Sharper Image SC051 Instructions Manual

Talking Height
and Weight
Scale
SC051 Instructions
Read and save these instructions.
Dear Sharper Image Customer,
Thank you for your purchase of a Sharper Image product. We appreciate your business very much.
Please accept my personal assurance of your complete satisfaction with this product’s quality and performance. We offer generous return privileges and excellent warranties on all our products.
For more than
25 years, The Sharper Image has shared the fun of discovering innovative products that make life better and more enjoy­able. We’ve been in business a long time because we are an exciting place to shop and — just as importantly — we strive to deliver great customer service that exceeds your expectations.
Enjoy your purchase!
Respectfully,
Richard Thalheimer Founder, Chairman and Chief Executive Officer
Call 1-800-344-4444 for 24-7 ordering and customer service,
or go to , our complete online store.
Features .....................................................................................6
Care and Maintenance...............................................................7
Diagram of Parts.........................................................................8
Battery Installation......................................................................9
Operation ................................................................................10
Troubleshooting........................................................................17
Specifications ...........................................................................18
Table of Contents
Four modes of operation.
Heavy-duty, hardened glass platform.
Large LCD screen.
Easy-to-operate push-buttons.
Scale announces height and weight through a built-in speaker.
Measures height using a wireless alignment board placed on
the top of your head.
Calculates the difference between actual weight and target
weight.
Features
6
Treat your scale with care — it is a precision instrument. Do
not drop it or jump on it.
Do not place heavy objects on the scale for long periods.
This could adversely affect accuracy.
Do not place the scale in direct sunlight, extreme temperature
or humidity.
Clean the scale with a damp cloth. Do not use chemical
cleaning agents.
If the scale will not be used, remove the batteries.
Care and Maintenance
7
Diagram of Parts
8
MODE
SET
ON/OFF
Ultrasonic Unit
+: Preset Increase
Adjustment
–: Preset Decrease
Adjustment
ON/OFF: Power
MODE: Mode Selection
Voice Speaker:
On/Off
SET: Preset
"Target" Weight
LCD: Liquid Crystal
Display
Diagram of Parts
9
Speaker
(Under the Scale)
Battery Compartments
Hardened
Glass Platform
Base Sensors
Scale runs on four AA batteries (purchase separately).
1. To install batteries, turn scale over and remove two battery
compartment covers, located on the right and left side of the unit.
2. Insert two AA batteries into each compartment, observing
proper +/– polarities as indicated.
3. Replace the battery compartment covers.
Note: To conserve battery power, the scale shuts off automatically after a few seconds of inactivity.
Battery Installation
10
MODE Setup
To activate the scale, step once on the glass platform, then release.
To select from MODE 1 to MODE 4, press the MODE button. When the MODE changes, it is reported by the voice speaker (when active) and appears on the LCD.
MODE 1 (Weight Measurement)
Weight is measured and displayed silently.
MODE 2 (Height and Weight Measurement)
Height is measured first, followed by weight. Both measurements are reported by the voice speaker (when active) and shown on the LCD.
MODE 3 (Weight Measurement and Weight Comparison)
Weight is measured and reported by the voice speaker (when active) and shown on the LCD. If the preset weight is above 0, the scale compares actual weight versus preset weight and reports the increase or decrease.
Operation
11
MODE 4 (Height Measurement)
Height is measured when activated. The scale makes four attempts to measure height. If the measurement is successful, it appears on the LCD and is stated through the voice speaker. The scale switches off automatically in a few seconds. If the measurement is not successful, the scale switches off immediately.
Preset Weight To set your preset “target” weight, enter MODE 3 and press the
SET button. Preset weight data appears on the LCD. To change a
preset, press the
SET button as needed to reach the desired number. To change the value of the number up or down, press the
+/– button.
Voice Speaker
To switch the voice speaker on or off, press the X button. When the voice speaker is active, a
X appears on the LCD.
Wireless Alignment Board
To calculate height, sound waves from the scale’s Ultrasonic Window reflect off the Wireless Alignment Board and back
Operation
12
again. The board includes a laser light function to ensure accu­rate horizontal orientation.
1. To measure height, place the
WIRELESS ALIGNMENT
BOARD
on top of your head, extending over the scale’s
Ultrasonic Window.
2. To check positioning of the
WIRELESS ALIGNMENT BOARD, place the board horizontally on top of your head and press the
LASER LIGHT button located on top. When board place­ment is flat or horizontal, the laser beam points just in front of the feet of the user. This position produces an accurate height measurement. If the board is tilted up, the beam points further away from the feet; the resulting measurements will be larger than actual height. If the board is tilted down, the beam points on your feet; the resulting measurements will be smaller than actual height.
Note: Height can be measured using any flat object placed on top of your head, although accuracy may suffer due to uncertain horizontal orientation.
Operation
13
Measuring Height On The Scale
During MODE 2 and MODE 4, height measurements can be taken while standing on the scale directly or standing on the floor. To activate the scale, step once on the glass platform, then release. The voice speaker states “Please wait.” The LCD cycles between “ ” “UU”. Do not step on the scale again until the LCD cycle is completed. To measure height, stand on the scale and place the wireless alignment board horizontally on top of your head, extending over the scale’s ultrasonic window. The voice speaker states: “Now, start measuring your height. Please stand upright.” Two short beeps followed by one long beep sig­nals the measurement is complete. The height measurement appears on the LCD and is reported through the voice speaker. For example, if your height is 5' 10", you will hear: “Your height is five feet ten inches.”
Measuring Height From The Floor
To measure height standing on the floor, stand in front of the scale and place the wireless alignment board horizontally on top of your head, extending over the scale's ultrasonic window. The voice speaker states: “Now, start measuring your height.
UU
Operation
14
Please stand upright.” Two short beeps followed by one long beep signals the measurement is complete. The height measurement appears on the LCD and is stated through the voice speaker.
Notes:
If the height measurement fails, the scale automatically re­measures, up to four times. If the height measurement cannot be taken successfully, the scale switches to weight measurement automatically.
Height is measured using the wireless alignment board or any flat object placed on top of your head.
Weight Measurement
In MODE 1, when the LCD shows “0.0”, the scale is ready. Step onto the glass platform with your feet spaced evenly apart and your weight evenly distributed. Stand still and upright until the scale calculates your weight and it appears on the LCD.
In MODE 2 and 3, the voice speaker states: “Now, start measur­ing your weight.” Step onto the glass platform with your feet spaced evenly apart and your weight evenly distributed. Stand still and upright until the scale calculates your weight. When
Operation
15
completed, weight information is reported by the voice speaker and shown on the LCD.
Evaluating Increased/Decreased Weight
In MODE 3, with your preset target weight set, the scale com­pares actual weight to your target weight and reports the differ­ence. For example, if your preset weight is 130 lbs. and your current weight is 135 lbs., the scale states: “You are five pounds over your goal.”
Note: If preset weight is 0, the scale will not evaluate weight difference.
Operation
16
Ensure that you do not step on the scale until the LCD indi­cates that it is ready.
If “OF” appears on the LCD, this indicates the scale is over­loaded.
If “----”, “L000” or “Err” appear on the LCD, this indicates a scale malfunction. Ensure that the scale is on a flat, level floor and not touching a wall. To restore normal function, turn the scale off, then back on again.
Ensure the batteries are installed properly. If the scale still does not function properly, replace the batteries.
If the voice speaker volume becomes low, this indicates weak batteries. Replace batteries.
Troubleshooting
17
Scale range
Height: 2.3~7.5 ft, subscale 0.5inch
Weight: 4.4 ~ 440.9 lbs., subscale 0.5lbs.
Batteries: Four AA batteries
Product Dimensions: 15" x 11" x 2"
Total Weight: 6 lbs.
Relative Humidity Range: RH45% ~ 90%
LASER RADIATION
DO NOT STARE INTO BEAM
CLASS II LASER
PRODUCT
Specifications
18
19
What Is Covered
This warranty covers any defects in materials or workmanship, with the exceptions stated below.
How Long Coverage Lasts
This warranty runs for 90 days from the date of original purchase.
What Is Not Covered
This warranty does not cover damage caused by misuse or use other than as intended and described in the product instruction manual, or loss or damage to batteries or removable parts.
What The Sharper Image Will Do
The Sharper Image will repair any defects in materials or workmanship. In the event repair is not possible, The Sharper Image will either replace this product with one of similar features and price, or refund the full purchase price of the product, whichever you prefer.
How to Obtain Service
Return the product and receipt, along with a brief explanation of the problem, to:
T.S.I. - Returns Department 2901-A West 60th Street Little Rock, AR 72209
If you have questions please feel free to contact our customer service representatives at 1-800-344-5555 or by email at care@web.sharperimage.com.
This warranty gives you specific legal rights, and you may have other legal rights that vary from state to state.
© 2005 Sharper Image Corporation
Sharper Image Corporation 650 Davis St., San Francisco, CA 94111 (415) 445-6000
Shop online:
Due to continuing improvements, actual product may differ slightly from the product described herein. V1 02/05
Warranty
Loading...