Page 1
Wake-Up Light Alarm Clock Radio
with Soothing Sounds
Item No. 203662
Page 2
WELCOME
Thank you for purchasing the Sharper Image Wake-Up Light
Alarm Clock Radio with Soothing Sounds. This product is
designed to bring you many years of use and enjoyment. Please
take a moment to read this guide and familiarize yourself with its
many features and conveniences, so you can get the most from
this convenient device.
FEATURES
• Easy to set alarm clock with snooze function
• LED Light Box with 18 brightness levels
• Gradually illuminates 0-60 minutes prior to audio alarm
• Wake to beeping, FM radio or soothing nature sounds
• 8 built-in nature sounds: Birds, Rain Storm, Forest,
Farmhouse, River, Wind Storm, Ocean and Seagulls
• Digital FM radio with auto scan
• Sounds can play continuously if desired
• Sleep timer automatically shuts off the nature sounds or
radio after 15, 30, 45 or 60 minutes
• 12- or 24- hour time format
• Adjustable digital clock display (Off/Low
Brightness/High Brightness)
• Battery backup preserves settings in case of power
failure (CR2032 button cell battery included)
Page 3
NAME AND FUNCTIONS OF BUTTONS
Tap the Top of Unit Press Functions Hold 3 seconds
[SNOOZE / LIGHT] Turn on or off light box
Enter or exit demo mode
Side & Back Keys Press Functions Hold 3 seconds
[SOUND] Turn on and select sound
soother
Enter timer setting mode
[RADIO] Turn on or off FM radio Enter timer setting mode
[ALM] Display alarm time;
Enable or disable alarm
Enter alarm setting mode
[SET] Display time Enter clock setting mode
[VOL +] Increase volume level
Increase value in setting
Fast increase
[VOL -] Reduce volume level
Decrease value in setting
Fast decrease
[LIGHT +] Increase brightness level of
light box
[LIGHT -] Decrease brightness level of
light box
[TUNE +] Increase radio channel
frequency
Fast forward scanning
[TUNE -] Decrease radio channel
frequency
Fast backward scanning
[DISPLAY OFF/LO
HI]
Adjust clock brightness level
[RESET] Power reset to factory settings
Page 4
INITIAL SETUP
• Plug the AC adapter into the jack on the back of the unit,
then plug into an AC outlet.
• One CR2032 button cell battery is included. Remove the
battery compartment door and remove the plastic strip to
activate the battery.
CLOCK SETTING
After power on, your clock is now in clock display mode
• Press and hold [SET] to enter clock setting mode and set
the following 12/24 hour format > Hour > Minute > Exit
• Press [Vol +] or [Vol -] button to adjust setting and press
[SET] to confirm each setting
DISPLAY BRIGHTNESS
• Use the [DISPLAY OFF/LO/HI] slide switch to adjust the
orange display brightness or turn off the display
• When [DISPLAY OFF] is selected, press [SNOOZE/LIGHT]
will turn on display for 10 seconds
LED LIGHT BOX
• Press the top [SNOOZE/LIGHT] will turn on white light
gradually
• To adjust the light box brightness, press [LIGHT +] or
[LIGHT -] button to select between
1 to 18 brightness level
• - Press [SNOOZE/LIGHT] again to turn off the
light gradually
Page 5
NATURE SOUND SOOTHER
• Press [SOUND] button repeatedly to toggle between
one of the following:(
icon appears in the sound
soothing mode) #1 BIRD > #2 RAIN STORM > #3
FOREST > #4 FARMHOUSE > #5 RIVER > #6 WIND
STORM > #7 OCEAN > #8 SEAGULL > EXIT
• Press [VOL +] or [VOL -] button anytime to adjust the
volume level
AUTO-OFF SLEEP TIMER FOR NATURE SOUNDS:
In sound soothing mode, hold [SOUND] for 3 seconds to enter
the auto-off sleep timer setting mode.
icon appears
and press [VOL +] or [VOL-] to select between OFF, 15, 30,
45 & 60 minutes sleep timer. Press [SOUND] again to confirm
and exit sleep timer setting mode. The nature sound will turn
off automatically after the pre-set timer period.
FM RADIO
Extend and arrange the cable aerial on the back of the unit for
optimal radio reception.
• Press [RADIO] button to turn on FM radio
(
icon appears)
• Press [TUNE +] or [TUNE -] button to select your
radio channel frequency between 87.5 MHz to
108 MHz
• Press and hold [TUNE +] or [TUNE -] to auto-scan the
available radio channel
• Press [VOL +] or [VOL -] button anytime to adjust the
volume level
• Press [RADIO] button again to turn off the radio
Page 6
AUTO-OFF SLEEP TIMER FOR RADIO:
In radio mode, hold [RADIO] for 3 seconds to enter the auto-off
sleep timer setting mode.
icon appears and press [VOL +]
or [VOL-] to select between OFF, 15, 30, 45 & 60 minutes as sleep
timer. Press [RADIO] again to confirm and exit sleep timer setting
mode. The radio will turn off automatically after the pre-set timer
period.
ALARM
The clock features an audio and a visual alarm:
• Audio alarm: Beeping alarm, 8 selectable nature sounds
or FM radio
• Visual alarm: Sunrise lighting simulation appearing on the
light box and lights up gradually from orange to white
You may set an advance visual alarm timer (-10, -20, -30,
-40, -50 or -60 minute) in which the light will gradually
increase from zero to maximum brightness level before
your set alarm time.
For example, if you set 8:00am as your alarm time
and the advance visual alarm timer as -30 minute. The
clock will light up at 7:30am and gradually increase
its brightness. At 8:00am, it will reach its maximum
brightness and the audio alarm will sound.
• Alarm Setting: To enter alarm setting mode, press and
hold the [ALM] button to set the following in sequence.
Press [VOL +] or [VOL -] to select and press [ALM] to
confirm each setting
1. Hour
2. Minute
3. Visual alarm (ON/OFF)
- If Visual alarm ON is selected, continue setting #4
- If Visual alarm OFF is selected, continue setting #5
Page 7
4. Advance visual alarm timer (0, -10, -20, -30, -40, -50,
-60 minute) (If 0 minute is selected, the light will turn on
at the alarm time)
5. Audio alarm
#1 Bird
> #2 Rain Storm > #3 Forest > #4
Farmhouse
> #5 River > #6 Wind Storm >
#7 Ocean
> #8 Seagull > Beeping Alarm >
Radio Alarm
6. Radio frequency (87.5 MHz to 108 MHz)
- Press [VOL +] or [VOL -] repeatedly to select radio
frequency, or press and hold to auto-scan
7. Alarm volume level (level 1 to 16)
8. Exit alarm setting mode and the alarm is now enabled
(
icon appears)
• To display alarm time, press [ALM] button and the
icon will appear
• In alarm time display mode, press [ALM] button
repeatedly to enable or disable the daily alarm.
icon appears indicates alarm is enabled
• When alarm sounds, press [SNOOZE/LIGHT] to
activate snooze function for 10 minutes, or press any
side button to stop the daily alarm completely.
BACKUP POWER
This clock is backed up by one CR2032 battery (included). In
the event of a power failure, the clock will automatically switch
to battery mode and continue running in battery mode. To
save energy, only the beeping alarm will sound. The display,
light box and radio will become non-operational. Once the
power resumes from the adapter, all of the functions of the
clock will be available.
Page 8
SPECIFICATION
Light alarm clock:
Adapter: 5 V, 1.0A (included)
Backup batteries: 1 piece CR2032 (included)
CUSTOMER SERVICE
If you require any assistance with your Wake-Up Light
Alarm Clock Radio with Soothing Sounds, please call
1 (877) 714-7444 and select Option 3.
NOTE: SI PRODUCTS IS NOT RESPONSIBLE FOR ANY RADIO
OR TV INTERFERENCE CAUSED BY UNAUTHORIZED
MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS
COULD VOID THE USER AUTHORITY OPERATE THE EQUIPMENT.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and , if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Loading...