Sharper Image Digital Laser Tape Measure User Manual

SELECT INSIDE / OUTSIDE MEASUREMENT

2-IN-1 DIGITAL LASER TAPE MEASURE

Item No. 206987

User Guide

Thank you for purchasing the Sharper Image 2-in-1 Digital

Laser Tape Measure. Please take a moment to read this guide

and store it for future reference.

AUTO SHUT-OFF

The 2-in-1 Digital Laser Tape Measure will shut off after 5 minutes
of non-use. To turn the device back on, simply pull out the tape
blade a few times to activate.

BACKLIGHT ON LCD

The backlight on the LCD screen will activate for 30 seconds when
the tape is pulled out or when a button is pressed.

DIGITAL FUNCTION

All digital functions are applied to laser mode as well as
tape measure mode.

CHANGE TO TAPE MEASURE MODE FROM LASER MODE

Simply pull the tape out and select tape mode.

BATTERY CHARGING

OPEN

CHARGE PORT COVER

LED INDICATOR

RED: CHARGING
GREEN: FULLY CHARGED

CHARGE

WITH USB (MICRO 5-PIN

)

DUAL MEMORY (RECORD

CLICK M1+ TO RETAIN

CLICK M2+ TO RETAIN

DUAL MEMORY (RECALL

PRESS MR FOR 1 SECOND

TO RECALL

PRESS FOR

1 SECOND

)

)

LOCK

RELEASE

CLICK HOLD TO RETAIN
LAST MEASUREMENT.

CLICK HOLD AGAIN TO
RESUME MEASURING.

SELECT / CONVERT UNITS

BLADE LOCK

HOLD FUNCTION

LASER DISTANCE METER MODE (SINGLE MEASUREMENT

CLICK MODE BUTTON TO CHANGE TO

LASER DISTANCE METER MODE.

CLICK MODE BUTTON AGAIN,

LASER DOT APPEARS ON THE OBJECT

AND LASER IS READY FOR SINGLE

MEASUREMENT.

CLICK MODE BUTTON TO

CAPTURE MEASUREMENT

LASER DISTANCE MEASUREMENT (CONTINUED

PRESS MODE BUTTON FOR 1 SECOND
DURING SINGLE LASER METER MODE TO
CHANGE TO CONTINUOUS METER MODE.

CLICK MODE BUTTON AGAIN,

LASER DOT APPEARS ON THE OBJECT

AND LASER IS READY FOR CONTINUOUS

MEASUREMENT.

CLICK MODE BUTTON TO CAPTURE
MEASUREMENT. USE CONTINUOUS

MEASUREMENT BY MOVING THE

LASER BACK AND FORTH.

)

)

CLICK IN/CM

MIDPOINT

PRESS FOR

1 SECOND

CLICK AGAIN FOR
1 SECOND TO RELEASE

MIDPOINT

WARRANTY / CUSTOMER SERVICE

Sharper Image branded items purchased from SharperImage.
com include a 1-year limited replacement warranty. If you have any
questions not covered in this guide, please call our Customer Service
department at 1 [phone]. Customer Service agents are
available Monday through Friday, 9:00 a.m. to 6:00 p.m. ET.

The SHARPER IMAGE® name and logo are registered trademarks.

©Sharper Image. All Rights Reserved.