Sharper Image EW001 Instructions Manual
Soft-Touch
6-In-1
Wireless
IR Remote
EW001
Instructions
Read and save
these instructions.
Dear Sharper Image Customer,
Thank you for your purchase of a Sharper
Image product. We appreciate your business very much.
Our goal is that you will be completely
satisfied with this product’s quality and
performance. We offer generous return
privileges and excellent warranties
on all our products.
Since 1977, The Sharper Image has
shared the fun of discovering innovative
products that make life better and more
enjoyable. We’ve been in business a long
time because we are an exciting place to
shop and — just as importantly — we
strive to deliver outstanding customer
service that exceeds your expectations.
Enjoy your purchase!
Call 1-800-344-4444 for order-
ing and customer service, or visit
,
our award-winning Website.
Table of Contents
Introduction ....................................4
Battery Precautions
Handling and Usage
.....................4
Installing Batteries
...........................5
Entering a Code Manually
...............6
Entering a Code (PowerScan)
..........7
Code List (3-Digit Codes)
................ 9
Introduction
The Soft-Touch 6-In-1 Wireless IR Remote can operate up to six different
machines. One device controls your
TV, DVD, VCR, audio, satellite and
cable. The database supports up to
500 different brands and models. An
EL backlight automatically illuminates
the controls when it’s picked up. The
remote also allows you to conduct an
automatic or manual code search for
a particular device. You may need to
review the operating manuals of your
original devices to refresh yourself
regarding the functions of those units.
Battery Precautions —
Handling and Usage
WARNING: Only adults should
handle batteries. Do not allow a child
to use this product unless the batterycompartment cover is securely
attached to the battery compartment,
in accordance with all product
instructions.
• Follow the battery manufacturer’s
safety and usage instructions.
• Keep batteries away from children
and pets.
• Do not mix a used battery with a
new battery, or mix different sizes
of batteries together.
4
Battery Precautions —
Handling and Usage
• Insert the batteries, observing
proper polarities (+/–) as indicated
inside the battery compartment.
Failure to properly align the battery
polarities can cause personal injury
and/or property damage.
• Remove exhausted or discharged
batteries from the product. If you
are not going to use it until a later
time, remove the batteries.
• Never throw batteries into a fire.
Do not expose batteries to fire or
other heat sources.
• Dispose or recycle exhausted/
discharged batteries in compliance
with all applicable laws. For de
tailed information, contact your
local solid waste authority.
Installing Batteries
1. Remove the battery compartment
cover located on bottom of unit.
2. Insert 4 AA alkaline batteries
(purchase separately), according
to the diagram inside the battery
compartment.
3. Replace battery compartment
cover.
5
Installing Batteries
4. Press the button. The LED
should illuminate. If it doesn‘t,
check the batteries and try again.
Entering a Code Manually
1. Turn on the device (TV, VCR,
DVD, SAT, CAB, AUD) you wish to
program manually.
2. Use the code tables in the back
of this manual to locate the list of
codes for the brand name of the
device you wish to program.
3. Press and hold the button for the
device you wish to program (TV,
VCR, DVD, SAT, CAB, AUD) for
more than three seconds; the red
LED will illuminate. This indicates
that the remote control is ready to
accept a 3-digit code.
4. Within 30 seconds, enter the
3-digit code listed for your brand
of device; the LED shuts off. This
indicates that the remote control
is programmed.
5. Press the ON/OFF Button to verify
correct code entry. If the device
shuts off, no further programming
is required.
6
Entering a Code Manually
6. If the device does not respond,
repeat steps 2-5, using a different
3-digit code listed for that device.
Note: If your device does not
respond, try all the codes for your
brand. If the codes do not work or
your brand is not on the list, try the
Power Scan programming.
Entering a Code (PowerScan)
With PowerScan programming, the
remote control tests all the codes
available in the code list and assigns
the correct code for the selected de
vice. Although this method may take
longer, it eliminates the need to look
up codes and enter them manually.
1. Manually turn off the device you
wish to program (TV, VCR, DVD,
SAT, CAB, AUD).
2. Press and hold the appropriate
button (TV, VCR, DVD, SAT, CAB,
AUD) until the red LED illumi
nates. This indicates the remote
control is in programming mode.
3. Press and release the
button.
The LED flashes once and stays
on, indicating that the remote is in
PowerScan mode.
7
Entering a Code (PowerScan)
4. Press either the CH+ or CH-
button repeatedly until the device
switches on. The CH+ button
searches up in the code list; the
CH– button searches down.
5. When the device turns on, press
and release the
SELECT button
to store the new code and exit.
To exit without setting the code,
press the CLEAR Button.
Note: If you press CH+ or CH– again
after the device turns on, the device
will not be programmed; you will
need to repeat steps 1-5 again.
6. As a test, press
VOL+ or VOL–
button. If the device responds, no
further programming is required.
If the device does not respond,
repeat steps 1-5.
Note: If your device does not
respond after trying all codes avail
able in the code list, this remote may
not support your device. Contact
Customer Service for assistance.
Reminder: If you find your device,
e.g. TV, is not fully controllable by
the remote control, you may have
set the code number incorrectly or
there may be some newer models of
devices that have not been entered in
the code list.
8
Entering a Code (PowerScan)
Enter another code number manually
for the same brand. Or you can
use the PowerScan function (i.e.
auto search) to find the channel.
For details, refer to the Programming
sections of this manual.
Sometimes you may enter the right
codes, but the viewing channel can
not be changed. Because some TV
models may use other methods to
enter the channel number, press the
-/-- and the ENTER button to change
the channel.
Code List (3-Digit Codes)
TV
TV
A Mark 134
Action 108
Admiral 071 093 099 118 127 130
131
Advent 147
Aiko 079
Aiwa 047
Akai 104 105 123
Amtron 082
Anam 106
Anam National 072 082 110
AOC 073 074 075 104 112 117
134 140
9
Apex 000 001 015 016
Audiovox 082 108 140 144
Bell & Howell 071 084 118 131
Benq 051
Broksonic 037 038 104 106 118 138
146
Carver 153
CCE 118
Centurion 077
Citek 143
Citizen 073 075 079 082 089 092
138
Classic 104 123
Colortyme 073 075 105 116 118 125
127 139
Contec Cony 106 108
Contec/Cony 078 082
Craig 082 106 108 114 119 125
138
Crosley 118 153
Crown 082 087 119 134
CTX 056
Curtis 104
Curtis Mathes 070 073 075 084 089 092
102 105 112 117 118 125
127 134 135 148 153 155
Daewoo 073 074 075 079 092 104
110 112 117 134 135 140
144
Daytron 073 075 092 114 117 134
140
Denon 145
10
Code List (3-Digit Codes)
Code List (3-Digit Codes)
Dimensia 070 155
Dumont 073 091
Electrohome 072 073 075 080 104 105
117 134
Emerson 073 075 078 081 082 083
084 092 096 103 104 105
106 108 114 117 119 125
129 130 131 134 139 144
146
Envision 073 075 105 112
Fisher 052 084 115 123 124 133
Fujitsu 083
Funai 082 083 106 108
GE 009 066 067 070 072 073
075 085 086 104 106 110
113 116 117 125 126 127
128 134 144 149 154 155
Goldstar 073 074 075 078 080 092
104 105 109 112 117 134
135 137
Gradiente 105 122 123
Granada 134
Grundig 126 134
Hallmark 073 075 104
Harman Kardon 104
Hisense 151
Hitachi 041 042 058 059 068 073
075 078 101 117 126 127
131 134 140 145
Infinity 087 153
Janeil 094
JBL 087 153
11
Loading...