Sharper Image Bluetooth VR Headset User Manual

BLUETOOTH VR HEADSET WITH EARPHONES

Item No. 205979

User Guide

Thank you for purchasing the Sharper Image Bluetooth VR Headset with Earphones. Please read this guide carefully and store for future reference.

- 1 -

FEATURES

•Built-in Bluetooth wireless headphones with immersive sound

•Fits smartphones with 4.7” to 6.2” (diagonal) screens

•New and improved interactive gaming button

•Built-in volume control and call answer button

•Adjustable focal point and lens distance

•Comfortable, adjustable head strap

HEADSET DIAGRAM	Bottom View	Top View
A. Adjustable Velcro and Nylon head strap
B. Built-in wireless headphones
C. Head cushion
D. Memory foam cushion
E. Adjustable focal point dial
F. Adjustable lens distance knob
G. Next track button
H. Previous track button
I. Multi-function button
J. Enclosure release button
K. Smartphone enclosure
L. Adjustable volume dial
M. Interactive gaming button
N. Micro USB charge port
O. LED indicator light

CHARGING THE HEADSET

The Bluetooth VR Headset with Earphones comes with a built-in rechargeable battery. Before using this device for the first time, we recommend you charge the battery fully. Only use the supplied USB cable to charge the device.

•Connect the USB side to a computer USB port and the Micro USB side to the charging jack of the headset. The red LED will illuminate while the device is charging. When the battery is fully charged, the LED will turn OFF

•A full charge may take up to 2 hours

•When the battery is fully charged, disconnect the charging cable. The device is now ready for use

NOTE: When the battery is LOW, the red LED will flash and you will hear 3 tones every 20 seconds. When this occurs, please charge the headset. When using an iPhone, the top right corner will display the battery life.

POWER ON / OFF

•Turn the power on by pressing and holding the multi-function button for 5 seconds, until the red and blue LED flash alternately

•To turn the power off, hold the multi-function button for 3 seconds, until the red and blue LEDs stop flashing

-2 -

PAIRING THE DEVICE

•Start with the device powered OFF

•Press and hold the multi-function button for 5 seconds, until the red and blue LEDs flash alternately. This indicates you are in pairing mode

•Place the headset and your smartphone in close proximity (about 3 ft. or less).

•Make sure Bluetooth is enabled on your smartphone (see manufacturer’s instructions if necessary)

•Once you have activated Bluetooth on your device, select the headset “SI Virtual” from the list of available Bluetooth devices

•If you are asked for a PIN code, enter 0000 and confirm the entry

NOTE: If pairing is unsuccessful, turn off the headset first and re-try the steps above. Once you have paired the headset with a mobile device, the headset will remember the device and pair automatically when the mobile device’s Bluetooth is activated and in range. You do not need to re-pair any previously connected devices.

TIP: If you do not wish to use Bluetooth you can plug in the built-in 3.5mm auxiliary line-in cable instead. Simply press the volume button to switch between Bluetooth mode and auxiliary line-in mode.

VIEWING VR APPS AND MOVIES

•Download a virtual reality (VR) app from the Apple iTunes App Store or Google Play. You can search using the keyword “VR”

•Install the app(s) on your smartphone. Be sure to read any instructions in the app before use

NOTE: Some apps may request you scan a QR code to set the profile of your headset. If asked, use one of these QR codes:

•Launch the app you wish to use

•Press the enclosure release button and insert your smartphone. You will need to adjust the device grips to fit your phone. Simply slide each grip to the left or right until your phone sits securely in them

•Close the enclosure once you have adjusted the device grips to fit. The enclosure will make a “click” sound when fully closed

-3 -