Sharper Image Night Light Toilet Seat User Manual

Made in China For more information on Sharper Image products, please visit: www.sharperimage.com

FRONT

100% Scale

1-Color Process - Black

FOLD

21.25 IN.

sound activated

NIGHTLIGHT TOILET SEAT

with slow-close hinge

ROUND

1 YEAR LIMITED WARRANTY

Thank you for purchasing the Sharper Image® Seat. LED technology softly lights your way to the bathroom at night. The Sound Activated Auto On and O features allows the LED to operate only when you need it. The slow-close hinge helps prevent the lid and ring from slamming down and waking the house, and the quick release hinge makes cleaning a breeze.

• Read all instructions carefully before use.

• Carefully remove all contents from the packaging and inspect the product to make sure all components have been received.

• Tools Required: Phillips head screwdriver

Nightlight Toilet

LED Light Module

Slow Close/Quick Release Hinge

Battery Compartment

2x AAA batteries are required

GETTING STARTED

Battery Installation

1) The nightlight operates on 2 x AAA (LR03) batteries (not

included).

2) Lay the toilet seat on a ﬂat surface with the lid and ring in the open position as shown.

Read all instructions very carefully BEFORE installation.

1) Remove old toilet seat and mounting hardware from toilet bowl.

2) Remove new mounting hardware from parts bag. Insert the 2 Plastic Mounting Sleeves (A) into the mounting holes on your toilet bowl by squeezing the 2 plastic arms together with your thumb and foreﬁnger.

a) If you are having diculty

2a.

2c.

7) If the metal pins do not line up with the holes in the toilet seat, loosen

Bolt (D) and twist the Hinge Pin Mount (C)

until they line up with the holes. Retighten the Bolts (D) until they are snug, but do not fully

tightened yet.

getting the plastic sleeve into the hole, insert the plastic sleeve into the hole at an angle and rock it

Remove the 2 Phillips head screws from the LED housing. Remove and open the LED housing.

Install 2 x AAA batteries with polarity (+/-) as shown in FIGURE 1.

Make sure the silicone water seal is seated in place, close the LED housing, place back into the toilet lid and tighten screws. Do not over tighten.

BATTERY INSERTION

FIGURE 1.

back and forth as you push it down.

b) Remove the Bolt (D) from the

plastic sleeve.

c) Push the sleeve all the way

into the hole until the ﬂange is ﬂush with the top of the bowl.

d) If the ﬁt is tight, use the handle

of the screwdriver to forcibly

2d.

push the sleeve down until it is completely ﬂush with the bowl.

3) Insert the Rubber Gasket (B) into the

plastic bottom of each Hinge Pin Mount (C).

4) Place the Hinge Pin Mount (C) over the

CAUTION:

• Do not mix old and new batteries or batteries of dierent

types: alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium).

• Insert batteries with correct polarity as indicated inside the battery compartment.

• Remove batteries during long periods of non-use.

• Always remove exhausted batteries from this product.

Dispose of batteries safely.

Plastic Mounting Sleeve (A) in the

position shown below.

5) Insert Bolt (D) into Plastic Hinge Mounting Sleeve (A)

and tighten to a snug ﬁt only. DO

NOT FULLY

8) Gently place the toilet seat over the Hinge Pin Mounts (C). Allow the

toilet seat to gently close.

9) Check the alignment of the toilet seat with the toilet bowl. If the seat is too far forward or too far back or too far left/right, remove the seat and readjust the Hinge Pin Mounts (C). You can adjust the seat forward or back using the slot in the Hinge

Pin Mounts (C).

10) Once the toilet seat is

aligned with the bowl, gently remove the seat and fully tighten the bolts securely with a Phillips head screw driver.

TIGHTEN THE

11) The plastic sleeves should look as shown in image.

Plastic Mounting

Sleeve

Rubber Gasket

Hinge Pin

Mount

BOLTS YET. The metal pins need to be equally spaced 4 ¾” apart as shown in Figure 5.

6) To check the spacing, place the toilet seat

Protective CapBolt

upside down on the bowl so that the mounting holes in the seat line up with the

12) Place the Protective Caps (E) over the Hinge Pin Mounts (C)

and push down securely.

metal pins.

9a.

9b.

11.

13) Now click the toilet seat onto the Hinge Pin Mounts (C) and check

13.

for proper function and alignment with the toilet bowl.

To remove the seat for cleaning,

14)

simply press the gray button and pull up on the seat. Once cleaning is complete, align the hinge holes to the hinge pins and press down ﬁrmly to secure the seat to the toilet bowl.

14.

CLEAN

PRESS

CLEAN

PRESS TO

SECURE

HAVING TROUBLE INSTALLING YOUR SEAT?

Check out our instructional video for the Sharper Image Sound Activated Nightlight Toilet Seat at https://youtu.be/uP9nEbiFam0

NIGHTLIGHT FUNCTION

The LED will only turn ON when it is dark or night time. The LED will turn ON

when it detects a sound of someone entering the bathroom (Approximately 65 dB). It provides a soft blue glow that illuminates the toilet lid and ring and is easy on your eyes in the middle of the night. The LED will automatically shut o after 2 minutes. The batteries will last about 6 months.

QUICK RELEASE HINGES

The seat has a quick release feature to help you remove it for easy cleaning. To remove the seat, simply press the gray button on the back of the seat and pull up the seat. To put the seat back on, reverse the steps above. The toilet seat will snap back onto the hinges.

CLEANING AND MAINTENANCE

• Clean the toilet seat as you normally would with bathroom cleaner and water. Dry with soft cloth.

• The LED housing is water resistant. DO NOT SUBMERGE THE LED HOUSING.

Model No: 01271

ONE YEAR LIMITED WARRANTY

Ginsey Home Solutions sells its products with the intent that they are free of defects in manufacture and workmanship for a period of one year from the date of original purchase. Ginsey Home Solutions warrants that its products will be free of defects in material and workmanship under normal use and service.

For warranty service call:

Ginsey Home Solutions 2078 Center Square Road Swedesboro, NJ 08085 1-800-257-7844 service@ginsey.com

Customer Service is available

8:30am – 5:00pm (EST)

Monday – Friday

©2018 Sharper Im age. Sharpe r Image® name and lo go are regist ered tradem arks. All right s reserv ed. Manufac tured, markete d and distribu ted under lic ense by Ginsey H ome Solutio ns, Swedesb oro, NJ 08085 .

11 IN.

TOILET SEAT INSTALLATION

100% Scale

FRONT

1-Color Process - Black

QUICK START GUIDE

NIGHTLIGHT TOILET SEAT

Plastic Mounting

Sleeve

Rubber Gasket

Read all instructions very carefully BEFORE installation.

STEP 1.

Insert the 2 Plastic

Mounting Sleeves (A) into

the mounting holes on your toilet bowl by squeezing the 2 plastic arms together with your thumb and foreﬁnger.

Remove the Bolt (D) from

the plastic sleeve.

Push the sleeve all the

way into the hole until the ﬂange is ﬂush with the top of the bowl.

sound activated

with slow-close hinge

ROUND

Hinge Pin

Mount

Protective CapBolt

11 IN.

STEP 2.

Insert the Rubber Gasket (B) into the plastic bottom of

each Hinge Pin Mount (C).

Place the Hinge Pin

Mount (C) over the Plastic Mounting Sleeve (A) in the

position shown below.

STEP 3.

Insert Bolt (D) into Plastic Hinge Mounting Sleeve (A)

and tighten to a snug ﬁt only. DO NOT FULLY TIGHTEN THE BOLTS YET. The metal pins need to be equally spaced 6 ¾” apart as shown.

STEP 4.

If the metal pins do not line up with the holes in the toilet seat, loosen Bolt (D) and twist the Hinge Pin Mount (C) until they line up with the holes. Retighten the Bolts

(D) until they are snug, but do not fully tightened yet.

FOLD

STEP 5.

Check the alignment of the toilet seat with the toilet bowl. If the seat is too far forward or too far back or too far left/right, remove the seat and readjust the Hinge Pin Mounts (C). You can adjust the seat forward or back using the slot in the Hinge Pin Mounts (C).

Once the toilet seat is aligned with the bowl, gently remove the seat and fully tighten the bolts securely with a Phillips head screw driver.

8.5 IN.

STEP 6.

Place the Protective Caps (E) over the Hinge Pin Mounts (C) and push down securely.

Now click the toilet seat onto the Hinge Pin Mounts (C) and check for proper function and alignment with the toilet bowl.

HAVING TROUBLE INSTALLING YOUR SEAT?

Check out our instructional video for the Sharper Image Sound Activated Nightlight Toilet Seat at https://youtu.be/uP9nEbiFam0

Gently place the toilet seat over the Hinge Pin Mounts (C). Allow the toilet seat to gently close.

SCAN FOR VIDEO

Made in China For more information on Sharper Image products, please visit: www.sharperimage.com