S H
11
P E I I M
11
E®
NIGHT/DAY ANTI-GLARE VISOR (SET OF 2
Item No. 207365
User Guide
)
Thank you for purchasing the Sharper Image Night/Day Anti-Glare Visor (Set of
2). Please read these instructions prior to using this device for the first time. In
addition, please store this guide for future reference.
- 1 -
OVERVIEW
The Sharper Image Night/Day Anti-Glare Visor clips onto any vehicle’s sun visor to help
you see better at night, and shield your eyes from the sun during the day.
ASSEMBLY AND INSTALLATION
1. Install 4 small screws with a screwdriver.
2. Install 1 big screw with a screwdriver.
3. Press the circle button and pull the telescoping boom to adjust the length so it can
fit over the existing sun visor.
4. Position the boom grips over the sun visor and press down on the booms to secure
into place. Remove the plastic film from both visors.
5. Press down on the side to properly align the visors.
Telescopic boom
Button
Track
Button
6. When selecting your visor, rotate both plates 180°. Once you select your visor (sun
or night), fold the other visor up.
Rotate
Sun Visor
(Gray)
Night Vision
(Yellow)
Night Vision
(Yellow)
- 2 -
Sun Visor
(Gray)
7. The angles of the visors can be adjusted 180° (vertically) and 360° (horizontally) to
assist with oncoming headlights and glare.
Horizontal Rotation
360º
Vertical Rotation
180º
8. If the screws loosen, you can open up the caps and tighten them.
-
Turn to adjust
the firmness
J
9. When not in use, fold both visors into the up position.
WARRANTY/CUSTOMER SERVICE
Sharper Image branded items purchased from SharperImage.com include a 1-year
limited replacement warranty. If you have any questions not covered in this guide,
please call our Customer Service department at 1 (877) 210-3449. Customer Service
agents are available Monday through Friday, 9:00 a.m. to 6:00 p.m. ET.
11111111
The SHARPER IMAGE® name and logo are registered trademarks.
©Sharper Image. All Rights Reserved.
1■11r
- 3 -
Loading...