Sharper Image 206085 Owner's Manual

FEATURES

COLOR WEATHER STATION

Item No. 206085

Owner’s Guide

Thank you for purchasing the Sharper Image Color Weather Station.

Please take a moment to read this guide and store it for future reference.

• Compact system displays time, date,
temperature and weather forecast

• Six weather forecast graphics (Sunny, Partly
Sunny, Cloudy, Rainy, Stormy and Snowy)

• Syncs with U.S. Atomic Clock

• Displays indoor and outdoor temperature
in °C or °F

• Barometric pressure display

• Displays indoor and outdoor humidity

• Displays time, date and day

• Digital alarm with snooze

• Automatic Daylight Savings Time update
(optional)

• Displays mood phase

• Low battery indicator

• Dimmable LED backlight

• Includes wireless weather sensor (requires
2 AA batteries)

• Battery backup (requires 3 AAA batteries)

- 1 -

FUNCTION OF BUTTONS

DEFAULT SETTINGS

When the device is first plugged in, the default settings are as follows:

Default time: 2015 / 12:00 / Thursday
Default temperature: °F
Barometer unit: hPa
Weather forecast: Partly Sunny

GETTING STARTED

• Place 2 AA batteries into the wireless weather sensor.

• Place or hang the sensor outdoors.

• The range is 150 ft. (50m) unobstructed. The wireless range may be reduced by
trees, walls, windows, etc.

• Do not place sensor in direct sunlight as this will give you an inaccurate temperature reading.

When you first insert batteries or plug in the device, you will hear 1 beep, then the device will go into
a self-test mode, then RF receiving mode (for weather sensor), followed by RCC receiving mode (to
sync with U.S. Atomic clock). This will take about 3 minutes.

- 2 -

If you would like the clock to set itself, simply leave it alone and it should sync overnight with the U.S.
Atomic Clock. Or, you may set it manually with the following steps:

TIME SETTING MODE

• In the time display mode, Press “MODE” for 2 seconds to enter time setting.
The value to be set will start flashing.

• Time zone setting: The default is EST. Press “UP” or “DOWN” to select
PST, MST, CST, EST, AST or NST.

• NST: Newfoundland Standard Time

• AST: Atlantic Standard Time

• EST: Eastern Standard Time

• CST: Central Standard Time

• MST: Mountain Standard Time

• PST: Pacific Standard Time

• Press “MODE” (or no key for 20 seconds) so exit and save the setting.

• Repeat this process to set the other values.

• Press “UP/RCC, MEM” to advance one step at a time. Or, press and hold it to advance
8 steps per second.

• Press “DOWN/CH” to go back one step at a time. Or, press and hold it to go back
8 steps per second.

• Press “MODE” (or no key for 20 seconds) so exit and save the setting.

ALARM SETTING MODE

• In standard mode, press “ALM” quickly to enter alarm mode.

• In alarm mode, press “ALM” to turn the alarm ON or OFF. The alarm icon will appear to disappear.

• In alarm mode, hold the “ALM” button to enter the alarm setting mode. The hour value will
begin to flash.

• The setting order is Hour >>> Minute >>> Exit.

• Press “UP/RCC, MEM” to advance one step at a time. Or, press and hold it to advance
8 steps per second.

• Press “DOWN/CH” to go back one step at a time. Or, press and hold it to go back
8 steps per second.

• Press “MODE” (or no key for 20 seconds) so exit and save the setting.

ALARM AND SNOOZE

The alarm will sound in the following sequence:

• 1 Beep for 1-10 seconds.

• 2 Beeps for 11-20 seconds.

- 3 -