Sharper Image 206635 User Manual
BBQ GRILL LIGHT AND FAN
Item No. 206635
User Guide
Thank you for choosing the Sharper Image BBQ Grill Light and Fan. Please take a
moment to read this guide and store it for future reference.
HOW TO MOUNT THE BBQ GRILL LIGHT AND FAN
1. Unscrew and remove the mounting
bracket bolts (1) from the upper and
lower mounting brackets (2) and (3).
2. Make sure the BBQ Grill Light & Fan is
centered across the grill handle (5) so
that it sits inside the openings of the
upper and lower mounting brackets (2)
and (3).
3. Partially screw in place the mounting
bracket bolts (1). Adjust the BBQ Grill
Light & Fan to your desired angle and
securely tighten bolts (1).
4. To adjust the distance between the BBQ
Grill Light & Fan and the grill, loosen
the adjustment knob (8) then slide the
product up or down on the adjustment
loops (7). When you’re satisfied, tighten
the adjustment knob (8) securely.
NOTE: It may be necessary to remove the
rubber spacers (4) from the upper and lower
mounting brackets if your BBQ grill’s handle
is too thick.
1. Mounting bracket
bolts
2. Upper mounting
bracket
3. Lower mounting
bracket
4. Rubber spacers
11. Fan control button
10. Light control
button
9. Light module
8. Adjustment knob
7. Adjustment
loops
6. Fan module
5. Grill handle
HOW TO USE
11. Fan control button
10. Light control
button
9. Light module
8. Adjustment knob
7. Adjustment
loops
6. Fan module
1. Mounting bracket
bolts
2. Upper mounting
bracket
3. Lower mounting
bracket
4. Rubber spacers
5. Grill handle
• Press the fan control button (10) to turn the fans (8) on and off.
• Press the light control button (11) to turn the light on and off.
• The fans (8) can be rotated individually for premium performance so that any smoke from the
grill can be safely deflected away.
• The light module (9) rotates for best lighting conditions while grilling at night—adjust as
desired.
BATTERY INSTALLATION AND REPLACEMENT
• Using a Phillips head screwdriver (not
included), remove screw (12) and lift the
battery compartment cover open (14).
• Install batteries according to the polarity
drawing indicated. Replace the battery
compartment cover (14). Make sure to
align tabs (13) and tighten screw (12)
securely to close.
12. Screw
13. Tabs
14. Battery
compartment
cover
NOTE: This product requires 8 x 1.5V “AA”
batteries (not included).
CAUTION – BATTERY SAFETY INFORMATION
• Do not recharge non-rechargeable batteries.
• Rechargeable batteries should only be
recharged under adult supervision.
• Do not mix alkaline, standard (carbon-zinc) or
rechargeable (nickel-cadmium) batteries.
• Old batteries should be removed and replaced.
• Do not mix old and new batteries.
• Do not dispose of batteries in fire—batteries may explode or leak.
• Do not dispose of the BBQ Grill Light & Fan in fire—batteries may
explode or leak.
• If this product will not be used for an extended period of time,
remove the batteries from the product.
• The supply terminals are not to be short-circuited.
• Batteries are to be inserted with correct polarity.
• Clean the battery contacts and product prior to battery installation.
• As always, dispose of batteries in an eco-friendly manner.
Loading...