Sharper Image 203207 Owner's Instructions Manual

World’s Fastest Trimmer Shaver

Item No. 203207

Congratulations on your purchase of the World’s Fastest Trimmer
Shaver. This product is designed for many years of good
grooming. Before using, please read the following guide carefully
and retain for future reference.

NOTES

• Use only the charger that came with this item.

• Store this item above -35°F (5°C)

• Keep the charger dry. (Fig. 1)

• Unplug the charger before cleaning the shaver with
running water. (Fig. 2)

• Keep out of reach of children.

• Turn off the power and use the protective cover when not
in use.

NOTE: It may take several uses for your skin to get used to this device.
This is normal.

CHARGING THE DEVICE

• Make sure the product is powered off before charging.

• Insert the product charger into the device. (Fig. 3)

• The charger and the charging plug lamp light up. (Fig. 4)

• When the battery is fully charged, the shaver indicator
light will flash.

• Unplug the charger plug when the unit is fully
charged.

• Do not charge for more than 24 hours.

NOTE: A full charge will give you 60+ minutes of shaving time.

SHAVING

• Rotate the traveling lock to the “on” position.

• Move the pivoting smart touch shaver close to the
skin vertically and move it slowly against the growth
of your beard. The tightened skin will generally give
you a closer shave. (Fig. 5)

• Use the shaver’s protective cover after each use to

avoid damage. (Fig. 6)

NOTE: This shaver can operate approximately 20 days (at 3
minutes per day) on a full charge. If the battery is runs out, you
can also plug it in to an AC outlet.

TRIMMING

• Use the device for trimming temple and mustache.

• Push the slide face upwards to open the hair trimmer.

(Fig. 7)

CLEANING & MAINTENANCE

For best results, the shaver should be cleaned regularly. The

easiest and the most sanitary cleaning method is to rinse the

shaver head with water and hand soap after using the product.

WARNING: To avoid injuries caused by electric shock, unplug this device
from the AC outlet before cleaning it.

• Place a drop of hand soap on the shaver foil. Turn the
unit on for about 20 seconds to generate bubbles, then
switch it off. (Fig. 8)

• Press down the release buttons on both sides of the
shaver to unload the shaver head. (Fig. 9)

• Rinse the shaver head under running water. (Fig. 10-11)

• Close the shaver head and shake off excess water.

• Do not wipe the shaver head with a towel or paper
tissues, as this may damage the shaver head.

• Open the shaver head and allow it to dry. (Fig. 12)

NOTE: You may also use the included brush to clean the shaver head,
but no water should be used in that case.

TRIMMER

• Clean the trimmer each time after use.

• Turn off the power and unplug the device

• Clean the trimmer with the brush included. (Fig. 13)

• Lubricate the trimmer teeth with a drop of sewing
machine oil once every six months. (Fig. 14)

CHANGING THE FOIL

• The outer foil is designed for a long life, but it can be
changed if it becomes damaged.

• Using a tweezer, pull out the lock catch from one side of
the old foil, then press down to take out the broken foil.
(Fig. 15)

• Carefully replace the foil and press down to hear a
“click.” (Fig. 16-17)

NOTE: Do not bend outer foil. Do not use the shaver if the foil
is damaged.

ACCESSORIES

• The following accessories are included with the product:
Charger, Brush, Cloth Bag, Extra Foil.

ENVIRONMENTAL PROTECTION

• Dispose of this product and packaging in accordance
with local recycling regulations. Be sure to remove the
rechargeable battery first for proper disposal/recycling.
(Fig. 18-19)

CUSTOMER SERVICE

If you require any additional assistance with your device, please
call 1 [phone] and select Option 3.