Sharper Image Shaver Blade Replacement User Manual

REPLACEMENT BLADE/FOIL SET

FOR WORLD’S FASTEST CORDLESS FOIL SHAVER AND TRIMMER

Item No. 207142

HOW TO

CHANGING THE FOILS

With normal use, the foils should last a long time. However, if the foils become damaged, you can
replace them easily at home. For best performance, it is recommended to change the blades at
the same time as the foils.

FIG. 1

HOLD THE SHAVER FIRMLY
WITH ONE HAND ON THE
SHAVER HEAD AND ONE HEAD
ON THE BODY [FIG. 1].

FIG. 5

USING YOUR HANDS ONLY,
CAREFULLY INSERT THE NEW
FOILS INTO THE SHAVER HEAD
UNTIL THEY ARE PROPERLY
SNAPPED IN PLACE. DO NOT
USE TOOLS, AS THIS MAY
DAMAGE THE FOILS [FIG. 5].

FIG. 2

REMOVE THE SHAVER HEAD
FROM THE BODY

[

FIG. 2].

FIG. 3

USING A SMALL BLADE OR
SCREWDRIVER, CAREFULLY LIFT OUT
THE FOILS FROM THE SIDE, ONE AT A
TIME [FIG. 3-4].

CHANGING THE BLADES

FIG. 6

WITH THE SHAVER HEAD
DETACHED FROM THE BODY,
GRASP ONE BLADE WITH YOUR
THUMB AND INDEX FINGER. HOLD
THE BODY FIRMLY WITH THE
OTHER HAND [FIG. 6].

FIG. 7

ROCK THE BLADE SIDE TO
SIDE, APPLYING GENTLE
PRESSURE UNTIL IT LIFTS
OFF THE BODY [FIG. 7].
REPEAT THIS STEP FOR THE
OTHER BLADES.

FIG. 4

FIG. 8

ATTACH THE NEW BLADES,
USING FIRM BUT GENTLE
PRESSURE [FIG. 8]. FINALLY,
REPLACE THE SHAVER HEAD.

The SHARPER IMAGE® name and logo are registered trademarks.

©Sharper Image. All Rights Reserved.

- 1 -