Sharper image SBT1003 User Manual

Sound Responsive Mini Tower Speaker

User Guide

SBT1003

In the boxIn the box

Sound Responsive Mini Tower Speaker

User Guide

SBT1003

Sound Responsive Mini

Tower Speaker

AUX-IN Cable

Remote
Control

AC Adapter

Powering the speakerPowering the speaker

1. Connect the pin of the AC adapter into the DC 5V
port on the back of the speaker.

2. Connect the plug of the AC adapter into an outlet.

3. Switch the Power switch to the ON position.

Speaker

AC Adapter

User Guide

Outlet

Location of ControlsLocation of Controls

FRONT

2

3

1

BACK

4 5 6

1. LED equalizer display

2. LED indicator light

3. Remote control sensor

4. AUX IN port

5. DC5V port

6. Power ON/OFF

7. LED equalizer display ON/OFF switch

REMOTE CONTROL

1

2

3

4

1. [ ] button: Power ON/OFF

2. [ ] button: Pause/play music

3. [ ] button: Skip to next song

4. [ ] button: Skip to previous song

5. [ ] button: Bluetooth pairing

6. [ ] button: Mute volume

7. [VOL+] button: Increase volume

8. [VOL-] button: Decrease volume

Pairing the speaker with a Bluetooth

Pairing the speaker with a Bluetooth
enabled device

enabled device

1. Turn the speaker ON. A tone will be heard and
the LED indicator light will ash quickly,
indicating the unit is in pairing mode.

2. Keep the speaker and Bluetooth enabled device
within 3 feet of each other during the pairing
process.

3. Set your Bluetooth enabled device to search for
discoverable Bluetooth devices.

If there are no paired devices in range when the
speaker is turned on, it will go into pairing mode
automatically. If a paired device is in range, the
speaker will connect to it automatically.

SIDE

7

5

6

7

8

Pairing the speaker with a Bluetooth

Pairing the speaker with a Bluetooth
enabled device (cont’d)

enabled device (cont’d)

On an iPhone

• Go to SETTINGS > BLUETOOTH
(Make sure Bluetooth is turned ON)

12:12 PM

Bluetooth

Bluetooth

Devices

SBT1003

Now discoverable

ON

Paired

On a Blackberry

• Go to SETTINGS/OPTIONS > BLUETOOTH

• Enable BLUETOOTH

Bluetooth

Bluetooth:

Discoverable:

Paired Devices

Add New Device

SBT1003

3G

On

Yes

On an Android Phone

• Go to SETTINGS > BLUETOOTH
Search for devices (Make sure Bluetooth is

turned ON)

Bluetooth settings

Bluetooth

Device name

SBT1003

Visible

Make device visible

Search for devices

Bluetooth devices

12:12 PM

Scanning

On other Cell Phones/Devices

• Review the instruction manual that came
with your phone/device.

Bluetooth: Enabled

Paired Devices:

*Empty *

Searching for devices

ound

1 f

Stop

4. When your Bluetooth enabled device nds
the speaker, select “SBT1003” from the list of
found devices.

5. If required, enter the password 0000. Select
OK or YES to pair the two units.

6. After a successful pairing, a tone will be
heard and the LED indicator light will stop
ashing and remain solid.

Pairing the speaker with a Bluetooth

Pairing the speaker with a Bluetooth
enabled device (cont’d)

enabled device (cont’d)

NOTE: If you would like to connect the

speaker to another device, you must unpair
the unit from the currently paired device rst.
On your device’s Bluetooth settings, select
“SBT1003”, then select “unpair”; or press [ ]
on the remote control. The speaker will return
to pairing mode.

The screenshots above are typical of many Bluetooth
enabled devices in the market today, and are used
to assist in the explanation of the pairing process.
Your Bluetooth enabled device’s interface and
interaction with the speaker may dier slightly
from the illustrations shown.

Using the speakerUsing the speaker

Powering ON/OFF

Turn the speaker ON and OFF by using the Power
ON/OFF switch on the back of the unit or pressing
the [ ] button on the remote control.

Turning the LED Equalizer Display ON/OFF

To turn the LED equalizer display ON and OFF, use
the switch located on the side of the base of the unit.

The LED Equalizer display on the front of the
speaker reacts to the volume level of the music
being played. When the volume is low, the LED
Equalizer will not function. Only when the
volume is turned up will the LED Equalizer
start to function. It will display according to
the volume level.

Playing musicPlaying music

Playing music wirelessly

To enjoy listening to music wirelessly on the
Sound Responsive Mini Tower Speaker, make sure
you are connected to a Bluetooth enabled device.
Once connected, press PLAY on your Bluetooth
device. After playback starts, you can control the
music and volume with your connected device or
the remote control (with devices that have the
AVRCP Bluetooth prole).

Play/Pause

Press the [ ] button on the remote control to
pause the music. To resume music playback, quick
press the [ ] button again.

Skipping Songs

• Press the [ ] button on the remote control to
skip to the previous song.

• Press the [ ] button to on the remote control to
skip to the next song.

Adjusting the volume

• Quick press the [VOL+] button on the remote
control to gradually increase the volume; press
and HOLD to continually increase the volume to
maximum level.

• Quick press the [VOL - ] button on the speaker or
the remote control to gradually decrease the
volume; press and HOLD to continually decrease
the volume to minimum level.

• Press the [ ] button on the remote control to
mute the sound. Press again to turn the sound
back on.

Using as a wired speakerUsing as a wired speaker

1. Connect one end of the 3.5mm auxiliary cable
to the AUX IN port of the speaker and the other
end to an external device’s headphone port
(smartphone, MP3 player or tablet).

3. Open a media player on your device and press
PLAY to start playing your music.

4. Use the controls on your connected device to
control music playback and volume.

Troubleshooting TipsTroubleshooting Tips

I can pair the Sound Responsive Mini Tower

Speaker speaker with my Bluetooth device, but I
cannot hear any music.

1. Turn up the volume on your Bluetooth device.

2. You may have to unpair the speaker, then re-pair
to your device.

I cannot get the Sound Responsive Mini Tower

Speaker into Pairing mode.

1. Make sure the unit is turned ON.

2. A tone will be heard and the LED indicator light
will ash quickly.

3. The speaker is now in pairing mode.

My Bluetooth device is not able to pair with the

Sound Responsive Mini Tower Speaker.

1. Turn the speaker ON. A tone will be heard and
the LED indicator light will ash quickly,
indicating the unit is in pairing mode.

2. Keep the speaker and Bluetooth enabled
device within 3 feet of each other during the
pairing process.

3. Check that YOUR device’s Bluetooth feature is
turned ON.

4. Try repeating the pairing process. See “Pairing
the speaker with a Bluetooth enabled device.”

Legal informationLegal information

Caution: Any changes or modications not expressly approved could
void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment o and on, the user is encouraged to try to correct
the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from

that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Limited Warranty

90 Days Limited Warranty

In the unlikely event that this product is defective, or does
not perform properly, you may within ninety (90) days from
your original date of purchase return it to the authorized
service center for repair or exchange.

TO OBTAIN WARRANTY SERVICE:

●

Call the Customer Support number located below, or go

to our website portal to receive an SRO number.

● Provide proof of the date of purchase within the package
(Dated bill of sale).

● Prepay all shipping costs to the authorized service center,
and remember to insure your return.

● Include a return shipping address (no P.O. Boxes), a
telephone contact number, and the defective unit within
the package.

● Describe the defect or reason you are returning the
product.

Your product will be repaired or replaced, at our option, for
the same or similar model of equal value if examination by
the service center determines this product is defective.
Products received damaged as a result of shipping will
require you to le a claim with the carrier.

The shipping address of the authorized service center is:

 Southern Telecom, Inc.
Attention: Customer Service (2nd Floor)
14-C 53rd Street
Brooklyn, NY 11232

Should you have any questions or problems concerning this
product, please contact our customer service department at:

Customer Support:
Phone: [phone]
Monday-Friday 8AM-10PM(EST)

www.southerntelecom.com
Click on “Product Support”

Warranty service not provided

This warranty does not cover damage resulting from
accident, misuse, abuse, improper installation or operation,
lack of reasonable care, and unauthorized modication. This
warranty is voided in the event any unauthorized person
opens, alters or repairs this product. All products being
returned to the authorized service center for repair must be
suitably packaged.

Limitation of Warranty:

• THE WARRANTY STATED ABOVE IS THE ONLY WARRANTY

APPLICABLE TO THIS PRODUCT. ALL OTHER WARRANTIES,
EXPRESS OR IMPLIED (INCLUDING ALL IMPLIED WARRANTIES
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE) ARE HEREBY DISCLAIMED. NO VERBAL OR
WRITTEN INFORMATION GIVEN BY AIT, INC. ITS AGENTS, OR
EMPLOYEES SHALL CREATE A GUARANTY OR IN ANY WAY
INCREASE THE SCOPE OF THIS WARRANTY.

• REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS

WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER.
AIT, INC. SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSE­QUENTIAL DAMAGES RESULTING FROM THE USE OF THIS
PRODUCT OR ARISING OUT OF ANY BREACH OF ANY
EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. THIS
DISCLAIMER OF WARRANTIES AND LIMITED WARRANTY ARE
GOVERNED BY THE LAWS OF THE STATE OF NEW YORK.
EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW,
ANY IMPLIED WARRANTY OF MERCHANTIBILITY OR FITNESS
FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED
TO THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE.

Some states do not allow the exclusion nor limitation of
incidental or consequential damages, or limations on how
long an implied warranty lasts so the above limitations on
exclusions may not apply to you. This warranty gives you
specic legal rights, and you also may have other rights that
vary from state to state.

Sharper Image® name and logo are registered trademarks. Manufactured
and marketed by Southern Telecom under license. © Sharper Image.
All Rights Reserved.