Sharper Image Automatic Claping Wireless Car Charger User Manual
AUTOMATIC CLAMPING WIRELESS CAR CHARGER
Item No. 207670
User Guide
Thank you for purchasing the Sharper Image Automatic Clamping Wireless Car
Charger. Please take a moment to read this guide and store it for future
reference.
- 1 -
FEATURES
• Compatible with all Qi-enabled devices for fast wireless charging, including iPhones
and Galaxy/Android devices
• Clips easily to your car air conditioner vent
• Rotates easily for horizontal or vertical viewing
• LED indicator light
• Overload protection keeps your device safe
• Overheat protection for additional safety
IDENTIFICATION OF PARTS
A. Automatic retractable arms
D
A
B. Intelligent sensing area
C. Phone cradle
D. Touch sensor
E. Air vent clip
F. LED status indicator
G. USB port
H. USB power cable (not shown)
INSTALLING THE MOUNT
1. Place the tightening ring over the vent clip ball joint.
2. Place the ball joint into the socket on the back of the car mount.
3. Screw the clip ring over the socket until the mount is securely attached to the vent
clip.
4. Squeeze the vent clip button until the clamp opens.
5. Clamp the mount onto your car air conditioner vent.
B
C
F
G
E
6. Adjust the mount angle by loosening the ball joint, then re-tighten the clip ring.
7. Connect the USB power cord to the USB-C port of the device.
8. Plug the other end of the power cord into your car’s USB port or car charging
adapter (car charging adapter not included).
9. The LED indicator light will be BLUE when the device is ready to charge your
Qi-enabled phone.
- 2 -
Loading...