Sharper Image 206064 Owner's Manual
FOOT AND LEG SPA
Item No. 206064
Owner’s Guide
Thank you for purchasing the Sharper Image Foot and Leg Spa.
The Foot and Leg Spa immerses your feet in a relaxing tub of warm water, making it the
perfect way to relax after a hard day. A foot soak soothes muscles, hydrates the skin and
relieves minor aches and pains. Try a long soak for easier exfoliating!
Please read this guide and store it for future reference.
FEATURES
• Adjustable temperature control — 95 °F to 122 °F
• Infrared heat
• Invigorating air bubbles
• Underwater automatic massage rollers
• Automatic shutoff timer (10-60 minutes)
• Aromatherapy: Add a few drops of essential oil to the tank (essential oil not included)
• Medicinal box: Add medicinal herbs for additional healing (herbs not included)
• Tablet box: Add herbal tablets for additional healing (tablets not included)
• Intelligent start function: When powered on, Surf/Heat function will activate automatically
and when the water reaches 108 °F, the Auto-Roller function will activate
• Removable cover for tank to keep water warm
• Convenient carrying handle and water drainage hose
• Accommodates women and men’s feet (up to men’s shoe size 12)
• 5’ power cord
• Locking wheels
- 1 -
IDENTIFICATION OF PARTS
A
B
C
A. Power: On/Off button
B. Display Screen: Displays water temperature, timer settings or off (“OF”)
C. Auto-Roller: Automatic foot rollers
D. Surf/Heat: Bubbles and heat
E. Temp. +: Increases water temperature
(max. 122 °F/50 °C)
F. Temp. –: Decreases water temperature
(min. 95 °F/35 °C)
G. Timer: Sets automatic shutoff timer
(10, 20, 30, 40, 50 or 60 minutes)
H. LED status lights: Indicate active features
I. Automatic massage rollers: Activate when
water temperature reaches 108 °F, or by
pressing the Auto-Roller button (the middle
and bottom rollers are automatic)
J. Water jets: Activate automatically when unit is
turned on, or by pressing the Surf/Heat button
K. Infrared heat: Activates automatically when unit
is turned on
L. Medicinal box
M. Tablet box
H
F
D
J
K
N
E
G
L
I
M
N. Locking wheels
OPERATION
1. Attach the wheels to the base of the unit.
2. Place unit on a flat, level surface. NOTE: Use this device in a seated position.
3. Lock the wheels so it does not move during use.
4. Fill the tank with warm water to the desired level (up to 6 gallons).
NOTE: Do not attempt to use this device without water or with freezing cold water, as this
will damage the unit. The minimum and maximum water level marks are indicated on the
inside of the tank. The water level should fall between those two marks. Do not overfill the tank.
5. Plug the unit into an AC outlet. The unit will beep once when plugged in to the outlet.
NOTE: Be sure your hands are dry when plugging in the unit.
6. Press the Power button to turn the unit on. The LED screen will display the current water
temperature. The appliance will automatically warm to the defaulted temperature of 108 °F.
NOTE: When turned on, the Surf/Heat function will automatically start. When the temperature
reaches 108 °F, the Auto-Roller massage function will automatically start.
- 2 -
Loading...