Sharper Image Heated Physiotherapy Massager User Manual

HEATED PHYSIOTHERAPY MASSAGER

Item No. 205471

User Guide

Thank you for purchasing the Sharper Image Heated Physiotherapy Massager. This user’s
manual provides important information for operation and safety. Please read this manual
carefully and understand it thoroughly before operation. Keep this manual for future
reference.

NOTE: This device is not intended for medical use. It is intended only to provide a relaxing
massage at home.

- 1 -

FEATURES

• Infrared Light and Heat Therapy (700~50,000nm wavelength)

• Adjustable temperature 40°- 65°C (104°F-149°F)

• Magnetic Therapy (2X magnets, 1,100 gauss)

• Vibration Massage (7,000 RPM)

• Detachable and adjustable straps for elbow, shoulder and knee

• Includes three straps [1X 100cm, 2x 35cm]

• Includes a protective pad

• Temperature memory function

• Auto timer shuts off after 30 minutes

• Plugs into an AC outlet

Start / Stop

PRODUCT PARTS

On/Off Vibration

Up/Down Temp.

Control

Magnets

Warming Lights

Infrared Lights

Magnets

AC Power Jack

Control Panel

Strap Buckles

HOW TO OPERATE THE HEATED PHYSIOTHERAPY MASSAGER

1. Place the comfort padding cover on the knee.

2. Put the massager on the top of the comfort padding cover with the control panel facing up.

3. Adjust the straps until it fits your knee properly when buckled.

4. For best results, always attach the massager to the curve of knee as close as possible.

5. Connect the AC power cable to the device and plug the adapter into a wall outlet.

6. The LED light on control panel will turn on, and the LED screen will show “--”.

7. To turn on the Infrared Heat function, press the Start/Stop button once on the control panel.
The Infrared Therapy will start working, and the LED screen will show 40°C (104°F, the default
minimum temperature).

8. Press the UP or DOWN button on the Control Panel to set your preferred temperature
(maximum of 65°C, 149°F). The thermostat control system automatically adjusts based on
the heat level. The device will stop warming up when it reaches the preset temperature and
restart when it falls below your preset temperature. (Note: The warming lights will turn on and
off during heating). If you do not want heat therapy, you may choose to have only infrared light
therapy. Press the DOWN button to reduce the temperature to its minimum level, and this
device will work with only infrared light therapy.

9. To turn off the Infrared Heat function, press Start/Stop button once again on the control
panel. The LED screen will show “--”.

10. Press the On/Off Switch turn on Vibration Massage. (The On/Off Switch is located on the left
side, underneath the massager.)

- 2 -