance
What Is Covered
This warranty covers any defects in materials or workmanship, with the exceptions stated below.
How Long Coverage Lasts
This warranty runs for one year from the date of original purchase.
What Is Not Covered
This warranty does not cover damage caused by misuse or use other than as intended and described in the
product instruction manual, or loss or damage to batteries or removable parts.
What The Sharper Image Will Do
The Sharper Image will repair any defects in materials or workmanship. In the event repair is not possible,
The Sharper Image will either replace this product with one of similar features and price, or refund the full
purchase price of the product, whichever you prefer.
How to Obtain Service
Return the product and receipt, along with a brief explanation of the problem, to:
T.S.I. - Returns Department
2901-A West 60th Street
Little Rock, AR 72209
If you have questions please feel free to contact our customer service representatives at 1-800-344-5555 or
by email at care@sharperimage.com.
This warranty gives you specific legal rights, and you may have other legal rights that vary from state to state.
Copyright 2003
Sharper Image Corporation
650 Davis St., San Francisco, CA 94111
(415) 445-6000
Shop online:
Due to continuing improvements, actual product may differ slightly from the product described herein.
V10 04/03 Printed in China
WARRANTY
Loading...