Sharper Image 204518 Owner's Manual

Item No. 204518

BLUETOOTH DIAMOND SPEAKER

Owner’s Guide

CHARGING THE SPEAKER

PARTS IDENTIFICATION AND FUNCTIONS:

Thank you for purchasing the Sharper Image Bluetooth Diamond Speaker.

Please take a moment to review these instructions and retain them for future reference.

• To charge Speaker:

• Insert one end of USB cable into PC or any

standard USB power adaptor.

• Insert other end of USB cable into USB Charging

Port on speaker.

• Red Indicator Light means Speaker is charging.

Light dims when fully charged.

• “Di Di Di” prompt every 30 seconds indicates

battery is low.

1. Hands-Free Button

• In Bluetooth mode:

• Press Button to pause and play music.

• When a phone call is incoming, voice

prompt will say “Incoming Call.”

• To answer call: Short-press the Hands-

Free Button.

• To refuse call: Long-press the Button.

• To hang up call: Short-press the Button.

• To callback last number: Long-press the

Button twice.

2. Microphone

3. USB Charging Port

4. Play/Pause Button

• I n Bluetooth mode, press Button to pause

and play music.

5. Power Switch

6. Previous Song/Volume Down Button

• When connected via Auxiliary Line-In

Port: Press Button to decrease volume.

“Di Di Di” sound indicates minimum

volume.

• When connected via Bluetooth:

• Long-press of Button decreases volume.

• Short-press returns to the previous song.

• Note: Default volume is set to 70%

7. Auxiliary Line-In Jack

8. Next Song/Volume Up Button

• When connected via Auxiliary Line-In

Port: Press Button to increase volume. “Di

Di Di” sound indicates maximum volume.

• When connected via Bluetooth:

• Long-press of Button increases volume.

• Short-press advances to the next song.

9. Indicator Light

• What the Indicator Light means:

• Rapidly flashing blue: Searching for

Bluetooth connection.

• Slowly flashing blue: Bluetooth

connection established.

• Solid red: Speaker is charging or in Line-

In state.

• Note: When charging, red light will dim

when fully charged.

The SHARPER IMAGE® name and logo are registered trademarks.

©Sharper Image. All Rights Reserved.

CUSTOMER SERVICE

Sharper Image branded items purchased from SharperImage.com
include a 1-year limited replacement warranty. If you require any
assistance with your Sharper Image Bluetooth Diamond Speaker,
please call 1 [phone].

TO MAKE BLUETOOTH CONNECTION: SPECIFICATIONS

IMPORTANT

1. Turn power on.

2. Listen for voice prompt: “The Bluetooth device is

ready to pair.”

3. Indicator Light will rapidly flash blue as Speaker

searches for a connection.

4. Select “YGH-6009” on the device you wish to

connect.

5. If requested, type the password 0000.

6. Listen for voice prompt: “The Bluetooth device is

connected successfully.”

7. When Bluetooth connection is established, the

Indicator Light will slowly flash blue.

To Make Wired Connection:

Connect device to Speaker with a standard 3.5mm

audio cable. Plug one end into headphone jack of

your device. Plug the other end into the Line-In

Jack on Speaker. Turn Power Switch on. Indicator

Light will turn solid red.

NOTE: While cable is plugged into Line-In Jack,

Bluetooth connectivity and all other functions

except Power Switch are disabled. Unplugging

cable from the Line-In Jack will return Speaker

to Bluetooth mode, and Speaker will pair with the

last device it was connected to. If no previously

connected device is found, the Speaker will return

to pairing mode. If no Bluetooth connection is

made within five minutes, the Speaker will enter

a standby mode.

Output Power: 3W

Db: >75dB

Transmitted Power: 4dB

Frequency range: 2.4GHz -2.48GHz

Power supply: Lithium battery 400mAh

Audio source: iPhone, iPad, Smartphone,
Notebook, MP3 player, etc.

Functions: Bluetooth, Auxiliary Line-In
audio input

Bluetooth version: Bluetooth 2.1 + EDR
compliant

Bluetooth Protocols Supported: HFP, HSP, A2DP

Wireless range: <10m

Sensitivity (TYP): -90dBm

Size: 82mm x 82mm x 58mm

Weight: 170g

Charges via: USB

USB Charging Voltage: DC 5V

Playtime per charge: 4hr at 50% volume

• Do not expose Speaker to high temperatures.

• Always try to recharge battery before it is fully

discharged. Remove charging cable as soon as

battery is fully charged.

• Turn off Bluetooth when charging battery.

• It is recommended not to use Bluetooth until

battery is fully charged.