Sharper Image LI111 Instructions Manual
Portable Mini
Cycle
LI111 Instructions
Read and save these instructions.
Dear Sharper Image Customer,
Thank you for your purchase of a Sharper Image product. We appreciate
your business very much.
Please accept my personal assurance of your complete satisfaction with
this product’s quality and performance. We offer generous return
privileges and excellent warranties on all our products.
For more than 25 years, The Sharper Image has shared the fun of
discovering innovative products that make life easier and more enjoyable. We’ve been in business a long time because we are an exciting
place to shop and — just as importantly — we strive to deliver great
customer service that exceeds your expectations.
Enjoy your purchase!
Respectfully,
Richard Thalheimer
Founder, Chairman and Chief Executive Officer
Call 1-800-344-4444 for 24-7 ordering and customer service,
or go to , our complete online store.
•Do not expose unit to direct sunlight for long periods of time.
•Protect from water and wear and tear.
•Batteries may need to be replaced if LCD fades or flashes.
Always use fresh batteries.
Assembly
Front stabilizer has two holes. Orient front stabilizer. Use a
wrench or ratchet (13 mm) to secure the carriage bolts and
round-tip hex nuts, attaching the front stabilizer to the main unit
with flat part of rubber feet facing the floor. Make sure the carriage bolts do not spin as you tighten the hex nuts.
Rear stabilizer (facing tension dial) has only one hole in the
center. Use a screwdriver to attach stabilizer to main body with
flat parts of rubber feet facing the floor.
Screw right and left pedals onto pedal arms. Be sure to mount
right pedal on right side and left pedal on left side (pedals are
marked with R and L).
Warning
Loading...