Sharper Image LED Headband Cleaning User Manual

LED HEADBAND

Item No. 206954

User Guide

Thank you for purchasing the Sharper Image LED Headband. Please take a moment to read
this guide and store it for future reference.

- 1 -

FEATURES

• 3 light modes

• Made of 90% Polyester and 10% Spandex

• Built-in rechargeable LED light

• Operates on a 3.7V 250mAh rechargeable li-polymer battery

HOW TO USE

• Press the ‘ON/OFF’ switch on the LED light to cycle through the following functions: On / Normal
Light / Blinking / Off.

HOW TO CHARGE

Before initial use, fully charge the battery, this typically takes 1.5 hours. Charge the LED Headband
using a USB charger (not included). The battery contained within the head lamp may only be partially
charged when unpacked.

ON/OFF PUSH BUTTON

USB CHARGER COVER

USB CHARGER PLUG

• To remove the lamp unit, pull the head lamp rim open and push the lamp out from the headband.
Then pull off the USB charger cover.

• Plug the head lamp USB charger plug into the corresponding socket of the USB wall charger
(not included) or 12V USB car charger socket (not included), power bank or similar device with
minimum DC5V 1000 mAh output USB socket.

• The battery indicator light will illuminate white while charging. When the battery is fully charged,
the indicator light will turn off.

LED LIGHT RUN TIME

• Low: Up to 6 hours

• Medium: Up to 3 hours

• High: Up to 1.5 hours

• Charge time: 100 minutes

CARE AND MAINTENANCE

• Switch the device off and disconnect the charger from the socket before cleaning.

• Charge the battery fully at regular intervals, when the device has not been in use to ensure

• optimum battery life.

• Clean the product with a soft, dry cloth. Do not use any form of abrasive cleaner or solvents to

• clean the unit. Never dip the head lamp into liquids.

• Store the device in a clean, dry and dark place. Do not expose it to temperatures of under 5° F for
long periods of time.

- 2 -